Tag Archives: author_name|Billy Steele

Apple AirPods 4 review: Pro features for everyone

Posted on by

With a big redesign to the “regular” AirPods, Apple delivers two new models. Sure, they have a similar look, and share a few features, but the biggest change from the third-gen version is the addition of active noise cancellation (ANC) for an added cost. The AirPods 4 with ANC ($179) option has more to offer in terms of conveniences, but the overhaul has greatly benefitted the AirPods 4 ($129) too. Apple has given its entry-level AirPods extra power, while also offering an option between those and the most expensive earbuds in its arsenal. However, your AirPods choice may still come down to whether you prefer an open-wear design or a fully-closed fit.

A key difference between the AirPods 4 and Apple’s previous model of “regular” AirPods is the shape of the housing that goes into your ears. The company says it analyzed thousands of ear shapes and over 50 million data points generated by 3D modeling to refine the curves on this new set of buds. Specifically, Apple adjusted the edge of the lower counter and narrowed the overall width for a more secure and more comfortable fit for more people. The company also put the H2 chip in the stem, allowing for a more compact design and improving both airflow and acoustics.

The revised shape does indeed lead to a better fit for my ears. The AirPods 4 are more comfortable and stay in place better than their predecessor. I never once felt like they were going to fall out when I was moving around, unless I turned my head completely to the side to lay down. Open-fit earbuds typically don’t feel the most secure in my ears, but these do, and one less worry contributed to a better overall experience wearing them. Of course, the most secure fit remains with the AirPods Pro.

There’s a force sensor on the stem of the AirPods 4. On both models, you can use that to control music, take calls and summon Siri. Of course, hands-free access to Apple’s assistant is available on both models as well. And on the ANC set, you can long press on the stem to cycle through Noise Control modes (ANC and transparency).

What you won’t find here are onboard volume controls. On the AirPods Pro 2, you can slide your finger on the stem to adjust the level. That function is absent on the AirPods 4. Apple recommends you ask Siri to change the volume, use your iPhone’s buttons, drag the slider on the Lock Screen player or swipe over to the Control Center. There’s also the Digital Crown on the Apple Watch if you’re on the Now Playing screen. Honestly, it’s all a hassle. Siri is too slow and reaching for something that’s not my earbuds just makes me mad. But, that hassle was there on the AirPods 3, so at least Apple is consistent.

Looking at the earbuds themselves, you won’t be able to tell the difference between the two versions of the AirPods 4. You can, however, tell them apart by looking at their cases. The ANC model has a speaker in the case to further assist Find My with beeps, so there are visible holes beside the USB-C port. On both AirPods 4, the LED indicator light is now hidden, so you don’t see an extinguished dot when it’s not on. What’s more, Apple removed the back button for pairing and resetting the earbuds. Now, you’ll double tap near the LED to put the AirPods 4 in pairing mode. And you’ll double tap three times (six taps total) to trigger a reset.

Siri Interactions are enabled by the H2 chip.
Billy Steele for Engadget

The H2 chip from the AirPods Pro unlocks several notable advanced features on the AirPods 4. Sure, some of those are only available on the ANC model, but there are plenty of handy features on the $129 option. On that new entry-level set, you’ll get Personalized Spatial Audio with dynamic head tracking – immersive listening that’s tailored to your hearing. The sound features also include 48kHz, “cinema-quality” audio for FaceTime and Adaptive EQ. And for calls, Apple’s newly introduced Voice Isolation will offer some extra help when you’re taking calls in less than ideal settings.

The last key piece is Siri Interactions, which allow you to accept or reject calls, respond or dismiss messages and engage or dismiss notifications. All of those are done with a nod or a shake of the head, so you’re free to handle those tasks when you’d rather not speak or can’t reach your phone. And like everything else, you can disable them if you’d rather do things the old fashioned way.

The AirPods 4 with ANC supports all those and then some. For $179, you’ll also get Adaptive Audio, Conversation Awareness, wireless charging and transparency mode. Adaptive Audio comes in handy when you encounter temporary environmental noise, like a coffee grinder or running water, as the tool automatically adjusts sound settings to maintain the overall listening experience. Conversation Awareness lends a hand for quick chats so you don’t have to futz with the earbuds to participate. However, I still wish Apple would fully pause the audio rather than just lowering the volume. I find it distracting, and in some instances I felt I had to talk louder to project over sounds the other person couldn’t hear. (Apologies to my coffee shop barista if I was shouting while I thanked you.)

I’ll also note that transparency mode and ANC go hand in hand, so it’s not surprising that a feature to listen to ambient sound was omitted on the cheaper AirPods 4. And lastly, that case speaker on the ANC version will come in handy for Find My when you inevitably misplace the set. The ANC AirPods 4 case also only supports proximity view in Find My though, not the Precision Finding that AirPods Pro 2 offers.

