Intuitive Machines is taking its shot at nailing the first commercial moon landing

Houston-based space company Intuitive Machines is gearing up for an actual moonshot at the end of this month, when it’ll try to land a spacecraft named Odysseus on the lunar surface — ideally without it breaking in the process. The mission follows Astrobotic’s unsuccessful attempt in January; that company’s lander, Peregrine, never made it to the moon due to a propellant leak that cut its journey short. Peregrine’s failure means Intuitive Machines’ IM-1 mission could be the first ever commercial moon landing if it makes it there intact.

Intuitive Machines is hoping to make its landing attempt on February 22, targeting the Malapert A crater near the moon’s south pole for touchdown. This arrival date is dependent on Odysseus, one of the company’s Nova-C class landers, leaving Earth atop a SpaceX Falcon 9 rocket sometime between February 14 and February 16. The launch window opens at 12:57AM ET on Wednesday.

Odysseus is the first of three Nova-C landers Intuitive Machines plans to send to the moon this year, all of which will have commercial payloads on board and NASA instruments as contracted under the agency’s Commercial Lunar Payload Services (CLPS) program. At 14 feet tall (4.3 meters), the lander is roughly the size of a giraffe and can carry about 280 pounds (130kg) of cargo. Its mission, if it nails a soft landing, will be a short but potentially valuable one for informing future excursions to the region, including NASA’s upcoming crewed Artemis missions. Orbiting probes have found evidence of water ice at the lunar south pole, which could be used for astronaut subsistence and even fuel, making it an area of high interest for human exploration.

The lunar southpole
NASA

The solar-powered craft and any functional equipment it’s carrying are only expected to be in working condition for about a week before the onset of lunar night, a 14-day period of frigid darkness that the company says will leave the lander inoperable. But while everything’s up and running, the various instruments will gather data at the surface. NASA awarded Intuitive Machines a $77 million contract for the delivery of its payloads back in 2019, and there are six NASA instruments now hitching a ride on Odysseus.

One, the Laser Retroreflector Array (LRA), will “function as a permanent location mark” from its position on the moon after landing to help incoming spacecraft determine their distance from the surface, according to NASA. The lander is also carrying the Navigation Doppler LIDAR for Precise Velocity and Range Sensing (NDL), a sensor that measures velocity and altitude to better guide the descent, and the Lunar Node 1 Navigation Demonstrator (LN-1) to support communication and autonomous navigation in future missions.

NASA is also sending instruments to study surface plumes — everything that gets kicked up when the lander touches down — along with radio waves and the effects of space weather. That includes the Stereo Cameras for Lunar Plume-Surface Studies (SCALPSS), which will capture images of these dust plumes, and the Radio wave Observation at the Lunar Surface of the photoElectron Sheath (ROLSES) instrument.

The rest of the payloads on board Odysseus are commercial. Columbia Sportswear worked with Intuitive Machines to incorporate the brand’s Apollo-inspired Omni-Heat Infinity thermal reflective material, which is being used for this mission to help protect the cryogenic propulsion tank, according to Intuitive Machines. Students at Embry-Riddle Aeronautical University developed a camera system dubbed the EagleCam that will attempt to separate from the lander before it touches down and snap a picture of the moment from a third-person point of view. EagleCam is also equipped with an experimental dust-removal system.

Intuitive Machines' Odysseus Nova-C lander is pictured in front of an American flag in a dimly lit warehouse room
Intuitive Machines

There are even some Jeff Koons sculptures heading to the moon, which will have physical and NFT counterparts back on Earth. In Koons’ Moon Phase piece, 125 small stainless steel sculptures of the moon at different phases are encased in a clear cube made by 4Space, with the names of important historical figures from around the world listed below each sphere. The International Lunar Observatory Association, based in Hawaii, and Canadensys Aerospace are sending a 1.3-pound dual-camera system called ILO-X, with which they’ll attempt to capture wide and narrow field images of the Milky Way from the moon.

Odysseus is also carrying small discs called “Lunagrams” from Galactic Legacy Labs that contain messages from Earth, including text, images, audio and archives from major databases such as the Arch Mission Foundation and the English-language version of Wikipedia. Similar archival materials were sent to space with Peregrine last month. The information technology company Lonestar plans to demonstrate its Disaster Recovery as a Service (DRaaS) by storing data on the lander and transmitting documents ( including the US Declaration of Independence) between Earth and the moon. It’ll follow this up with a prototype mini data center on Intuitive Machines’ next launch.

Now, the pressure is on for the Odysseus Nova-C lander to actually get to the lunar surface safely. This year started off rocky for moon missions, with the failure of Astrobotic’s Peregrine and a descent hiccup that caused JAXA’s SLIM spacecraft to faceplant into the lunar surface (though the latter was miraculously able to resume functions to some degree after a few days). Intuitive Machines will have other chances to get it right if it doesn’t this time — it has multiple missions already booked up — but only one private lander can be “first.”

