The best iPad accessories for 2023

Accessories will be key whether you’re turning your new Apple iPad into a laptop replacement or just trying to protect it against daily-life hazards. It’s tempting to turn to Apple’s own accessories — and in some cases, you should — but there’s a slew of alternatives that work just as well and are often more affordable. We tested out a bunch of cases, keyboards, styli and other miscellany to see which iPad accessories are worth buying and that will help you get the most out of your iPad, from the iPad Air to the iPad Mini or a different iPad model.

Otterbox Symmetry 360 case

Otterbox is an expert when it comes to protection, as seen with their phone cases, but its Symmetry Series 360 series shows that it has design chops, too. Symmetry cases look similar to the Apple’s Smart Cover, but the clear, scratch-resistant back is sturdy without adding a lot of weight to the iPad. Plus, the edge protection is substantial, so you won’t have to worry about damage from the inevitable, accidental bumps your tablet takes. I also like the extra flap Otterbox added that keeps the iPad screen cover closed and holds the second-generation Apple Pencil to the side of the iPad Pros. Symmetry Series 360 cases are available for most iPad models, and while they’re more expensive than some no-name iPad case you might find on Amazon, they’re worth it if you want a great balance of protection and style.

Speaking of cheaper cases that fill up Amazon’s search result pages, some that are actually worthwhile are from Moko and ProCase. If you like the look and feel of Apple’s Smart Cover, but don’t want to drop $50-plus on one, both of these brands have dupes that give you that style at a fraction of the cost of the first-party option.

Shop Moko cases at AmazonShop ProCase cases at Amazon

Twelve South HoverBar Duo

Of the plethora of iPad stands I’ve used, Twelve South’s HoverBar Duo is the one that has come closest to perfect. The “duo” in the name refers to the fact that the gadget can either prop your iPad up using an arm attached to a weighted base, or the same arm just attached to a desk or table using its included clamp. The stand comes fully assembled on the weighted base, but it’s pretty easy to switch to the clamp thanks to the included instructions and basic tools in the box. If you spring for the latest model, it’ll be even easier thanks to a new quick-switch tab that lets you swap between the weighted base and the clamp attachment with any extra tools.

It wasn’t hard to secure my 11-inch iPad Pro in the vice-grip that is the HoverBar Duo’s tablet clip, although it did take some force to move the arm into the right position. That’s probably for the best because it showed how strong the arm is; it stayed in place without buckling, sliding down or otherwise breaking a sweat. I mostly used the HoverBar Duo with the clamp attachment, which allowed me to use my iPad as a secondary screen while working. The included clamp should fit most desks and tables too, as it can accommodate surface thickness from 0.4 inch to 1.4 inches.

If you’re willing to sacrifice flexibility for something more elegant, Elago’s P2 stand for iPad may be a good fit. It’s made of a single piece of aluminum with a ledge for your iPad and a few well-placed cutouts that you can snake a charging cable through. The ledge is also wide enough to accommodate most iPad cases. It may not be foldable or adjustable, but its minimalist design will make it an attractive addition to your desk.

Buy Elago P2 stand at Amazon - $20

Logitech MX Keys Mini

One of the best Bluetooth keyboards I’ve used recently is the Logitech MX Keys Mini. It’s not designed specifically for the iPad, but it works quite well with it. It combines a lot of the ergonomics and the general look and feel of the MX lineup into a compact and portable keyboard. The Keys Mini has a slim profile that’s slightly raised due to its top bar, plus comfortable backlit keys that are a dream to type on. The backlight is one of my favorite features because it automatically comes on when it senses your hands getting close to the keyboard. That way it only stays illuminated when you’re typing, conserving battery life in the long run. Logitech estimates the Keys Mini will last up to 10 days, depending on backlight use, or up to five months without any backlight use.

Logitech’s $100 MX Keys Mini may be on the expensive side, but it’s one that could be both your iPad keyboard and your main desk typing device. It can connect to up to three devices at the same time, allowing you to swap between them quickly with just a press of a key, and it has a few other handy keys too like one that brings up the emoji picker and another that mutes your microphone (quite useful on Zoom calls). But if you want something even more affordable, or even thinner, we still like the Logitech Keys to Go, which we’ve recommended in the past and you can usually find for between $50 and $70.