Of course, there are a few more mainstays from the AirPods lineup that return here. Audio Sharing with someone else wearing Apple or Beats earbuds or headphones is a great feature, as is automatic switching between Apple devices when you get a call or start playing music from your MacBook Pro instead of your iPhone. Both of the AirPods 4 are rated IP54 for moderate dust, sweat and water resistance – just like the AirPods Pro 2. And like that pair, that protection goes for both the earbuds and the case.

Apple refined the shape on the AirPods 4 for a better fit.
Billy Steele for Engadget

Apple equipped the AirPods 4 with a newly designed low-distortion 11mm driver and high dynamic range amplifier. The driver is built with a new membrane mesh as well as a new magnet, and overall, it has higher excursion – or distance the cone can travel. Importantly, Apple is able to offer better acoustic performance by directing the driver straight into the ear rather than positioning it off to the side. By doing this, the company has eliminated sound reflections that impacted overall clarity.

The “richer bass, crisp highs and even more instrument separation” are all claims that hold true when compared to AirPods 3. There’s more low-end tone than the previous model right out of the gate, and the punchier treble opens the sound stage so it’s wider and more immersive. The improved frequency response is on full display with Dolby Atmos content (movies, music and TV), but the AirPods 4 are also more sonically adept with non-spatial tunes and video.

That promised instrument separation is apparent on Tycho’s synth-laden Infinite Health. Rather than seeming smashed together, the synths are all layered, reproducing the atmospheric soundscape the artist intended. Billy Strings’ Live Vol. 1 isn’t an Atmos album, but the AirPods 4 do an excellent job with the finer details of the live recordings. You get the reverb of the PA system, warmth of the upright bass and the subtle percussion in the bluegrass picking. The acoustic instruments stand on their own, with plenty of character studio tracks don’t offer. And for bass-heavy styles, like Kaytrana’s Timeless, the AirPods 4 have pleasant, thumping low-end that doesn’t overpower. Vocals still cut through the mix, as does the rest of the electronic/hip-hop instrumentation.

Audio performance is consistent on both sets of AirPods 4. Like I already mentioned, both are equipped with Personalized Spatial Audio with dynamic head tracking and Adaptive EQ. So, in terms of base sound performance, there are no sonic sacrifices between the two.

The revised shape of the AirPods 4 also assists with ANC performance on the $179 model.
Billy Steele for Engadget

Active noise cancellation on open-design earbuds is usually minimally effective. It’s very difficult for the technology to provide the kind of relief from distractions you likely crave when your ears aren’t sealed off with an ear tip. Apple isn’t the first company to try this, but I’d argue it is the first to offer a solution that actually makes a difference.

Apple employs the H2 chip and the same ultra-low-noise microphones from the AirPods Pro 2 to power the ANC setup on the AirPods 4. The primary goal is to reduce low-frequency noise, which means you’ll notice the most impact on things like airplane cabin hum, HVAC systems and city traffic. The company promises you’ll be able to listen to music and other media at lower volumes on the ANC model without distraction or sacrifices to audio quality, all thanks to this system.

It’s not the world-blocking magic that Sony’s WF-1000XM5 and other devices that seal off your ears offer, and it’s not nearly as good as the AirPods Pro 2 either. But, for earbuds with an open-wear design, the difference when ANC is enabled is actually noticeable. The AirPods 4 struggle with TV noise and human voices, but they do well with constant, low rumbling distractions. On similar models I’ve tested from other companies, active noise cancellation made little to no difference, and only served to drain the battery faster. If you’re looking for something close to silence, the AirPods 4 won’t give you that. However, the earbuds will deliver a noise reduction that will put a dent in raucous environments, and do so most effectively with low-frequency sounds.

AirPods are popular options for hands-free calls, so Apple has improved how you sound when taking voice and video calls. Voice Isolation is an H2-powered tool that Apple says “isolates and enhances your voice,” and is a new feature for the AirPods 4 and AirPods Pro 2. Essentially, it removes background noise to keep you sounding your best when you’re in loud environments.

With compatible AirPods, like the fourth-gen model, Voice Isolation is enabled by default for calls and FaceTime video, but you can turn it off in microphone settings on iOS, iPad and Mac. The feature also works with any third-party apps that use CallKit, like WebEx, Zoom, WhatsApp and more. Like the ANC, this is another impressive feat from Apple. Voice Isolation totally negates raucous fans, running water and other would-be distractions for the person on the other end. I did notice a very slight difference in overall voice quality, but it’s a fair trade-off for sounding like you’re in a silent room when you’re not.

The AirPods 4 with ANC also have transparency mode, which is helpful for calls. This noise control setting pipes in the most natural ambient sound of any earbuds, just like the AirPods Pro 2.