This article originally appeared on Engadget at https://www.engadget.com/intuitive-machines-is-taking-its-shot-at-nailing-the-first-commercial-moon-landing-170024349.html?src=rss

NASA’s Jet Propulsion Laboratory is laying off 570 workers

Even NASA is not immune to layoffs. The agency says it's cutting around 530 employees from its Jet Propulsion Laboratory (JPL) in California amid budget uncertainty. That's eight percent of the facility's workforce. JPL is laying off about 40 contractors too, just weeks after imposing a hiring freeze and canning 100 other contractors. Workers are being informed of their fates today.

"After exhausting all other measures to adjust to a lower budget from NASA, and in the absence of an FY24 appropriation from Congress, we have had to make the difficult decision to reduce the JPL workforce through layoffs," NASA said in a statement spotted by Gizmodo. "The impacts will occur across both technical and support areas of the Lab. These are painful but necessary adjustments that will enable us to adhere to our budget allocation while continuing our important work for NASA and our nation."

Uncertainty over the final budget that Congress will allocate to NASA for 2024 has played a major factor in the cuts. It's expected that the agency will receive around $300 million for Mars Sample Return (MSR), an ambitious mission in which NASA plans to launch a lander and orbiter to the red planet in 2028 and bring back soil. In its 2024 budget proposal, NASA requested just under $950 million for the project.

“While we still do not have an FY24 appropriation or the final word from Congress on our Mars Sample Return (MSR) budget allocation, we are now in a position where we must take further significant action to reduce our spending,” JPL Director Laurie Leshin wrote in a memo. "In the absence of an appropriation, and as much as we wish we didn’t need to take this action, we must now move forward to protect against even deeper cuts later were we to wait."

NASA has yet to provide a full cost estimate for MSR, though an independent report pegged the price at between $8 billion and $11 billion. In its proposed 2024 budget, the Senate Appropriations subcommittee ordered NASA to submit a year-by-year funding plan for MSR. If the agency does not do so, the subcommittee warned that the mission could be canceled.

That's despite MSR having enjoyed success so far. The Perseverance rover has dug up some soil samples that contain evidence of organic matter and would warrant closer analysis were NASA able to bring them back to Earth. The samples could help scientists learn more about Mars, such as whether the planet ever hosted life.

This article originally appeared on Engadget at https://www.engadget.com/nasas-jet-propulsion-laboratory-is-laying-off-570-workers-185336632.html?src=rss

Japan’s moon lander took this eerie photo before being enveloped by lunar night

Against all odds, Japan’s SLIM lander managed to turn back on more than a week after it plopped upside down onto the surface of the moon — but now, it’s gone dormant for the duration of the lunar night, and it may not be able to wake up again. The SLIM team from the Japanese space agency, JAXA, on Thursday shared the last image the lander captured at the moon’s Shioli crater before dusk, as night encroached. Lunar night lasts the equivalent of two Earth weeks and can get colder than -200 degrees Fahrenheit.

The team has confirmed that the solar powered lander is in a dormant state that will last at least the duration of the lunar night. Its chances of resuming operations afterward aren’t great, but then again, it’s already surprised us once. “Although SLIM was not designed for the harsh lunar nights, we plan to try to operate again from mid-February, when the Sun will shine again on SLIM’s solar cells,” the team wrote on X. If this truly is SLIM’s last photo, it sure is a spooky one.

This article originally appeared on Engadget at https://www.engadget.com/japans-moon-lander-took-this-eerie-photo-before-being-enveloped-by-lunar-night-221438290.html?src=rss

The European Space Agency will test 3D printing metal on the ISS

The first metal 3D printer that will be used in space is on its way to the International Space Station. The Cygnus NG-20 supply mission, which is carrying the 180kg (397 lbs) printer, launched on Tuesday and is set to arrive at the ISS on Thursday.

Astronaut Andreas Mogensen will install the printer, which Airbus developed for the European Space Agency. The machine will then be controlled and monitored from Earth.

Polymer-based 3D printers have been employed on the ISS in the past, but metal 3D printing in orbit is said to pose a trickier challenge. The machine will use a form of stainless steel that’s often used for water treatment and medical implants because of how well it resists corrosion.

After the stainless steel wire is pushed into the printing area, the printer melts it with a laser said to be a million times more powerful than a typical laser pointer. The printer then adds the melted metal to the print.

The melting point of the metal is around 1,400°C and the printer will run inside a completely sealed box. Before the printer can operate, it needs to vent its oxygen into space and replace its atmosphere with nitrogen. Otherwise, the melted metal would oxidize when it became exposed to oxygen.

Given the higher temperatures that are employed compared with a plastic 3D printer (which heats to around 200°C), "the safety of the crew and the Station itself have to be ensured — while maintenance possibilities are also very limited," ESA technical officer Rob Postema told the agency's website. "If successful though, the strength, conductivity and rigidity of metal would take the potential of in-space 3D printing to new heights.”