Buy Logitech Keys to Go at Amazon - $60

Apple Magic Keyboard for iPad

If you really want to indulge, Apple’s own Magic Keyboard is the way to go. This expensive case magnetically attaches to the latest iPad Pros and keeps them “floating” above the keyboard and trackpad. We praised the Magic Keyboard for its typing comfort and precise trackpad, but dinged it for its limited range of motion. It’s easily the fanciest keyboard available for the iPad and it’s one to consider if money is no object — or if you want the most stylish iPad keyboard money can buy.

Apple Pencil

This likely won’t come as a surprise, but the Apple Pencil is the best stylus you can get for the iPad. Both the first- and second-generation Pencils are designed to work specifically with iPads and it shows in their smooth writing performance. The second-gen stylus has a double-tap feature that you can customize to a certain degree, and pressure-sensitivity allows you to add as much or as little detail as you want to digital artwork. I highly recommend shelling out $100 or $130 for the Apple Pencil if you’re an artist — you won’t be disappointed.

Buy Apple Pencil (1st gen) at Amazon - $99

Logitech Crayon

There are other options that are more affordable than the Apple Pencil, though, like Logitech’s $70 Crayon. It’s just as good in terms of latency and accuracy — drawing in Procreate was a lag-free experience and my strokes always ended up exactly where I wanted them to be – and it’s even more grippy by default thanks to its oval-shaped design. But as someone who primarily uses an Apple Pencil for digital art, I missed pressure sensitivity when using the Crayon.

Aside from that, the other biggest annoyance is that you have to use a Lightning or USB-C cable to charge it. (Even the newest model for the iPad Pros doesn’t magnetically attach to the tablet for charging.) While I wouldn’t suggest the Crayon for serious artists, I would recommend it for anyone who’s on a strict budget, especially digital journal-keepers, committed note-takers and the like.

Paperlike screen protector

If you’re a heavy user of the Apple Pencil or some other stylus, you should consider getting a screen protector for your iPad. They pull double-duty: Not only do they act as a first line of defense if your iPad goes careening onto the concrete, but they can also enhance the digital drawing and writing experience. Using a stylus on an iPad is strange at first because gliding the stylus nib over a glass surface feels nothing like “normal” writing. Matte screen protectors can get closer to replicating the pen-on-paper experience, and they also prevent the stylus nib from wearing down so quickly. Paperlike is the most popular in this space, but Bersem’s screen protectors are a great value at $11 for a pack of two. Not only does the matte finish help when you’re drawing or taking digital notes, but it also reduces screen glare and doesn’t interfere with FaceID on the newest iPads.

Buy Bersem screen protector (2 pack) at Amazon - $11

Satechi Aluminum Stand and Hub

If you plan on pushing your iPad Pro to its limits as a daily driver, you’ll probably need more than the tablet’s single USB-C port. Apple has provided little guidance to which USB-C hubs and adapters work best with the iPad Pros — there’s no MFi certification for accessories like this yet. Some hubs specifically advertise that they work with the newest iPad Pros, and if you want to be extra safe, I recommend buying one of those that comes from a reputable brand.

Satechi’s $100 Aluminum Stand and Hub is a favorite for its foldable design and how it packs ports and charging capabilities into a compact iPad accessory. The holder itself rotates outward, revealing a hidden, attached USB-C cable and a rubber bumper that keeps the stand in place in your desk. On the back edge are a 4K HDMI socket, one USB-A port, a headphone jack, both SD and microSD card slots and a 60W USB-C connection for charging.

I liked the versatility of Satechi’s hub. I could easily use it when I needed to prop my iPad up to watch a YouTube video, and by just plugging in the attached cable, I could switch to using my iPad as more of a work device with all of the necessary connectors in place. It’s also surprisingly light at 10 ounces. Combine that with its foldable design and you have a full-featured hub that can easily be stuffed in a bag.