The AirPods 4 have a smaller case than the third-gen version.
Billy Steele for Engadget

Apple says you can expect five hours of battery life on both versions of the AirPods 4. With ANC active on the pricier model, you’ll get one hour less of play time. Both of the AirPods 4 offer five charges in the case, which brings total usable time to 30 hours. Apple explains that all of its stated battery figures are at 50 percent volume with Spatial Audio off. For the ANC version, the company says the estimates also include disabling Conversation Awareness.

50 percent volume won’t be loud enough for most people on iOS, so I conducted my tests at around 70 percent there. Around 50 percent is good enough on Mac, though. Using a combination of those two settings across the devices, and employing a mix of both ANC and transparency mode while playing spatial audio and regular content, I got four hours out of the noise-canceling AirPods 4 with no problem. I had no issues hitting the stated figure on the non-ANC version either.

As a reminder, only the ANC version supports wireless charging. While that case will work with Apple Watch chargers, it doesn’t support MagSafe accessories. If you find yourself in a pinch, both sets of AirPods 4 can offer an hour of use in five minutes.

Apple’s main competition for the AirPods 4 is the company’s other earbuds. The likes of Sony don’t offer the deep iOS and macOS integration, which is a key selling point for any AirPods. That being said, the AirPods Pro 2 is the only other consideration if you’re looking for another flavor of AirPods. The earbuds are two years old at this point, but the company is still adding new features. For example, AirPods Pro 2 is getting Voice Isolation and Siri Interaction today when iOS 18 drops. More importantly, Apple just got FDA approval for its Hearing Aid feature that will arrive alongside a Hearing Test tool this fall. Expanded Hearing Protection items are on the way as well.

Of course, you’ll get enhanced noise cancellation (with an ear tip seal) on AirPods Pro 2, and a transparency mode that handles your voice better. There’s also two more hours of battery life over the ANC AirPods 4, a MagSafe-compatible case, Find My Precision Finding and, crucially, on-board volume controls. The second-gen AirPods Pro are available for $190 right now, and we’ve seen them dip to $180 over the summer. If you can find them for the same price as the more expensive AirPods 4, you might want to go that route. I don’t expect Apple will have a replacement before September 2025, so you don’t have to worry about them becoming immediately obsolete if there’s another hardware event next month or early next year.

With the noise-canceling AirPods 4, Apple has bridged the gap between the entry level model and the AirPods Pro. The ANC version gets nearly all of what makes the AirPods Pro 2 so good, except for the most powerful noise cancellation, the upcoming hearing health features and a few other items. However, a $179 set of AirPods isn’t a great deal right now with the AirPods Pro 2 available for nearly the same price if you catch them on sale. The $129 AirPods 4 is a big improvement over the previous version though, and they’re a worthwhile update for fans of the basic, non-ANC formula. The question then becomes if you prefer the open design and can live without the Pro’s extras. Both versions of the AirPods 4 have their merits, but for once, price won’t be a deciding factor when choosing between two Apple products.

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/apple-airpods-4-review-pro-features-for-everyone-120032046.html?src=rss

Ultimate Ears Everboom review: A floatable outdoor speaker that packs a punch

Posted on by

Ultimate Ears has a history of building loud and rugged portable Bluetooth speakers with features to simplify the listening experience. Whether it's a party mode that supports over 100 speakers at once, or the ability to remotely power off the unit with your phone, the company’s devices have consistently been among the best. Enter the Everboom ($250), a new option from UE that sits in the middle of its lineup in terms of size and power. Those handy Ultimate Ears features return, but so does the company’s lack of clarity and fidelity.

The Everboom is slightly smaller than the midpoint of Ultimate Ears’ Bluetooth speaker lineup. The compact Wonderboom and cylindrical Boom 4 and Megaboom 4 are the smaller options, while the Epicboom and Hyperboom are larger. The Megaboom 4 is actually taller than the Everboom, but the latter is wider, making it bigger overall.

Aesthetically, the Everboom is most like the Epicboom: an oval-shaped, cylindrical device with a rubber base. Where the two differ, other than size, is that the Epicboom has an attached strap around back while the Everboom has a loop. You use the included carabiner or opt for a clip or hook. And, like all recent UE speakers, large “+” and “-” buttons are part of the look, putting the volume controls right on the face of the speaker. Up top, there are buttons for power, Bluetooth, Outdoor Boost and play/pause. That last control also skips tracks with a double (forward) or triple press (back).

Like most recent UE speakers, the Everboom is plenty rugged. The IP67-rated unit can survive being fully submerged, but you probably won’t have to worry about that because it also floats. While UE highlighted this aspect in the announcement, I should point out that the Wonderboom also floats. The company says it drop-tested the Everboom at heights up to one meter (about three feet), so the occasional stumble shouldn’t be an issue beyond scuffs or scratches.

