Quake is now Steam Deck Verified

Bethesda announced on X today that Quake is now a Steam Deck Verified title. The 1996 game from the legendary id Software has also been designated Handheld Optimized for the Xbox ROG Ally devices. As one of the OG boomer shooters, Quake still commands a sizable and passionate fan base, and it's now available on just about every gaming platform imaginable. 

Since rolling out its verification program, several thousands of games have been designated as supported for the Steam Deck. Valve has more recently been preparing to have additional gaming devices run its SteamOS platform. Even though Xbox ROG Ally is the only one now, there's already a special extension of verification to note if a title is more broadly compatible with Steam's operating system. And don't forget that Valve's anticipated Steam Machine is due out some time early this year, so it wouldn't be surprising to have those verification checkmarks start to carry more weight in 2026.

This article originally appeared on Engadget at https://www.engadget.com/gaming/quake-is-now-steam-deck-verified-223009852.html?src=rss

CES 2026: Hyperkin and Gamesir made a modular game controller for your smartphone, tablet and even your Switch

I’ve been using the same smartphone controller on my iPhone for years. That’s partly because most options are so similar. Announced at CES 2026, the X5 Alteron couldn’t be more different. It’s a collaboration between GameSir (which loves unusual peripheral dalliances) and Hyperkin (retro-leaning controller maker).

The X5 Alteron is apparently the world's first fully modular mobile games controller. While the headline feature might be the stick/d-pad/button modules, the X5 Alteron has a very accommodating vice grip that works with devices from iPhone and Android phones through to the Switch series and even iPads. There’s even Bluetooth if you want to use it with a PC. 

Hyperkin x Gamesir X5 Alteron hands-on at CES 2026
Mat Smith for Engadget

On the showfloor, Gamesir had a non-working prototype model with swappable modules, able to replicate most of your favorite layouts, including asymmetric analogue sticks, a yellow stick that’s aspiring to be a Gamecube controller and even a six-button array for those wanting to scratch that Sega Saturn itch. And if you want symmetrical sticks, you maniac, you can have that too. Rumble motors will also be built into the controller.

The modules lie flush when magnetically attached to the controller, although on the early prototype, they were difficult to remove. It’s pretty much fully customizable: there will be adjustable stick heights and hot-swappable buttons. Hyperkin and Gamesir are promising GameCube and N64 modules, and even a trackpad module for FPS games.

There’s contemporary technology too. The X5 Alteron will have capacitive sticks, not Hall-Effect ones. This should offer much more precision: the technology remains pretty rare in controllers. There are Hall-Effect analog triggers on the rear of the controller. It’s early days, with no release date or pricing set yet, but I'm intrigued — and I suspect many mobile gamers are too.

This article originally appeared on Engadget at https://www.engadget.com/gaming/hyperkin-and-gamesir-x5-alteron-modular-game-controller-ces-2026-221853624.html?src=rss

Intel’s Core Ultra Series 3 let me play ‘Battlefield 6’ at 190 fps on a Lenovo ultraportable

How far has Intel's embedded Arc graphics come over the years? Enough to let me play Battlefield 6 at up to 190 fps in 1080p, with the graphics settings set to high, all on an unassuming Lenovo IdeaPad Pro 5. There was no need for dedicated graphics, just the Intel Core Ultra X9 388H's built-in Arc B390 GPU.

There's a catch, of course: Intel's XeSS3 AI upscaling and 4X frame generation is the big reason why I was able to see such high fps figures. I was playing Battlefield 6 on a controller, with the Lenovo laptop connected to a TV, and I was surprised by how smooth the gameplay felt. There wasn't any sense of lag like I've seen in earlier frame-gen implementations, though any lag would probably be more noticeable if I was playing with a high DPI gaming mouse.

Environmental details, shadows, lighting and particle effects also looked flawless. If I was sitting on a couch, I’d think the game was being powered by a console or a budget gaming PC. I didn’t get a chance to push the resolution up to 1440p, but it’d be interesting to see if it could maintain at least 100 fps in that mode.

Intel Core Ultra 3 gaming on a Lenovo IdeaPad Pro 5.
Playing "Battlefield 6" with a Lenovo IdeaPad Pro 5, powered by Intel's Core Ultra 3 chip.
Devindra Hardawar for Engadget

Not all of Intel's Core Ultra 3 chips will achieve such lofty gaming heights, unfortunately. Only the X7 and X9 chips include 12 Xe GPU cores and Arc B390 graphics. The rest of the Core Ultra 3 family has the typical four Xe cores and basic Intel graphics.

