Anbernic RG DDS brings 3DS-inspired design and Snapdragon power to dual-screen gaming

Following the success of RG DS and the more recent RG DS Plus, Anbernic is taking its dual-screen handheld lineup in a more powerful direction with the new RG DDS (Dream Dual-Screen). The clamshell console draws inspiration from the Nintendo New 3DS, combining its familiar design with modern hardware, higher-resolution displays, and a few practical additions aimed at retro gaming enthusiasts.

The RG DDS features two custom IPS displays: a 4.7-inch top screen and a 4-inch bottom screen. The upper panel offers a 1200 × 720 resolution in a 5:3 aspect ratio, while the lower display uses 960 × 720 in a 4:3 aspect ratio. Both deliver a pixel density of 300 PPI and peak brightness of 500 nits. More importantly, their resolutions allow Nintendo 3DS games to run at 3× integer scaling, potentially delivering sharper visuals while preserving the original games’ proportions.

Designer: Anbernic

Under the hood, the handheld uses Qualcomm’s Snapdragon G2 Gen 2 processor, an octa-core chipset also found in the Retroid Pocket G2. Paired with an Adreno A22 GPU, which is comparable to the Adreno 735, it gives the RG DDS considerably more processing power than Anbernic’s earlier dual-screen models. The hardware should make it better suited to demanding 3DS emulation, although real-world performance will depend on individual games and software optimisation. Anbernic has not confirmed the final RAM configuration, but footage of the interface suggests that the device could offer at least 8GB.

The design stays close to the New Nintendo 3DS, including its rounded clamshell body, familiar button arrangement, and front-facing speaker grilles. However, the RG DDS replaces the original system’s small C-stick with a full-sized right analogue stick and includes two recessed thumbsticks for broader game compatibility. It also comes in black, blue, and white, with the colour options adding the nostalgia of Nintendo’s older handhelds.

An integrated, retractable stylus sits alongside the touchscreen, making it easier to interact with menus, maps, and inventory screens without relying entirely on physical controls. Unlike the earlier RG DS Plus stylus, the redesigned accessory extends after removal and features a mesh tip. Other additions include front-firing stereo speakers, a new Z-axis linear vibration motor, active cooling, and a 6,000mAh battery. The device also has a dedicated AI button, although its intended functions have not been clearly explained.

The two-screen arrangement is central to the RG DDS handheld’s appeal. Rather than squeezing both displays into one screen or repeatedly switching between them, players can keep a game’s main action and secondary interface visible simultaneously. This makes the device highly relevant for Nintendo DS and 3DS libraries, where touchscreen interaction and separate menus are integral to the experience.

Anbernic has not yet announced the RG DDS’s price or release date, but I’m eager to check out its real-world performance. The combination of modern processing power, higher-resolution displays, and a familiar handheld design makes it a lucrative alternative to dual-screen competitors such as the Retroid Pocket Duo and AYN Thor. Whether it delivers better value will ultimately depend on its retail price, software support, and performance in actual gameplay.

The post Anbernic RG DDS brings 3DS-inspired design and Snapdragon power to dual-screen gaming first appeared on Yanko Design.

Samsung’s Galaxy Z Fold 9 Leaks Reveal an Impossible 3.9mm Design

Samsung’s Galaxy Z Fold 9 Leaks Reveal an Impossible 3.9mm Design Samsung Galaxy Z Fold 9

Samsung is reportedly developing the Galaxy Z Fold 9, a device poised to set a new standard in foldable phone design. With a rumored thickness of just 3.9 mm when unfolded and 7.9 mm when folded, this device could become the thinnest foldable phone ever created. Such a design would not only push the boundaries […]

The post Samsung’s Galaxy Z Fold 9 Leaks Reveal an Impossible 3.9mm Design appeared first on Geeky Gadgets.

Posted in Uncategorized

GMKtec EVO X5 Pro Packs 160GB of VRAM and a 5.2 GHz CPU

GMKtec EVO X5 Pro Packs 160GB of VRAM and a 5.2 GHz CPU The GMKtec EVO X5 Pro mini PC standing vertically on a desk.

The GMKtec EVO X5 Pro, featuring the AMD Ryzen AI Max Plus 495 APU, combines high-performance hardware with a compact form factor. With 16 cores, 32 threads and a clock speed of up to 5.2 GHz, it is designed to handle demanding tasks such as AI model training and data processing. One notable specification, as […]

The post GMKtec EVO X5 Pro Packs 160GB of VRAM and a 5.2 GHz CPU appeared first on Geeky Gadgets.