The UE Boom app is where all of the settings of the Everboom are available.
Billy Steele for Engadget

In order to use the Everboom's advanced features, you’ll need to access them in the UE Boom app. Once the speaker is connected, the main interface displays battery status above controls for power, Outdoor Boost and a megaphone tool. There’s a volume slider too, as well as a media player and tabs for PartyUp and EQ. The megaphone allows you to make announcements via your phone’s mic and Partyup is Ultimate Ears’ nomenclature for pairing multiple speakers together. You can actually sync up to 150 units in the same setup, so long as they’re either Boom, Megaboom, Epicboom or Hyperboom models.

A dive into the detailed settings menu reveals even more handy tools. There’s the option to add playlists from either Amazon Music or Apple Music so you can start them directly from the Everboom’s play/pause button (long press). You can add as many playlists as you want and cycle through them without picking up your phone. When one collection is playing, you’ll also have access to playlists from the media player inside the app.

There are a few more items in the settings that I’ll point out. You can enable so-called Sticky PartyUp to keep speakers grouped if you change locations and you can also disable the ability for other people to add your device to their PartyUp arrangement. Bluetooth Standby is on by default, and it’s how the app can remotely turn the speaker on or off. But it impacts battery life, so the company gives you the option to extend play time by disabling it.

While the Everboom floats, other UE speakers can do the same.
Billy Steele for Engadget

One of the best things about the Everboom is that the driver arrangement beams sound 360 degrees. You can clearly hear music when you’re sitting on the side of the device, although the tuning there favors treble over bass. My main gripe with Ultimate Ears speakers is that it always seems like the company favors volume over fidelity. The speakers typically sound fine, and the Everboom is more of the same, but there’s a lack of overall depth and detail that other Bluetooth speakers muster.

Songs consistently sound compressed, noticeably lacking in the mid range, despite punchy highs and rumbling bass. There’s just a lack of overall clarity on bluegrass tunes from Nickel Creek and the open, atmospheric instrumentation on Phantogram’s “Come Alive.” Vocals always cut through clean, but the sound stage is confined to the two high and low extremes. Saosin’s Live From The Garden Amphitheater is one of the better-sounding live albums I can remember, but the Everboom subdues the energy of the show with a lack of dynamics in its tuning.

Of the EQ presets, Bass Boost is the only one that improves things, but not dramatically. Unlike most bass-heavy profiles, this one doesn’t further muddy the audio quality. However, for some genres, like the brooding alt-rock of Balance and Composure, the added low-end makes the constant, rhythmic bass lines overbearing.

In wide open spaces, Outdoor Boost can help improve the listening experience. According to the company, this increases the volume by one decibel (from 90dB to 91dB), and that’s it. However, if you happen to activate it indoors, you’ll be able to hear that the tuning also changes slightly. Outside though, all you’ll notice is slightly louder, better-projected sound. The feature makes an obvious difference when you’re no longer in a confined space, addressing a problem that typically plagues Bluetooth speakers when used outdoors.

No need to worry about the Everboom going for a swim.
Billy Steele for Engadget

The Everboom has enough juice to keep the tunes going for a good long while. Ultimate Ears promises up to 20 hours on a charge, more than enough for a full day’s worth of music. After my tests, I can confidently say that the speaker will outperform that, unless you’re running it at full volume for hours on end (you won’t, trust me). After 12 hours, the UE app was still showing 70 percent battery remaining. These trials were mostly conducted indoors where a volume around 40 percent is plenty loud. Also, I didn’t notice that the Bluetooth standby mode for turning the speaker on with the app had any impact on battery life like the company warns.

As I already mentioned, there are plenty of alternatives in the Ultimate Ears lineup if you’re looking for similar features in a slightly different package. However, my recommendation is the Marshall Middleton ($250), a selection from our best portable Bluetooth speakers list for a speaker at this price and size. Right now you can get it for the same cost as the Everboom and it has several handy features the UE speaker doesn’t offer.

First, there’s a joystick control knob up top, with a visual indicator for battery and volume levels. You can also make bass and treble adjustments on the device and there’s a 3.5mm jack for wired input. Of course, you get all of the stylings of the iconic Marshall guitar amps and a Stack Mode allows you to use multiple units as a more robust setup. The Middleton is rated IP67 for water-resistance and offers 20 hours of battery life. Both of those specs are the same as the Everboom.

Also, don’t sleep on the new Beats Pill ($150). Sure, it's a smaller speaker, but it still delivers a big sound. The bass performance can vary depending on the album or genre, but overall there’s nice low-end tone from the compact unit. What’s more, angled drivers project sound better than previous versions and you have the option of lossless tunes via wired USB-C connection. And perhaps best of all: you’ll save $100.