Anker 7-in-1 USB-C hub

Not everyone needs, or wants, to spend $100 on a dock for their iPad. (If you’re using it as a laptop replacement, it’s worth the investment.) If you’d rather spend less, or just want something a bit more lightweight, Anker’s 7-in-1 USB-C hub is a good choice. It has most ports that you could ever want, with the only exception being an Ethernet jack. The slim dongle houses two USB-A ports, two USB-C connections, SD and microSD card slots and a 4K/30Hz HDMI port. We also like that it provides up to 85W of pass-through charging, which means you can power up your iPad while using Anker’s hub as the main connector between the tablet and its charging cable. Anker makes a couple of versions of this hub, including one that does have that coveted Ethernet port, but it’s hard to beat $35 for the standard 7-in-1 model.

Buy Anker 8-in-1 hub at Amazon - $80

Samsung T7 SSD

It can be hard to anticipate how much storage you’ll need in your iPad. Maybe you picked up the base model, but over time the device has turned into your main gadget, holding most of your important documents, photos, apps and more. If you have one of the latest iPad models with USB-C, you can use that port to connect the device to an external drive, offloading files and freeing up onboard space on your device. We like Samsung’s T7 series of portable SSDs for their slick designs, fast speeds and various modes of protection. The T7, the T7 Touch and the T7 Shield all support read/write speeds of up to 1,050/1,000 MB/s, and their palm-sized designs make them easy to toss in a bag before you leave for the day. All three also support AES 256-bit hardware encryption and optional password protection, but you’ll get the added bonus of a fingerprint reader on the T7 Touch. As for the T7 Shield, it’s the newest in the lineup and has a more durable design with a rubberized exterior and an IP65 rating for water and dust resistance.

Buy Samsung T7 Touch (1TB) at Amazon - $160Buy Samsung T7 Shield (1TB) at Amazon - $160

Anker Nano II 45W GaN charger

Apple and other tech companies are increasingly leaving wall adapters out of their devices’ boxes, so it’s worth picking up a couple that can handle charging a couple of pieces of tech as quickly as possible. Anker’s 45W Nano II GaN adapter is a good one because it can fast-charge iPhones and iPads, plus the gallium nitride technology built into it helps prevent overheating. In just a half hour of charging, I got about a 33 percent boost in battery life on my 11-inch iPad Pro when using this accessory. Gallium nitride is also a big reason why the 45W adapter is smaller than a lot of competing adapters available now, including Apple’s. We also like its foldable design, which will allow it to fit better in cramped spaces and in travel bags.

Anker PowerCore 26,800

It’s smart to have a portable battery with you when you’re using your iPad on the go – regardless of if it’s your daily driver or you’re only using it for a few select tasks. Anker’s PowerCore 26,800 has a high enough capacity to charge up most tablets almost two times over, making it very unlikely that you’ll totally run out of power before you get to your next destination. While it won’t charge laptops, it will work for most mobile devices, and it has three USB-A ports so you can power up to three devices simultaneously. And since the brick itself weighs just over one pound, it won’t weigh down your bag all day long, either.

This sleek iPad USB-C hub features six different media ports + a shortcut key for uninterrupted workflow!

HyperDrive is the world’s first-ever form-fitting USB-C hub with six different media ports and a media shortcut key.

USB-C media ports are designed to get the sh*t done that our computers can’t. Whether you use them for media storage, to transfer files, adapt to external hardware, or all of the above–media ports can do it all. They can do so much, we sometimes forget their limitations. While most USB-C drives on the market host around four media ports, a new USB-C drive from Hyper called HyperDrive features six media ports in addition to a media shortcut key. In a few words, for HyperDrive, the limit does not exist.

Compact enough to fit in your palm, HyperDrive is small but mighty. Equipped with a 4K60Hz HDMI port, USB-C 5Gbps 60W Power Delivery port, MicroSD UHS-I port, SD UHS-I port, USB-A 5Gbps port, and a 3.5mm Audio Jack, HyperDrive can handle any of your cables at any time. While you’re all plugged in and working, the built-in shortcut key allows you to “play, pause, fast-forward or rewind your favorite songs, videos, or podcasts without interrupting your workflow.”