Posted in Uncategorized

How Iron Man’s arc reactor works, explained part by part

Robert Downey Jr. returns to the MCU on December 18 in Avengers: Doomsday, but this time he plays Doctor Doom instead of Tony Stark. Marvel fans have opinions about that, and they are loud. Before Doom takes over the conversation, it seems like a good moment to revisit the object that launched the whole franchise. That object was a glowing ring in Stark’s chest, built from scrap, powering a suit and keeping shrapnel away from his heart. Eighteen years after Iron Man opened in 2008, it is still arguably the best prop Marvel ever made, fight me.

A YouTube creator named Dianax gave that prop the autopsy it deserves. Their video is a full 3D animated teardown of the Mark 1 reactor, with every piece modeled by hand and zero AI involved. You see the palladium ring, the deuterium feed, a tiny cyclotron, and ten magnetic coils working together to hold a plasma arc in place. Then comes the fun part, which is the physics. Spoiler: a real one would need a building-sized tokamak and a very large water bill, but the fantasy holds together better than you would expect.

Designer: Dianax

How the Mark 1 reactor works, layer by layer

Dianax’s teardown starts at the center, where a ring of pure palladium sits inside the fusion chamber. Deuterium gas gets fed in and the palladium soaks it up like a sponge, priming the fuel for ignition. A miniature cyclotron, basically a pocket particle accelerator, then fires particles at extreme speed into the middle of the chamber. The gas ionizes instantly, plasma ignites, and fusion begins, releasing energy equal to roughly 1,500 pounds (680 kg) of TNT every second. That lines up with the film’s 3 gigawatts, since Stark tells Yinsen the output is three gigajoules per second. Plenty of power for a suit, a city, or a very ambitious toaster.

Magnetic containment rings run along the chamber to pin the plasma in the center, ten coils on top wrap everything in a field, and an energy converter underneath turns raw plasma into electricity with zero loss. A cooling system vents the heat out the bottom while a rugged shell locks it all together. That stacked layout gives the design a clear logic, since fuel, ignition, containment, conversion, and cooling each get their own tier. A licensed replica referencing Stan Winston Studios’ work measures about 4.5 inches (11.4 cm) across in machined aluminum and stainless steel. Rebuilding it all by hand in 3D suits a design made to be understood at a glance.

Palladium, cold fusion, and the poison in Tony’s chest

On March 23, 1989, electrochemists Martin Fleischmann and Stanley Pons told a Utah press conference they had achieved tabletop fusion using a palladium electrode, heavy water, and electricity. Palladium has been known since the 19th century to store hydrogen inside its metal lattice, which made the pitch sound plausible. Labs around the world then failed to replicate the excess heat, and by late 1989 most scientists considered cold fusion dead. Stark’s cave reactor reads like cold fusion’s redemption arc, finally working because a billionaire genius said so. Whether the filmmakers meant the nod or not, the echo is hard to ignore.

In Iron Man 2, Tony learns the palladium core is slowly poisoning him, and the damage speeds up every time he suits up. I love that the poisoning gives a glowing gadget a real cost. His fix is a new element, synthesized from a theory his father Howard left behind, which replaces the palladium core with something clean and safe. In the comics, the suit that kept Tony’s heart safe in Tales of Suspense #39 wasn’t embedded in his chest, which makes the glowing chest ring a much later idea. Back in the first film, Pepper Potts gives him the original reactor mounted with the words “Proof that Tony Stark has a heart,” which doubles as the franchise’s thesis.

Why a chest-sized reactor is still science fiction

The closest real machine is a tokamak, a doughnut-shaped fusion device the size of a building. It runs at up to 270 million degrees Fahrenheit (about 150 million °C), roughly ten times hotter than the Sun’s core. Holding plasma at that temperature takes magnetic coils dozens of feet across, and cooling the whole system eats thousands of tons of water. The other snag is conversion, since most power plants on Earth still boil water to spin a turbine. Stark’s zero-loss energy converter skips that entire step, which is the part of the fantasy a chest-sized reactor leans on hardest.

Helion Energy’s Polaris prototype in Everett, Washington is built to recover electricity straight from the expanding plasma through electromagnetic induction, skipping the steam cycle entirely. The company said in February 2026 that it reached measurable deuterium-tritium fusion and 150 million °C plasma. No published results confirm net power, and Polaris is a 62-foot (19 m) machine, so nobody is wearing one to the Avengers premiere. Its Orion plant, built for Microsoft, is slated to come online in 2028. Dianax’s full 3D breakdown is on YouTube, and it makes a great warm-up before Doomsday. Whatever Downey does as Doom, the most compelling thing Tony ever built is still that glowing ring, and engineers are still chasing it.

The post How Iron Man’s arc reactor works, explained part by part first appeared on Yanko Design.