Ultimate Ears are typically a solid bet for the price, even though the best value lies with the company’s smaller speakers. The mid-sized Everboom brings the UE’s best features to yet another new design, maintaining its robust dust, moisture and drop protections. All of the conveniences are offset by a sound profile that’s deafeningly loud, but lacks the polish for detailed, immersive listening. For all of the punchy highs and deep bass, the overall sonic effect is murky and subdued in the absence of mids. Still, the fact that the speaker floats and the dedicated outdoor sound boost makes this a decent option for adventures. And one that will certainly annoy the people in the next campsite.

This article originally appeared on Engadget at https://www.engadget.com/audio/speakers/ultimate-ears-everboom-review-a-floatable-outdoor-speaker-that-packs-a-punch-161532961.html?src=rss

The key updates that make AirPods 4 block sound better — and just sound better

Posted on by

The headline feature of the AirPods 4 may be active noise cancellation (ANC), but Apple has done well to improve the overall audio quality in addition to blocking environmental sounds. For the first time on the "regular" AirPods ANC is on the spec sheet, at least for one model, and there are a few key components that allow the earbuds to effectively cancel noise. And that's despite the fact that your ears aren't completely sealed off with a flexible tip. There are also specific changes to the AirPods 4 that improve overall sound quality, a feat that's impressive in its own right for open design earbuds. 

When it comes to the ANC setup on AirPods 4, the combination of a refined earbud shape, the power of the H2 chip and upgraded microphones work in unison for useful noise cancellation. Apple isn't the first to offer ANC on open-type earbuds. I've reviewed dozens of sets of earbuds over the years, and after a few minutes with the AirPods 4, I would argue the company is the first to actually employ noise cancelling in a way that's actually helpful while not fully sealing off your ears. The ANC setup here obviously blocks noise, which isn't always the case with this type of buds. 

Apple has amassed a database of thousands of ear scans and 50 million data points, both of which contributed to the tapered design and reduced proportions of the AirPods 4. Those changes mean the earbuds fit better in more people's ears. A better fit means the ANC tech is less reliant on a complete seal to do its thing, but also it means that the earbuds should be more comfortable to wear. 

The updated microphones have both a lower noise floor and higher frequency bandwidth. This means that the system can detect a wider range of sounds that it may need to block out. Plus, there's advanced computational audio at work for the ANC here, powered by the H2 chip. This component also enables the features from AirPods Pro to be available on AirPods 4, from Voice Isolation to Siri Interactions and more. 

AirPods 4 have some seriously impressive ANC chops.
Billy Steele for Engadget

The addition of ANC arrives alongside transparency mode on the regular AirPods for the first time. I want to note that while I did observe less than ideal performance in a brief trial in the busy hands-on area after the event, the sound quality here should be just as natural as what's on the AirPods Pro. There could be a number of reasons why I couldn't hear my voice come through as clearly on this new model, including the fact that the demo room was wall-to-wall with journalists all raucously vying for the same limited real estate.  

Apple also sought to drastically improve the overall sound quality on the AirPods 4, and a key way it did so is really quite simple. Rather than having the driver pointed towards the side of your ear, the company repositioned it so that the audio is pointed directly into your ear canal. That change also reduced the number of audio reflections inside the AirPods housing, which allowed the company to enhance performance at higher frequencies. The result is increased overall clarity. There's also new acoustic architecture, a new low-distortion 11 millimeter driver and a new high dynamic range amp.

The result of all of those sonic changes on the AirPods 4 is an obvious boost in overall sound quality. After a brief listening session, I can vouch for the increased clarity the company described in its announcement, as well as a deeper, fuller effect on the audio. You'll notice a big difference between these and the third-gen AirPods, even if you don't spring for the ANC version. 

Catch up on all the news from Apple’s iPhone 16 event!

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/the-key-updates-that-make-airpods-4-block-sound-better--and-just-sound-better-160744010.html?src=rss

How Apple’s Hearing Aid and Hearing Test will work on AirPods Pro

Posted on by

The second-generation AirPods Pro have had hearing health features for a while now. However, those tools are being expanded in iOS 18 with Hearing Test, Hearing Aid and Hearing Protection that will soon be available on the earbuds. Apple's three-prong approach to hearing health now covers awareness, assistance and prevention, but it all starts with the "clinically validated" hearing test you can take on your own. 

Apple has created its version of the hearing test we all probably took as kids. The one where you sit in a booth and raise your hand when you hear a sound. The company offers an alternative to the booth, bulky equipment and trip to the doctor with AirPods Pro and the iPhone. In any quiet environment, the earbuds and the phone can now offer a similar test to what you'd get in a physician's office. Here's how it works. 

From the Settings menu on your iPhone, you'll tap into the AirPods Pro settings to find the Hearing Health section. First, the software will check to make sure the fit of your AirPods provides a good seal for the test and that your location is quiet enough for the tech to offer reliable results. Once Hearing Test begins, active noise cancellation (ANC) will be enabled and you'll tap your iPhone screen when you hear tones on both the left and right sides. Apple employed 150,000 real-world audiograms and millions of simulations to develop a test that's quick and easy. But most importantly, the company says, it created one that's accurate. 