Included in all of this are crystal clear video and content displays thanks to HyperDrive’s 4K60Hz HDMI port that allows for double the normal refresh rate. Then, when you’d like to transfer files from one device to HyperDrive, or vice versa, its UHS-I to MicroSD/SD slots makes the process lightning fast, moving as quickly as 104MB/s. HyperDrive also grips tightly to your external device with a Magnetic Grip that links HyperDrive with the side of your USB-C iPad Pro, Air, or mini.

Designer: Hyper

Click Here to Buy Now!

Magnetic grips allow HyperDrive to securely attach to any external device. 

With its media shortcut key, HyperDrive allows you to work and listen to music without interruption.

With its 4K 60Hz HDMI connection port, HyperDrive transfers images and video files with the same quality they came with.

Expand your iMac 24” connectivity with a front-facing USB hub that matches your Apple device color!

If the iMac 24-inch model has one disadvantage, it has to be the USB ports on the back. the HyperDrive accessory with color correct front-facing module for sure gets over that problem for good.

The sleek, colorful and stylish-looking M1-powered iMac 24-inch model is for the most part great – that is until you are left groping around the back for the USB port to attach an external hard drive, security key or memory card. That paucity of the Apple machine is now fixed with a third-party accessory by Hyper that’s mindfully designed – to say the least. If you happen to own the cheapest model of the iMac 24-inch that has only two Thunderbolt/USB 4 ports, then this makes even more sense.

Even though the more expensive configuration models add a pair of USB 3 ports, they still lack an SD card slot for times when you need to use it. HyperDrive 6-in-1 USB-C Hub for iMac 24” is the savior with five front-facing ports for the easiest access to memory cards, USB storage, and charging of gadgets. It even has a 4K monitor compatible HDMI port on the back to keep away the thick cords from view. Mindful design indeed, I must say again!

Keeping up with the modern data transfer requirements the accessory has 3 USB (two USB-C and one USB-A) ports capable of 10Gbps transfer speed. For added advantage, the hub has a universally compatible microSD UHS-I reader and SD UHS-I card slot. Charging your gadgets is also going to be a breeze with 7.5W speed compatibility from the USB-A port.

The USP of HyperDrive hub is the way it clamps onto the iMac, seamlessly blending with the footprint of the machine and bringing the practical front-facing usage. The best part I like is the seven faceplates with each hub to match the different colored Apple iMac 24” models. Not only do they look good, but make your digital life smooth without any frustrations of coming short on available ports every now and then. Certainly, the accessory priced at $79.99 is better than any other available on the market.

Designer: Hyper

Click Here to Buy Now!

 

The best iPad accessories for 2024

Once you’ve decided which iPad you want, the next step is finding the right accessories. For getting work done, you’ll likely want a mouse and keyboard. For drawing and note-taking, a stylus is the obvious choice, but we also recommend a paper-like screen protector for added texture. Power banks let you recharge your slate whenever you need to and a hub helps you get the most out of your iPad’s processing power with connections for wired peripherals. After testing (and owning) iPads over the years, we’ve singled out a dozen-plus accessories that help expand what Apple’s tablets can do.

Which iPad generation do you own?

Before you splurge on a bunch of accessories, you should double check which iPad generation you own. There are a couple of ways to do this: first, you can check the back of your tablet for its model number, which will start with an “A” and end with a series of numbers. You can also go into Settings on your iPad, then General and look up the model number in the top section. If you see a series of letters and numbers with a slash (“/“) in it, just tap that to reveal the iPad’s true model number.

The most recent iPad is the 10th-gen iPad, which was released in 2022, but Apple still sells the 9th-gen iPad as well. Other iPad models include the 5th-gen iPad Air, the 6th-gen iPad mini and the 6th-gen iPad Pros. Apple usually announces new iPads in the fall after its iPhone event, but it’s unclear if the company will do so this year.

