Compact UV-sterilization chamber keeps your razor disinfected and germ free before and after use

The razor and the toothbrush are arguably the two products that are most closely intertwined with your body, which is why keeping them infection and germ-free goes a long way in ensuring you stay healthy as well as hygienic (and groomed). Rather aptly named ‘Purity’, this tiny razor-sterilizer both holds and disinfects your shaving razor before as well as after use. The USB-C-powered box holds one razor at a time (although you could try putting a toothbrush in there too), and sterilizes it for 30 seconds, allowing UV-C light to neutralize any microorganisms lurking around on the surfaces of the razor. 30 seconds later, the razor is as sterile as it can possibly get, and can be used on the skin without risking infection.

Designer: Wonjun Jo

We’ve seen our fair share of UV sterilizers, and at least technically, the Purity is no different. Designed to be a compact chamber that blasts objects with powerful UV-C light, Purity was designed to sit mounted on a wall and hold the traditional T-shaped razor while you’re not shaving. Its unique chamber design leaves a lot of room on the top, going to show that the Purity could be used for toothbrushes too, or maybe other tiny objects like rings, earrings, etc.

Using Purity is as simple as placing the razor in and pressing the ‘Reset’ button to activate the UV-C light and begin the 30-second timer. The door on the Purity stays closed thanks to magnets on the top and bottom, although there doesn’t seem to be a locking mechanism for the door. One could just assume that the UV-C lamp automatically turns off if someone prematurely opens the door, given that UV-C light can be harmful when exposed to the skin.

The Purity charges via USB-C, making it easy to juice up with your regular smartphone or power bank charger. Given that the battery primarily powers just a UV-C LED lamp, I’d imagine the battery capacity on this little razor sterilizer easily lasts for weeks, if not months.

The post Compact UV-sterilization chamber keeps your razor disinfected and germ free before and after use first appeared on Yanko Design.

Giant Metal Razor Blades: For the Quickest Shave

Because art means different things to different people, Lance Barnett of Etsy shop BarnettPrototyping creates giant reproductions of double-sided razor blades. While typical razor blades measure about 1.5″ wide, these measure a respectable 5″ wide, 2.75″ tall, and 0.25″ thick – more than three times the size of a normal blade. Now I should be able to shave my entire face with only two or three strokes total!

Available in stainless steel ($50), brass ($74), and titanium ($125), the blades feature a beveled but unsharpened blade for safety purposes. I mean, you weren’t actually going to try shaving with one, were you? Because I was. Otherwise, what’s the point?!

Lance suggests the giant blade can be used as a scraper, paperweight, desk object, conversation piece, or even sharpened and used as a knife. He never explicitly suggests you use it as a weapon, but I’m great at reading between the lines. Or, should I say, misreading between the lines. Help post my bail?

This aerospace aluminum single-edge razor’s sleek design draws inspiration from Ferrari’s racecars




Taking inspirational cues from Enzo Ferrari’s vision to revolutionize the world of transportation back in 1940, the HypeBody is a razor that looks less like a men’s grooming tool and more like the chassis of a sportscar. Drawing on two of the most quintessentially masculine areas of interest (racecars and shaving gear), the HypeBody wants to turn shaving gear into something as luxuriously sexy as driving a Ferrari. With their CNC-machined aluminum frame, minimal monocoque design, and clean, user-friendly experience… it’s fair to say that HypeBody’s razors have nailed that brief.

Designers: Paolo Pardini & Vivek Thakkar

Click Here to Buy Now: Full Set for $140 $200 (31% off). Hurry, only 10/121 left!

The HypeBody razors combine the best bits of cartridge razors (their sheer convenience) and safety razors (their immaculate clean shave) into one slick-looking package. The razor weighs a mere 67 grams, putting it squarely in the cartridge razor category, but comes with the single-blade shaving experience of a safety razor. The form, angles, choice of material, and weight were directly informed to appeal to cartridge razor users, say designers Paolo Pardini & Vivek Thakkar.