Once the test is completed, you'll get immediate results on your phone, telling you the level of hearing loss (if any) in each ear. If you have minimal hearing loss but could maybe benefit from help in certain frequencies, the software will recommend some tweaks in the Media Assist settings for entertainment audio and calls. If you have mild to moderate hearing loss, Hearing Test may suggest you use the AirPods Pro Hearing Aid feature to improve every day life. 

AirPods Pro will soon be able to tell you if you have some degree of hearing loss.
Apple

I got a brief walkthrough of Hearing Test following the iPhone 16 event, and it seems to be as quick and easy as Apple describes. To be clear, I didn't actually take a real test, just a simulated version with fake results, but every step in the process was accounted for in my abbreviated session. All told, you should be able to complete Hearing Test in about five minutes. 

Hearing Test results will be stored in the Health app, allowing you to see changes over time. You can retake the test as often as you want, with access to hearing health articles and the ability to download results just a tap away. I should also note that Hearing Aid is designed for people with mild to moderate hearing loss. If Hearing Test determines that you have severe hearing loss, the software will recommend that you visit an audiologist for further guidance. 

Hearing Aid is a software-based solution that boosts certain frequencies so certain sounds are enhanced on AirPods Pro. It's a first of its kind submission to the FDA, and a tool that allows you to customize the amplification, balance and tone at any time in the settings. The feature should help people with mild to moderate hearing loss better hear conversations and environmental sounds, but also improve what they hear in music, videos and calls. 

Both Hearing Aid and Hearing Test should be available this fall, pending FDA approval, as part of an iOS 18 update. 

Catch up on all the news from Apple’s iPhone 16 event!

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/how-apples-hearing-aid-and-hearing-test-will-work-on-airpods-pro-154814439.html?src=rss

Apple AirPods 4 hands-on: Seriously impressive ANC performance

Posted on by

Two models of AirPods were largely expected at today's iPhone 16 event, one of which would add active noise cancellation (ANC) to the "regular" AirPods for the first time. There are other upgrades for the $179 version, but after a brief demo of the ANC setup on the AirPods 4, I wager the noise-blocking tools will be the key selling point for most people. 

Apple is using this version of the AirPods 4 to bridge the gap between the AirPods and the AirPods Pro. As such, this model has some features that were previously exclusive to the company's priciest buds. Those include Siri interactions that allow you to accept or reject calls with a head nod, Adaptive Audio, Voice Isolation and more — all thanks to the H2 chip that powers the Pro model. All of these will be welcome improvements for people who prefer the open fit of the AirPods 4, but the ANC is the most impressive addition in my book. 

I got a brief demo of the AirPods 4 with active noise cancellation in the chaotic hands-on area at Apple Park. Honestly, it's a perfect place to test ANC. Once I had the AirPods 4 in my ears and I got some music going, I activated noise cancelling to silence the room. And it nearly did. I was blown away by how effective the ANC is on these earbuds that don't completely seal off your ears. Most open-type designs with ANC barely put a dent in ambient distractions, but do affect battery life. Here, I might as well have been in a room on my own, and I was only aware of the environmental noise when transparency mode jolted me back to reality. 

AirPods 4 have a revised design for a better overall fit for more people.
Billy Steele for Engadget

Apple updated the design for the AirPods 4, calling them "the best-fitting AirPods ever." This refined shape, in addition to some software tricks and acoustic performance, helps boost passive noise isolation while keeping your ears open for that default audio mode. ANC is yet another place Apple is able to flex the muscle of the H2 chip, and the AirPods 4 performance in that regard is a testament to the component's abilities. 

I will note that transparency mode on the AirPods 4 didn't sound as natural as it does on the AirPods Pro. That's mostly due to the fact that I didn't feel like the earbuds were piping in as much of my own voice as that pricier model. In fact, I felt like it hardly did so at all. An Apple rep explained that the difference could be attributed to a number of factors, including the fact that my ears weren't completely closed off.

Catch up on all the news from Apple’s iPhone 16 event!

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/apple-airpods-4-hands-on-seriously-impressive-anc-performance-211526269.html?src=rss

Apple Watch Series 10 hands-on: Bigger, lighter and thinner than ever

Posted on by

If you were hoping for three new Apple Watches today, you might be disappointed. However, Apple did reveal the largest Apple Watch display ever on the Series 10 wearable. The device is also thinner, delivering the bigger-but-slimmer update the company loves to give new devices. It's lighter too, so all three of the design changes should make the wearable more comfy to... wear. And of course, the new display will be a key selling point for this updated model. 