Intel claims the B390 is around 80 percent faster than the Radeon 890M, which is built into the Ryzen HX370. Additionally, the company says the new GPU is 76 percent faster than its Arc 140T, and overall it should offer similar performance to the mobile RTX 4050 GPU.

A Lenovo IdeaPad Pro 5.
A Lenovo IdeaPad Pro 5.
Devindra Hardawar for Engadget

This article originally appeared on Engadget at https://www.engadget.com/gaming/intels-core-ultra-series-3-let-me-play-battlefield-6-at-190-fps-on-a-lenovo-ultraportable-220952246.html?src=rss

Dreame’s latest robot vacuum concept has slightly terrifying legs that can climb full-size stairs

Robot vacuum companies are once again out in full force at CES 2026, giving their devices a new set of intriguing — and sometimes unsettling — capabilities. This year, Chinese appliance maker Dreame is showing off a vacuum prototype with giant legs that can climb up and down an entire flight of stairs.

The concept, called the Cyber X, was previewed last year at IFA in Berlin. The vacuum sports a somewhat terrifying set of legs with rubber treads that allow it to autonomously navigate multi-story environments. While Dreame has previously shown off vacuums that can move up smaller steps, it says the Cyber X can climb stairs up to 25cm (9.8 inches) high and slopes up to 42 degrees. It can manage both straight and curved staircases, and can climb a flight of steps in 27 seconds, according to the company.

We got a chance to see the Cyber X and its stair-climbing abilities at Dreame’s CES booth, and the device was able to deftly crawl up and down a flight of stairs. The Cyber X didn’t use its “legs” to walk up the steps, though. Instead, it used the treads horizontally, moving a bit like a miniature, cleaning tank.

Interestingly, the actual vacuum is separate from the climbing apparatus. As you can see in the image below, the larger device with legs has an opening where the actual robot vacuum can dock inside and sit while the Cyber X climbs stairs.

That likely means the Cyber X isn’t able to clean the stairs themselves, though it does cleverly solve the problem of transporting the vacuum throughout multi-story environments.

In addition to its legs, the Cyber X’s vacuum also has a built-in water tank to support mopping abilities, and a laser-powered navigation system to help it maneuver up stairs and around other obstacles. It also has a braking system that allows it to stay stable on floors and stairs, even if the battery dies.

Dreame's Cyber X.
Dreame's Cyber X.
Karissa Bell for Engadget

For now, Dreame says Cyber X is just a research prototype and hasn't indicated if it plans to make it, or a robo vac like it, more widely available at some point in the future. But Dreame has a history of showing off innovative features at CES ahead of an actual release. Last year, the company had a prototype vacuum with a mechanical arm at its CES booth. This year, it announced a new vacuum with very similar abilities

The company also announced the Dreame X60 Max Ultra, its latest flagship robot vacuum that can roll up smaller steps. The X60 Max Ultra, which costs $1,699, can move over stairs up to 8.8cm (about 3.4 inches), a small improvement over last year's X50, which could clear heights of 6cm (about 2.4 inches). That's not enough to manage a full-size stair, which is typically around 7 inches, but it should make the X60 flexible enough to navigate threshold steps and other small obstacles.

Update, January 6, 2026, 5:07PM PT: This post was updated with new photos and video and to add additional information about the Cyber X after seeing a live demonstration at Dreame’s CES booth.

This article originally appeared on Engadget at https://www.engadget.com/home/dreames-latest-robot-vacuum-concept-has-slightly-terrifying-legs-that-can-climb-full-size-stairs-210000399.html?src=rss

Dreame’s robot vacuum with an arm is back at CES 2026 and it can do more than pick up shoes

Last year at CES, Dreame showed off a robot vacuum prototype with a mechanical arm. But while we were able to see the arm extend and retract, we didn’t see the device, which was described as a prototype at the time, actually grab anything, which was a bit disappointing.

This year, though, the company has made its arm-enabled vacuum a reality with the Cyber 10 Ultra. Dreame previewed it recently at IFA in Berlin, but has now confirmed it will be on sale later this year. 

The vacuum has an extendable arm that looks pretty similar to the prototype version we saw last year. It extends from the top of the vacuum and has a claw-like device at the end for scooping up objects. According to Dreame, it can pick up items that weigh up to 500 grams (about 1 pound) so it should be able to grab a wider variety of stuff than the Roborock vac we saw last year, which had a 300-gram weight limit for its arm. 