The unique silhouette and incredibly lightweight design flatten the learning curve for cartridge razor users, allowing them to easily make the switch. The single-blade design offers its own set of merits too. Unlike your conventional multi-blade razor (Gillette and the like) that ends up taking off a layer of skin along with the hair too, causing skin rashes, razor burn, and ingrown hairs, the single-blade design gives you a close, clean shave without irritating your skin or causing painful ingrown hairs (there’s an entire ‘The Office’ episode dedicated to this).

The HypeBody is a confluence of good design and engineering packaged in a razor that looks and feels deceptively simple. Available in two variants, the ME1 (a blend of premium and affordable) and the X1 (a premium razor for refined tastes), the HypeBody comes with a simple design that lets you choose whether you want to use the company’s cartridge razors (that load and unload easily) or any independent blade magazines like Schick or Personna (helping you effectively save money in the long run).

Each razor comes with a swappable series of pop-on accessories that let you choose the kind of shave-setting you want – a ‘Sensitive’ setting for people with irritable skin or first-time shavers, a ‘Comfort’ setting for your average use, and an ‘Ultra Close’ for people who desire the perfectly clean look. The shave setting attachments snap on either mechanically (in the ME1) or magnetically (in the X1), letting you easily cycle between shave types, while the razor’s ergonomic and lightweight design lets you get that quick clean shave every single time. It’s fair to say that the magnetic snapping feature is immediately reminiscent of Apple’s MagSafe, offering the same premium tactile experience of a satisfying snap to lock the two components together.

The HypeBody’s ease-of-use is only reinforced by how simple its design is. Crafted with an edgy minimalist exterior (You can’t deny the Cybertruck vibe it gives off), the razor comes with a 2-arm design that provides a better grip around the razor (along with the slip-resistant anodized finish), while additionally having a negative space in the middle to drive home the razor’s lightweight design. The negative space in the handle is perfect for HypeBody’s add-on triangle-shaped razor holder, which is made from the same aerospace-grade aluminum as the razor, along with a slick shaving brush to match. The pure metal design immediately propels the HypeBody razor into the ‘premium’ category – fitting for a razor inspired by high-end racecars – while also making it waterproof and mind-bogglingly durable (the razor comes with a 100-year guarantee). The ME1 razor ships with the press-to-fit shave setting attachments and comes in Acid Green, Lamborghini Orange, or Ferrari Red anodized finishes, while the upper-echelon X1 sports a single metallic finish that pairs beautifully with the three magnetic snap-on shave setting attachments.

Shipping for anywhere between $72 to $85 (for just the ME1 and X1 razors), HypeBody’s business model is distinctly different from those of cartridge razor companies like Gillette too. While other brands sell their razors cheap but make money off the blades, the HypeBody aims at being more affordable in the long run. Not only does the razor come with a 100-year guarantee, each HypeBody ships with 20 blades free, giving you an entire year’s worth of shaving just out of the box. The razor’s compatibility with off-the-shelf blade magazines also means you get the freedom to choose your own blade brand instead of being locked into a single brand for the rest of your life. You can grab your own HypeBody razor using the link below and they’ll begin shipping in February 2022.

Click Here to Buy Now: Full Set for $140 $200 (31% off). Hurry, only 10/121 left!

The post This aerospace aluminum single-edge razor’s sleek design draws inspiration from Ferrari’s racecars first appeared on Yanko Design.

This biodegradable razor let’s lead a ‘cleaner’ & more sustainable lifestyle!

Disposable razors are made of plastic and contribute heavily to waste and pollution. In fact, as per the report Award Catalogue 2020 of BEYOND PLASTIC, about 5,000 billion disposable razors are used per year globally – can you imagine that many razors in front of you for a second? That is an island-worth of waste and we are constantly looking for designs that remake sustainable versions of daily objects so that we are a step closer to solving this problem. Oquari is a biodegradable razor with comes with interchangeable heads that aim to provide a sustainable alternative that can help reduce the burden on the environment.