That display is the standout update to me. The panel is said to be 40 percent brighter when viewed at an angles, which will make it so much easier to see Watch info at a glance. I tried on the Series 10 in the demo area here at Apple Park in both the 46mm and 42mm sizes. The larger of the two isn't that much of burden for me as I'm rocking a 45mm Series 7 on the daily. Still, the OLED display is a massive upgrade over what I'm used to, and it will offer better performance over recent Apple Watches too. I also got a look at that screen update feature, which lets you see time and other info even when the display is in ambient mode. 

Apple Watch Series 10
Billy Steele for Engadget

In addition to the new display, both it and the Apple Watch case have more rounded angles. Combine that with new finishes (hello, jet black!) and you've got the biggest update to Apple's wearable since the Series 4 in terms of design. There are also a host of new features we weren't able to test in the demo area, like the depth gauge and water temperature sensor, but we did get a brief look at the upcoming sleep apnea tool in Apple Health. 

Here, Apple Watch will monitor your sleep for breathing disturbances. Like other sleep metrics, you'll see data for the current month, path six months and previous year, so you'll be aware of any changes over time. Of course, the app will alert you if you might need to see a doctor, and it will offer all of the logged data for you to share when you do. Millions of people suffer from sleep apnea, so being able to detect the signs of the condition without time-consuming sleep testing will certainly be a welcome addition to Apple's suite of health-tracking tools with Watch Series 10. 

Sleep apnea on Apple Watch
Billy Steele for Engadget

The main aesthetic update to the Apple Watch Ultra 2 is a new black color option. And while there's isn't a ton to say there, I will note that it looks very nice. Plus, it provides some contrast for those people who didn't care for the lighter silver option that was available before now. 

Apple Watch Ultra 2
Billy Steele for Engadget

Catch up on all the news from Apple’s iPhone 16 event!

This article originally appeared on Engadget at https://www.engadget.com/wearables/apple-watch-series-10-hands-on-bigger-lighter-and-thinner-than-ever-190000233.html?src=rss

Miniroll is the smallest Ultimate Ears speaker, but it packs big sound

Posted on by

If the compact Wonderboom is just too big for you, Ultimate Ears' latest speaker will supplant that model as the smallest entry in the company's current lineup. The Miniroll is, as the name suggests, a diminutive version of the company's flat, circular Roll design. This new Bluetooth option weighs less than a pound and can tuck into tight pockets. Or, as UE was keen to show off in the marketing materials, the speaker can attach to nearly anything thanks to a built-in, flexible strap. 

Once again, Ultimate Ears retained the prominent volume buttons as a key design element. Power and play/pause buttons are on the left side, with that latter control also assisting with track skipping and activating PartyUp mode (with Auracast) for syncing with other Miniroll speakers. Along the bottom edge, there's a USB-C port for charging. Even though that component is fully exposed, the speaker is IP67 rated dust and waterproof, plus it's able to withstand drops of nearly four feet (1.2 meters). 

The latest UR speaker can attach to nearly anything thanks to a built-in strap.
Ultimate Ears

Don't let the smaller size fool you, the Miniroll still packs a punch. The speaker can manage up to 85.5dB of volume, which is impressive for a unit of this stature. That big sound is powered by one 45.6mm active driver and one 37.75mm x 65mm passive radiator. 

Ultimate Ears promises up to 12 hours of battery life on a charge, plenty of juice for an all-day party on the go. There's a sustainability element here, too. The fabric made of 100 percent post-consumer recycled polyester and the speaker contains at least 40 percent post-consumer recycled plastic parts.

The Miniroll is available now for $80 (€80/£70) in black, blue, grey and pink color options. At this price, the speaker is the most affordable in the current UE range — in addition to being the smallest. 

Update, September 9 2024, 5:35PM ET: This post was updated after UE clarified that the PartyUp feature on Miniroll only works with other Miniroll speakers. This is due to the fact that Miniroll is the only UE speaker that supports Auracast at this time. 

This article originally appeared on Engadget at https://www.engadget.com/audio/speakers/miniroll-is-the-smallest-ultimate-ears-speaker-but-it-packs-big-sound-070144756.html?src=rss

Sony’s MDR-M1 studio headphones offer an audio and comfort upgrade over the MDR-7506

Posted on by

Sony's MDR-7506 headphones have become a go-to option for recording studios and creators. The set of cans are only $100 and they offer crisp, clean sound so you know exactly what your audience is going to hear. Today, the company announced a more robust option for studio headphones, the MDR-M1, that has a slightly updated design, new drivers, wider frequency range and improved bass response. 

Inside, the MDR-M1 packs newly developed drivers capable of frequency response of 5Hz – 80kHz. Sony explains that this ultra-wide range is crucial for things like subtle details in various recorded sound sources (Dolby Atmos and 360 Reality Audio especially). More specifically, the drivers here have a soft edge for those super low frequencies and a hard dome shape for accurate reproduction in the ultra-high range. There's also a "tuned port" on the outside of the ear cups, or Beat Response Control as Sony calls it, that provides the ventilation needed for improved low frequency control. That component works in tandem with an optimized diaphragm for "very tight bass response," according to the company. 