The most important iPad details to consider before buying accessories are the charging port, screen size and Apple Pencil compatibility. Most iPads now have USB-C charging, save for the 9th-gen iPad that still uses a Lightning connector. Make sure to double check your iPad’s screen size before buying a case or a screen protector. As for the Apple Pencil, both the 9th- and 10th-gen iPad support only the 1st-gen stylus, while all other iPads can use the 2nd-gen Apple Pencil.

Paper-feel screen protectors

If you’re a heavy user of the Apple Pencil or some other stylus, you should consider getting a screen protector for your new iPad. They pull double-duty: Not only do they act as a first line of defense if your iPad goes careening onto concrete, but they can also enhance the digital drawing and writing experience. Using a stylus on an iPad is strange at first because gliding the stylus nib over a glass surface feels nothing like “normal” writing. Matte screen protectors can get closer to replicating the pen-on-paper experience, and they also prevent the stylus nib from wearing down as quickly.

This article originally appeared on Engadget at https://www.engadget.com/best-ipad-accessories-130018595.html?src=rss

The best accessories for your new iPad

Accessories will be key whether you’re turning your new iPad into a laptop replacement or just trying to protect it against daily-life hazards. It’s tempting to turn to Apple’s own accessories -- and in some cases, you should -- but there are slews o...

Making your smartphone smarter

hyperdrive_3in1_1

I still live with a 16gb phone. It isn’t impossible, but it’s difficult. The world isn’t moving towards adapting to low storage, it’s increasing it. So what do you do when you run low on storage? Delete photos and apps? NO! Back everything to the cloud? You could, but you’d need constant access to it to retrieve data. What else can you do? Transfer it to your laptop via cable? Sure, but who’s got the time for that. You could maybe use an OTG pen-drive… but not many people have those.

With Type-C USB ports becoming increasingly popular, there’s one more solution. The Hyperdrive Type-C connection kit. It easily fits in your pocket, and expands your phone’s possibilities. Plug it in, and you’ve got a regular USB port, and two card-readers for SD and MicroSD cards. You can now literally plug any USB drive into your phone and either transfer data to it, or retrieve data from it. Or you could use the SD card reader to pull photos off your DSLR. What’s better is that the Hyperdrive’s Type-C works with laptops too. With most new laptops having a Type-C port for fast transfers and faster charging, the Hyperdrive plugs into your laptop too, not just expanding the number of ports on it, but even allowing you to easily transfer data between your laptop and phone. Without a cable!

Designer: Sanho

BUY NOW

hyperdrive_3in1_2

hyperdrive_3in1_3

hyperdrive_3in1_4

hyperdrive_3in1_5

BUY NOW

Upcoming ‘No Man’s Sky’ patch will fix most issues

No Man's Sky was released for PlayStation 4 last week, but not without its fair share of problems. Developer Hello Games is aware of the game's many bugs and glitches, and is working on a patch that will solve "the most critical issues" in the "near...

Switched On: Big kicks, not all for starters

Each week Ross Rubin contributes Switched On, a column about consumer technology.

Image

The end of last week's Switched On left doubt for the future of dedicated devices that tread on the turf of smartphones. After all, funding is key to every major new product initiative and, despite the vast fortunes of many Silicon Valley engineers that have been accumulated via IPOs and acquisitions, few wish to take on the risk of fronting a new consumer device themselves.(In 2007, the handheld FlipStart PC was hatched from FlipStart Labs, funded by Vulcan Ventures, the investment arm of Microsoft co-founder Paul Allen.)

Most venture capitalists abhor the device business; it is a rare device that makes it to the spotlight of startup debutante balls such as DEMO, TechCrunch Disrupt, or Launch. Even most of the 94 companies at CES' Eureka Park were not developing end-user devices Where, then, can a device entrepreneur go for funding and pick up some publicity in the process?

Continue reading Switched On: Big kicks, not all for starters

Switched On: Big kicks, not all for starters originally appeared on Engadget on Sun, 29 Apr 2012 17:30:00 EDT. Please see our terms for use of feeds.

Permalink   |   | Email this | Comments