
Monthly Archives: October 2026
iPhone Air 2 Leak Shows Apple May Fix Its Biggest Mistakes

Apple is preparing to redefine the smartphone experience with the highly anticipated iPhone Air 2, set to launch in early 2024 alongside the iPhone 18 and iPhone 18e. This next-generation device is designed to address the limitations of its predecessor, offering a sleeker design, enhanced battery life, and an advanced dual-camera system. These upgrades highlight […]
The post iPhone Air 2 Leak Shows Apple May Fix Its Biggest Mistakes appeared first on Geeky Gadgets.
Why CPU overclocking is mostly now a thing of the past

How to properly clean your solar panels (and why it’s important)

Here’s how much the MacBook Pro cost in 2021 vs. 2026

$20 Price Gap Pits XREAL Aura Against Meta VR Glasses

The XREAL Aura has introduced a compelling alternative to Meta’s VR glasses, offering a distinct focus on augmented reality (AR) rather than full virtual immersion. As Tech Court explains, the Aura employs optical see-through technology paired with electrochromic dimming, allowing users to seamlessly blend digital overlays with their physical environment. This approach contrasts sharply with […]
The post $20 Price Gap Pits XREAL Aura Against Meta VR Glasses appeared first on Geeky Gadgets.
This 3D-Printed Saddle Is Designed Around the Horse, Not Adjusted to It

A saddle is one of the most intimate pieces of equipment in equestrian sport. It sits at the exact point where two athletes meet, translating weight, movement, balance, and intention between horse and rider. Yet for something so central to that relationship, saddle fitting has remained surprisingly dependent on traditional measuring methods, adjustment, and compromise. Catalyst asks what happens when that process becomes precise enough to design around the individual horse from the beginning.
Designed by Hallie Eskey, Catalyst is a custom-fit, 3D-printed jumping saddle developed specifically for the demands of show jumping. The sport subjects both horse and rider to repeated impact as they accelerate, take off, land, and immediately reorganize their balance for the next obstacle. In that environment, the saddle has to do far more than simply provide a seat. Poor fit can create pressure, discomfort, and injury for the horse while interfering with the subtle communication between horse and rider. Catalyst approaches the saddle as performance equipment shaped by anatomy rather than a standardized object that the body must adapt to.
Designer: Hallie Eskey

The process begins with LiDAR 3D scanning. Instead of relying solely on manual measurements of the horse’s back, the horse is digitally captured and brought into CAD software. That information becomes the basis for a parametric lattice structure modeled specifically around the horse’s curves. The result is a level of customization that would be difficult to achieve through conventional hand measuring alone.
That lattice is also Catalyst’s most recognizable visual feature. Rather than hiding its internal structure beneath layers of material, the saddle leaves its carbon fiber geometry exposed. It gives the object an almost architectural quality. The pattern is not there simply to make Catalyst look futuristic. Carbon fiber allows the structure to remain lightweight while providing shock absorption, addressing two qualities that become especially important when horse and rider are repeatedly experiencing the force of landing.

There is something compelling about seeing a product associated with centuries of tradition adopt a visual language that feels closer to computational design, performance footwear, or aerospace engineering. Yet Catalyst does not attempt to erase the craft associated with saddle making. Leather remains part of the object, and traditional leather craft was incorporated into the development of the project. The result sits somewhere between artisan practice and digital fabrication, allowing each to solve the problems it handles best.
The same thinking extends into the way Catalyst is assembled. The saddle is designed around a reduced number of components, with rivets used in place of synthetic adhesives. This makes the construction easier to disassemble, repair, and replace in parts rather than treating the saddle as a permanently bonded object. It is a quieter approach to sustainability than simply changing materials. Instead, longevity is designed into the architecture of the product itself.


That consideration is particularly relevant for highly specialized sporting equipment. Performance products tend to sit in an uncomfortable space between durability and technological progression. They need to withstand demanding use, yet improvements in materials and manufacturing continually push them forward. Designing components that can be separated and replaced gives Catalyst a way to accommodate both realities.
The final saddle grew out of a 20-week development process that included research with equestrian professionals, saddle teardowns, detailed sketching, two full-scale prototypes, iterative CAD modeling, and parametric development in Grasshopper. Those stages matter because Catalyst could easily have become an exercise in applying an impressive manufacturing technology to a familiar object. Instead, the technology follows the actual constraints of the sport and the anatomy of the animal.

Perhaps the most interesting thing about Catalyst is that its innovation begins with fit rather than form. The striking lattice and contemporary silhouette are consequences of rethinking how a saddle can be made, adjusted, repaired, and individualized. 3D scanning allows the horse to become the starting geometry. 3D printing allows that geometry to become physical. Carbon fiber responds to weight and impact. Riveted construction considers what happens when the product eventually needs attention.
Catalyst suggests a different future for equestrian equipment, one where customization does not depend entirely on adjustment after manufacturing. Instead, the individual horse can inform the object before it is made. For a sport built around communication between two bodies, designing the equipment around those bodies feels less like a technological spectacle and more like a logical next step.
The post This 3D-Printed Saddle Is Designed Around the Horse, Not Adjusted to It first appeared on Yanko Design.
Apple’s "Welcome Home” Event Confirmed: What is Apple Actually Announcing?

Apple has officially announced its October 13th event, scheduled to begin at 9:00 a.m. Eastern Time in New York City. With the tagline “Welcome home,” the event is expected to focus on innovations in smart home technology. Apple is likely to unveil new products, accessories and software updates designed to enhance the connected home experience. […]
The post Apple’s “Welcome Home” Event Confirmed: What is Apple Actually Announcing? appeared first on Geeky Gadgets.
REA Reverse Engineer Anything Combines Ghidra, Hopper and IDA Pro

REA (Reverse Engineer Anything) has quickly become one of GitHub’s fastest-growing repositories. Designed to streamline reverse engineering, it combines frameworks like Ghidra and IDA Pro into a single command-line interface. According to Rob Shocks, REA enables users to dissect application logic, map system components and observe network activity, even without access to the original source […]
The post REA Reverse Engineer Anything Combines Ghidra, Hopper and IDA Pro appeared first on Geeky Gadgets.
Samsung Galaxy Z TriFold 2: New Leaks Reveal Major Upgrades and Possible Early Launch

Samsung’s next-generation tri-fold smartphone is beginning to take shape, with the latest leaks revealing some interesting details about the upcoming Samsung Galaxy Z TriFold 2. While the original model demonstrated what was possible with a smartphone that unfolds into a tablet-sized display, its successor could address several of the biggest compromises associated with the first-generation […]
The post Samsung Galaxy Z TriFold 2: New Leaks Reveal Major Upgrades and Possible Early Launch appeared first on Geeky Gadgets.