"In recording sessions, it is important to care what musicians or singers are listening to when they play or sing," explained Akihiro Nishimura, an engineer at Power Station at Berklee NYC who worked with Sony to develop these headphones. "MDR-M1 gives you the same impression of listening in a control room headphone, which makes it easier to create music by listening to each other."

Sony's latest studio headphones offer a big upgrade over the popular MDR-7506.
Sony

These are closed-back headphones, so you won't have to worry about sound leakage or ambient noise creeping in. Sony enhanced the replaceable ear pads for both increased comfort and better noise isolation. It also reduced the overall weight compared to the 7506, which means longer recording sessions shouldn't be as much of a burden. The MDR-M1 will come with two detachable cables with machined aluminum connections, one that has a stereo mini-plug and plug adapter (stereo mini to stereo standard) and the other a shorter option for connecting to various professional gear. Sony also took care to make the MDR-M1 more durable, as they're like to get dropped or flung around a studio or other recording and editing environments. 

The MDR-M1 is available for preorder now for $250, a significant increase over the MDR-7506. If open-back headphones are more your thing for recording and editing, the MDR-MV1 carries a similar spec sheet to this new model. But, the price tag is even higher at $400. 

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/sonys-mdr-m1-studio-headphones-offer-an-audio-and-comfort-upgrade-over-the-mdr-7506-150052628.html?src=rss

Beats Powerbeats Pro 2 earbuds are coming in 2025

Posted on by

If the over-the-ear hook design of the Powerbeats Pro is something you fancy, Beats is planning a successor for next year. The company teased the new product on Instagram, with footage of Los Angeles Dodgers' Shohei Ohtani taking batting practice with the upcoming earbuds. While there aren't any detailed specs or features mentioned in the brief clip, we do get a preview of the updated design. 

The Powerbeats Pro were a great set of earbuds when they arrived in 2019, offering stellar audio quality and the power of Apple H1 chip for convenient features. Earbuds have come a long way in the last five years though, and if Beats was going to keep this model around, it was in dire need of an update. From the looks of the video, the company has developed a smaller set of the sport-friendly buds, with a thinner hook that should be more comfortable to wear. It also appears that the company reduced the size of the casing that sits just outside of your ear. 

And that's about all we know that this point. The Powerbeats Pro 2 is coming in 2025 and Beats will likely be keen to who them off on athlete's ears between now and the time they're available for purchase. 

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/beats-powerbeats-pro-2-earbuds-are-coming-in-2025-151902492.html?src=rss

Noble Audio pairs dynamic and planar magnetic drivers in its first headphones

Posted on by

The last time we checked in on Noble Audio, the company had developed a set of wireless earbuds with xMEMS drivers inside. Now, the company is back with its first set of wireless headphones, and it created a unique driver arrangement for this product too. The FoKus Apollo is the first set of cans to offer a hybrid speaker setup that pairs a 40mm dynamic driver alongside a 14.5mm planar magnetic driver, according to the company. The duo should offer "top-end clarity of planar with the power and body achieved by dynamic drivers," thanks to the inherent sonic capabilities of each. 

Planar magnetic drivers provide improved accuracy through better treble and mid-range performance over dynamic drivers. However, dynamic drivers have the power to move lots of air for booming bass. Noble argues putting the two of them together creates "stunningly blissful" sound that no other headphones can generate. This model supports both LDAC and aptX HD for high-quality audio over Bluetooth. 

Of course, audio quality is only part of the equation with wireless headphones, and the FoKus Apollo's spec sheet looks solid. Noble promises up to 60 hours of battery life with active noise cancellation (ANC) on, with an additional 20 hours of use if you turn it off. Multipoint Bluetooth connectivity and transparency mode are available, and you can customize the EQ via an app. The ANC setup is powered by an ADI chip and a collection of six microphones. Noble says this arrangement is enough to cancel out 35dB of environmental noise.  

Noble didn't cut corners on design either. The FoKus Apollo is built with an anodized aluminum frame, and the Alcantara headband and replaceable protein leather earpads complete the look. In addition the built-in mic for calls, the company also offers the option to use a removable boom mic and there's a 3.5mm audio jack for wired use. 

Noble's gear doesn't usually come cheap, and that's the case with the FoKus Apollo too. The headphones are $649 (£599/€699) and shipments are scheduled to begin this month. 

This article originally appeared on Engadget at https://www.engadget.com/audio/headphones/noble-audio-pairs-dynamic-and-planar-magnetic-drivers-in-its-first-headphones-133330144.html?src=rss