The arm can also do more than pick up stuff from the floor. It supports its own cleaning accessories, and can grab vacuum nozzles and brush attachments from its base station. This allows the arm to act as an extension of the vacuum itself so it can be used similarly to how you might use hose attachments to reach hard-to-get areas with a traditional vacuum. 

We were able to see a brief demo of the Cyber 10 arm in action on the CES show floor. It was able to pick up balls and place them in a basket. Unfortunately, we didn’t get to see it lift any heavier object or grab its cleaning attachments, but we were able to get a good look at the base station and the small cubbies where they will be stored.

The base station that holds the attachments for the vacuum's arm.
The base station that holds the attachments for the vacuum's arm.
Karissa Bell for Engadget

And, like Dreame's other robot vacuums, the Cyber 10 Ultra also has mopping abilities and can climb up small steps up to 6cm (about 2.4 inches). That's not quite as impressive as the tank-like stair-climbing Cyber X prototype it also brought to CES, but should help the Cyber 10 reach a few extra places in the house. 

The company hasn't announced an exact release date, but says it's targeting August of this year and currently expects the Cyber 10 Ultra to cost around €1799 (about $2,100).

Update, January 6, 2026, 4:17PM PT: This story was updated with new photos, a video and information about the Cyber 10 Ultra.

This article originally appeared on Engadget at https://www.engadget.com/home/smart-home/dreames-robot-vacuum-with-an-arm-is-back-at-ces-2026-and-it-can-do-more-than-pick-up-shoes-210000020.html?src=rss

Google’s Pixel Buds Pro 2 earbuds are on sale for $165

It's hard to find better wireless earbuds than Google's Pixel Buds Pro 2 if you're an Android user. The statement is even more true if you have a Pixel phone. If you're on the market for a new pair, you can grab the Pixel Buds Pro 2 for $165 in the hazel colorway, which is $54 off their usual price. Other color options are also discounted, just not as steeply. 

The device made our list of the best wireless earbuds, and this is particularly true for those tied into the Pixel ecosystem. These earbuds are on the smaller side and, more importantly, comfortable to wear for long periods of time. They also manage to deliver pristine audio, as we were fans of the punchy bass, full mids and crisp highs on offer.

The battery lasts for 30 hours when you include return trips to the charging case, at around eight hours a pop. They offer multipoint Bluetooth that switches between audio sources with just a single button press. There's an app for keeping an eye on battery levels and ANC levels.

The primary downside when these were first released was the high price tag, which has been alleviated by this sale. Beyond that, there's really just one nitpick. Smaller earbuds translate to a smaller touch panel, which requires precision to operate.

Follow @EngadgetDeals on X for the latest tech deals and buying advice.

This article originally appeared on Engadget at https://www.engadget.com/deals/googles-pixel-buds-pro-2-earbuds-are-on-sale-for-165-193444985.html?src=rss

Amazon Luna’s January lineup includes Madden NFL 26 for free

Amazon has announced the next collection games that will be available to play through its Luna game streaming service in January. The highlight of the bunch is EA SPORTS Madden NFL 26, which will be available for a limited time on the service, but as in the past, Amazon is also giving away free PC games too if you'd prefer not to stream.

Madden NFL 26 will be available to Prime members everywhere Luna currently streams, from January 10 through February 10. Luna is also getting several new "GameNight" games — Amazon's name for streaming games you can play with a smartphone — including multiplayer physics-based building game Tricky Towers on January 8, and the party game collection The Jackbox Party Pack 3 on January 23. If you're looking for something a little more narrative-driven, Alan Wake Remastered and Death Stranding Director's Cut are also available to stream right now.

As part of the Prime benefits Amazon offers to subscribers, there's also some new PC games you can redeem for free. The best option this month is turn-based strategy game Sid Meier's Civilization VI, which is worth a revisit after the dramatic mechanical overhaul Sid Meier's Civilization VII introduced last year. Here's a complete list of games Amazon will offer over the course of the month, and which PC game store you'll be able to download them from:

  • Sid Meier’s Civilization VI (Epic Games Store)

  • Brigador: Up-Armored Edition (GOG) 

  • Reflections of Life: Dark Architect Collector's Edition (Amazon Games App)

  • Gunslugs: Rogue Tactics (GOG)

  • DeathKeep (GOG)

  • Harold Halibut (GOG)

  • D&D Stronghold: Kingdom Simulator (GOG)

  • Al-Qadim: The Genie's Curse (GOG)

  • Technotopia (Amazon Games App)

  • ELDERBORN (GOG)

This article originally appeared on Engadget at https://www.engadget.com/gaming/amazon-lunas-january-lineup-includes-madden-nfl-26-for-free-192500032.html?src=rss

Cosori’s stainless steel air fryer wants to assuage your fear of microplastics

Home appliance company Cosori has released a stainless steel air fryer because why not. The Iconic Air Fryer debuted in all its shiny glory at Pepcom this week, a media showcase event ahead of CES.