The razor is made with PBS Bionelle as well as stainless steel blades as part of a regenerative approach and it degrades in aquatic environments. Its design is specifically geared at reducing manufacturing processes and facilitate the separation of its elements at the end of its life so that it becomes an accessible, attractive, and economical product without being recognized as “disposable” which the team refers to as  ‘monstrous hybrid’ – a term coined by Michael Braungart and William McDonough for a product, component, or material that combines both technical and organic nutrients in a way that cannot be easily separated, thereby rendering it unable to be recycled or reused be either system. Most monstrous hybrids can only be thrown out and contribute to the waste stream and cannot be reused and therefore it is important to not view Oquari as a ‘disposable’ razor but rather as a sustainable alternative to the disposable razors.

“This is why we wanted to focus on a product that most people use while creating a dramatic environmental impact on our planet. Disposable razors, this kind of product has specifically a combination of plastics and elastomers. Which is rarely restore or recycled because of how difficult and expensive is. As part of our brief, we establish sustainable objectives that follow 7 of the 11 Rs of the R-Ladder: refuse the combination of monstrous hybrids, redesign better detachable pieces, rethink the concept of a disposable razor, reduce the use of plastic, reuse the razor for a long time, remanufacture materials for its use in other industries and recycle the package when disposed,” says the team,

Oquari creates a positive social-environmental impact because of the reusable handle that spreads awareness about the plastic waste problem. It encourages you to apply waste recollection strategies while generating more active learning and participation. Fairtrade is also ensured for users from socioeconomic sectors C and D because Oquari is made to be affordable. In addition, the constant consumption of blades ensures fixed income to the company. “Because our handle is reusable, raw material production and manufacturing costs are reduced. Likewise, waste decreases and benefits other industries by recycling discarded blades,” the trio elaborates. A sustainable lifestyle shouldn’t e a status symbol but rather an accessible choice so we can create a larger impact much faster.

Designer: Karla Valencia, Guillermo Miranda, and Erik Rodríguez

World’s first paper disposable razor unveiled in Japan

This gives a completely new meaning to the word ‘papercut’! Say hello to the Paper Razor, a sustainable alternative to the disposable plastic razor. The Paper Razor, as its name suggests, comes with an all-paper body and sports a metal blade-head on top. Designed to be flat-packed, the single-use razor comes completely unfolded and can easily be put together in a matter of seconds by merely folding in the sides and the top to create a rigid, ergonomic razor with a grippy handle. Its origami-inspired design gives it as much strength and maneuverability as a plastic razor, while minimizing the use of plastic by as much as 98%. The result? A razor that can be easily flat-packed and shipped, used, and then disposed of… safely, of course.

You’re obviously wondering, how would a paper razor fare under exposure to water? Well, the fine folks at the Japan-based Kai Group fashioned the Paper Razor out of a relatively water-resistant grade of paper – keeping durable milk cartons and cardboard paper-spoons in mind. The handle can withstand water temperatures of up to 104°F (40°C), allowing you to shave with lukewarm water, and the metal head even features a notched channel on top that makes it easy to rinse shaved hair off the blade every few strokes. Designed ideally for travelers, the single-use Paper Razor offers a much more ecologically-conscious alternative to those disposable all-plastic razors. The overall razor weighs a mere 4 grams, comes in a flat-pack that’s no more than 5mm thick, and is available across 5 different colors – ocean blue, botanical red, jade green, sunny yellow, and sand beige.

Designer: Kai Group

A razor that’s as smooth as silk

The products that we interact with daily are deserving of a little more attention to their design; the more we see a product, the more critical we become of the design. A perfect example of this is a razor; whilst fundamentally its purpose is very straight-forward, the simplicity of this can lead to unique visuals to be created!

The Silk Razor carries an invitingly elegant form that has been inspired by the graceful flow of silk. The free-flowing form that creates the asymmetrical razor allows light to beautifully dance over its contours; this natural and constantly changing form of detail leads to a visual spectacle that inspires you to observe its aesthetic.

Designer: Guoyin Li

YD’s top 10 entries from the #renderweekly razor challenge

If you’re an industrial designer who hasn’t heard of Render Weekly, stop everything you’re doing and head down to their website to have a look at the community of designers and render-artists who come together week after week to showcase their talents in modeling and rendering. The idea is simple. Render Weekly suggests a product every week, and you have a week to upload your work on Instagram with the hashtag #renderweekly. The best designs get picked and showcased on Render Weekly’s Instagram account, and their modelers/renderers get immense designer street-cred.