Cosori says the air fryer is meant to address a pain point in the market regarding consumer concern over heating food in plastic air fryers. The company's answer to this is a 6.5-quart stainless steel fryer with a ceramic, nonstick coating on all surfaces that come in contact with food. Iconic has a brushed metal finish that Cosori says is corrosion resistant.

The controls and display for the fryer are seated under tempered glass atop the motor. From there, users can select from six different cooking functions consisting of air fry, roast, bake, dehydrate, proof and reheat. The fryer can run as cool as 90 degrees Fahrenheit or as hot as 450.

Users can connect Iconic with the VeSync app, the parent company's app for bluetooth-enabled devices across its brand portfolio. From there, Iconic can be remotely monitored and controlled. The app also contains a library of recipes that can automatically apply the associated cook settings to the air fryer. Iconic is also compatible with Amazon Alexa and Google Assistant.

Iconic is available now from the Cosori website and retails for $250. Cosori also makes a more affordable 6-quart fryer that is currently our runner up for best overall air fryer.

This article originally appeared on Engadget at https://www.engadget.com/home/smart-home/cosoris-stainless-steel-air-fryer-wants-to-assuage-your-fear-of-microplastics-191339820.html?src=rss

Riot Games’ 2XKO will hit consoles on January 20

Riot Games has a pretty long legacy as a PC gaming studio, but the company is spreading out into consoles with its newest title. 2XKO will land on consoles on January 20, to coincide with the start of its first season. The game will be available globally for the PlayStation 5 and Xbox Series X/S with cross-play support, allowing current players to access their existing progress on a PC account.  

The formula for most recent Riot projects (with the notable exception of Valorant), has been to take the extensive character roster from its long-standing League of Legends MOBA and place them into other game genres. 2XKO is the company's foray into a 2v2 fighting game. Ten familiar LoL champions were on the debut linup when it launched in early access on October 7.

This article originally appeared on Engadget at https://www.engadget.com/gaming/riot-games-2xko-will-hit-consoles-on-january-20-185627826.html?src=rss

The PC version of 007 First Light requires lots of expensive RAM and VRAM to run at recommended settings

IO Interactive just revealed minimum and recommended specs for the PC build of 007 First Light. The company recommends 32GB of RAM and 12GB of VRAM. In a normal world, this wouldn't be news, as modern NVIDIA GPUs certainly have more than enough VRAM. However, we live in a world where AI companies gobble up lots of memory.

This has caused newer cards to tick up in price, with more hikes to come. Older cards like the RTX 3070 just won't cut it, as that one ships with 8GB of VRAM. Standard RAM is also getting much more expensive, putting that 32GB out of reach for many gamers. In other words, playing the James Bond sim at max settings will likely cost a pretty Moneypenny.

Specs.
IO Interactive

IO also recommends an Intel Core i5 13500 or an AMD Ryzen 5 7600 CPU, along with 80GB of storage space. Rumors have been swirling that NVIDIA is set to relaunch the RTX 3060 from 2021 to help offset increased demand caused by the hungry hippo that is AI. That one does ship with enough VRAM to run the game at recommended settings.

However, mostly everyone will be able to play the game at minimum settings. It requires just an NVIDIA GTX 1660 or AMD RX 5700 and an Intel Core i5 9500K or AMD Ryzen 5 3500. Players must have 16GB of traditional RAM and 8GB of VRAM.

It's worth noting that both the recommended and minimum specs are for running the game in 1080p. The company hasn't announced anything for 4K settings, so it must be pretty bad on the VRAM front.

IO has also revealed a partnership with NVIDIA on the game. 007 First Light will include DLSS 3 with Multi Frame Generation for "an even deeper sense of immersion and improved performance."

007 First Light is a nifty-looking action title that chronicles the early years of everyone's favorite lothario spy. Patrick Gibson from The OA and Dexter: Original Sin plays Bond and Lenny Kravitz, the guy who sings stuff, voices the villain. The game will be available on May 27 on multiple platforms.

This article originally appeared on Engadget at https://www.engadget.com/gaming/pc/the-pc-version-of-007-first-light-requires-lots-of-expensive-ram-and-vram-to-run-at-recommended-settings-184339040.html?src=rss