The prompt for Week 45 was Razor. Pretty open ended if you ask me. Designers were required to design as well as model and render out their razor concepts and the results ranged from sleek and minimal, to chunky and masculine. Some designs even redefined the razor as we knew it. Among hundreds of entries, we picked our favorite ten based on their concept, choice of material, CMF, and lighting!

Credits: Render Weekly


Jake Lee’s Z-Razor is simple, beautiful, and looks like it would be an absolute pleasure to hold and use. The stainless steel body comes with its share of curves and a nice weighted design that looks like it would feel great to grip. The blade has an innovative docking mechanism too, and can be easily ejected with a simple click of a button.


Jonathan Welch’s razor is as simple as they get. Made entirely from metal, and with an incredibly slim body, Welch’s razor wouldn’t be as grippy as Jake’s Z-Razor, but it does look incredibly desirable, and even features a rotating razor-head that lets you maneuver the blade easily across your jaw.


This razor designed by Kevin Klöcker actually champions portability. It features a swiveling razor-head that rotates 90° to vertically align with the handle, allowing the razor to become as thin as a pencil, allowing it to slip easily into toiletry bags or your luggage compartments without occupying any space. When you need to shave, open the razor out into its ‘T’ shaped format and the razor clicks back in place, holding its shape until you press a button on the back to close the razor down to its slim ‘I’ shaped form.

Seoul-based Hyunsol Park decided to channel a leManoosh vibe with his use of form, close-up renders, and a design language that’s universally appealing. The razor also features a weighted flat base that allows it to stand vertically when not in use, and a rather interesting silicone neck that connects the razor to the handle, allowing the razor-head to flex ever so gently to follow the contours of your face as you shave.


Another champion of portability, the Pill razor by Jeffrey Lee is a completely different concept. Designed to be a vertically oriented electric trimmer, the Pill slides easily into pockets and backpacks, letting you carry it around just as easily as you would a pen. Pop its magnetic cap off and the Pill begins working. Hold the mesh against your stubble and the Pill trims your beard, giving you a neat, clean shave. Pop the cap on and voila, the Pill turns off! The area below the razor not only serves as a handle but also houses the AA battery that runs the razor.


Max Syme’s brass razor looks retro but also reliable. There’s a certain masculine comfort in the way Syme’s razor looks. Does it have something to do with its robust looking Y shape? I don’t know. The razor is made from solid brass, features a slightly distressed look for that macho touch, and comes with a knurled handle that’s great to hold onto as you run the razor across your jawline.


Dave Joseph’s razor features a Y frame too, but captures a completely different spirit. Warm, inviting, and friendly, Dave’s razor design features a plastic body that’s absolutely rendered to perfection. The material, its roughness, self-reflections, and color are simply spectacular. Modeled with TSplines in Fusion and rendered in Keyshot.


One of the few straight razors to get submitted in this challenge, Mehmet Ergul’s razor design features a hollow, hub-less rotating hinge, and a beautifully organic texture on the handle that stands out against the blade’s angular, geometric design. The hollow hinge forms a great concave rest for your thumb as you shave, and here’s a little secret. Ergul used a dope displacement map to render that handle texture!


Dustin Low’s razor stands out as one of the most detaild looking razors of the lot. Overcomplicated, but in a good way, Low’s razor design explores a lot of things. Form, proportion, material, textures, transparency, and their ultimate effect on aesthetics. Low’s even created a pretty awesome looking timelapse of the modeling process in Autodesk Fusion 360!


Last, but definitely not the least, Dennis Johann Mueller’s razor concept lets this round-up article end on a complete high. Compact, and definitely a product you’d want to try to use at least once, Mueller’s razor ditches the handle for a thimble. The razor literally mounts on your fingertip, allowing you to shave in a way that feels a little more natural because you’re running your fingertip down your jaw, rather than maneuvering a handle. I imagine this is how the Black Panther shaves too. Mueller calls his concept the RZR, which is such a perfect name because it’s just as compact and compressed as the concept design itself!

A simple attachment turns your razor into a stubble-trimmer

People who want a clean shave need use a razor. People who want a stubble need to use an electric trimmer. Between those 1.5 millimeters of hair, you transition from a relatively inexpensive, handy product that does one job and does it well, to a clunky, battery-powered, electric trimming device that needs charging, and doesn’t come cheap. An electric trimmer doesn’t give you a clean shave, and a hand razor doesn’t let you maintain a stubble. Sounds incredibly counter-productive, right?

The idea behind the Stubl razor is so simple, it’s baffling that it isn’t mainstream yet. The disposable razor comes with an extra plastic stubble-shaver attachment. Use the razor without the attachment for a clean shave, or pop the attachment on and get yourself a neat, uniform stubble in minutes using the same tool, instead of gravitating towards an electric product that comes with wires, chargers, batteries, and a price tag. Since the attachment prevents the razor from coming in contact with your skin, you don’t need creams or foams or gels of any kind. Just run the razor along your jawline a few times to get the perfect 5 o’clock shadow. The Stubl packs four disposable blades and three stubble attachments that give you varying stubble-lengths. Take that, multi-billion-dollar male grooming industry!

Designer: Blake Squires

stubl_razor_1

stubl_razor_2

stubl_razor_3

stubl_razor_4

stubl_razor_5

stubl_razor_6

Gillette’s latest razor was built for allowing caretakers to shave the elderly

Gillette is synonymous with two things. A. Shaving, and B. Slick Masculinity. It’s difficult to find brands that have the kind of reach Gillette does, in the shaving industry. It quite literally has no serious competition, which one can only ask for as a brand, but its the latter reference that one could say is a narrow-sighted problem. Gillette has and does cater to women too, with its gentle Venus series that runs smoothly against the skin, removing unwanted body hair, but a major part of Gillette’s portfolio caters to the young man who believes beards are for hipsters, and wants to have an immaculately shaved jawline with no cuts or bruises, in record time. In maintaining that vision, Gillette forgot a significant part of their market. People who want to, but are unable to shave.

A masterpiece of inclusive design, the Treo enables assisted shaving, allowing helpers and caretakers shave the beards of men who are unable to. Using a straight-razor was out of the question, since these helpers/caretakers weren’t professionals, and using regular razors is challenging enough on your own face, so shaving someone else can be nothing short of an ergonomic nightmare.

Gillette began its work on the Treo as early as 2017, analyzing pain points, areas of failure, and coming up with solutions to the wide range of problems. Studying assisted shaving scenarios revealed that men were shaved sitting down, or in a bed, which meant that the angle on the blade and handle had to reflect that arrangement, rather than one where one shaves oneself. Since the subjects weren’t being shaved/groomed in the bathroom, there was also the challenge of shaving cream becoming a messy ordeal, given that you didn’t have a constant flow of water to periodically wash the razor. All this research culminated in the Treo, the world’s first assisted-shaving razor.

Designed with a reoriented blade angle, the Treo can be held like a brush or a pencil, making it easier to maneuver across a jawline than conventional razors. A special razor guard allows the blade to work all sorts of facial hair, thick or thin, resulting in a clean shave with lesser water. The handle of the Treo also doubles up as a tube of shaving gel, allowing the Treo to be practically a shaving kit in itself, and armed with enough gel to last for exactly one shave (so that the blade is disposed of when the gel is used up, ensuring a single blade isn’t used twice). The Treo uses a proprietary water-based gel too, which doesn’t create a mess like foam does, and doesn’t need washing off too. The water-based gel hydrates the skin too, working as an after-shave as well!

It’s great to see the company build a product keeping inclusivity in mind. The Treo not only helps caretakers groom and shave the people they take care of, it also allows the men being shaved to feel clean, comfortable, and even young again!

Designer: Gillette

gillette_treo_1

gillette_treo_2

gillette_treo_3

Lyft’s first electric scooters arrive in Denver

Lyft is making moves in the electric scooter market, as it is bringing the dockless devices to Denver, the first US city in which it will operate its scooter service. Lyft has permits to operate scooters and electric bikes in the Colorado city, and i...