Four test prints are scheduled. The printer will replicate reference prints that have been created back on Earth. The two versions will be compared to help scientists understand how printing quality and performance differs in space. Even though each print will weigh less than 250g (8.8 ounces) and be smaller than a soda can, it will take the printer between two and four weeks to create each one. The printer will only be in operation for a maximum of four hours each day, since its fans and motor are fairly loud and the ISS has noise regulations.

If the experiment goes well, it will pave the way for astronauts and space agencies to print required tools or parts without having to send the items on resupply missions. Metal 3D printing could also help with the construction of a lunar base using recycled materials or transformed regolith (moon soil and rock). It may come in useful for missions to Mars too.

This article originally appeared on Engadget at https://www.engadget.com/the-european-space-agency-will-test-3d-printing-metal-on-the-iss-154413028.html?src=rss

Here’s a video of Doom running on gut bacteria, proving you really can play the game on anything

An MIT biotech researcher has been able to run the iconic computer game Doom using actual gut bacteria. Lauren Ramlan didn’t get the game going on a digital simulation of bacteria, but turned actual bacteria into pixels to display the 30-year-old FPS, as reported by Rock Paper Shotgun.

Specifically, Ramlan created a display inside of a cell wall made entirely of E. coli bacteria. The 32x48 1-bit display may not win any resolution awards, but who cares, right? It’s Doom running on bacteria. The researcher dosed the bacteria with fluorescent proteins to get them to light up just like digital pixels.

There’s a couple of caveats here. First of all, the bacteria aren’t actually running the game, as we still haven't cracked that whole “inject biological matter with digital code” thing. Instead, the bacteria combine to act as a teensy-tiny monitor that renders gameplay for the beloved shooter.

Also, there’s the subject of frame rate, which is always an important metric when considering FPS games. To be blunt, the frame rate is atrocious, likely due to the fact that bacteria were never intended to display 3D video games. It takes 70 minutes for the bacteria to illuminate one frame of the game and another eight hours to return to its starting state. This translates to nearly nine hours per frame, which means it would take around 600 years to play the game from start to finish. That’s even worse than Cyberpunk 2077 at launch.

So while this won’t present the smoothest gameplay experience, it’s still a pretty nifty idea. Also, it further proves the theory that Doom can run on just about anything. We’ve seen the game running on pregnancy tests, rat brain neurons and even inside of other titles, like the sequel Doom II and Minecraft. Doom is the great equalizer. May it continue to surprise us for the next 30 years.

This article originally appeared on Engadget at https://www.engadget.com/heres-a-video-of-doom-running-on-gut-bacteria-proving-you-really-can-play-the-game-on-anything-184629896.html?src=rss

Here’s a video of Doom running on gut bacteria, proving you really can play the game on anything

An MIT biotech researcher has been able to run the iconic computer game Doom using actual gut bacteria. Lauren Ramlan didn’t get the game going on a digital simulation of bacteria, but turned actual bacteria into pixels to display the 30-year-old FPS, as reported by Rock Paper Shotgun.

Specifically, Ramlan created a display inside of a cell wall made entirely of E. coli bacteria. The 32x48 1-bit display may not win any resolution awards, but who cares, right? It’s Doom running on bacteria. The researcher dosed the bacteria with fluorescent proteins to get them to light up just like digital pixels.

There’s a couple of caveats here. First of all, the bacteria aren’t actually running the game, as we still haven't cracked that whole “inject biological matter with digital code” thing. Instead, the bacteria combine to act as a teensy-tiny monitor that renders gameplay for the beloved shooter.

Also, there’s the subject of frame rate, which is always an important metric when considering FPS games. To be blunt, the frame rate is atrocious, likely due to the fact that bacteria were never intended to display 3D video games. It takes 70 minutes for the bacteria to illuminate one frame of the game and another eight hours to return to its starting state. This translates to nearly nine hours per frame, which means it would take around 600 years to play the game from start to finish. That’s even worse than Cyberpunk 2077 at launch.

So while this won’t present the smoothest gameplay experience, it’s still a pretty nifty idea. Also, it further proves the theory that Doom can run on just about anything. We’ve seen the game running on pregnancy tests, rat brain neurons and even inside of other titles, like the sequel Doom II and Minecraft. Doom is the great equalizer. May it continue to surprise us for the next 30 years.

This article originally appeared on Engadget at https://www.engadget.com/heres-a-video-of-doom-running-on-gut-bacteria-proving-you-really-can-play-the-game-on-anything-184629896.html?src=rss

Scientists discover weird virus-like ‘obelisks’ in the human gut and mouth

We may have an adequate understanding of the human body in that, well, we invented aspirin and sequenced the genome, but researchers still find out new things about the humble homo sapien all of the time. Case in point? Scientists just discovered a previously unknown entity hanging out in the human gut and mouth. The researchers are calling these virus-like structures “obelisks”, due to their presumed microscopic shape.

These entities replicate like viruses, but are much smaller and simpler. Due to the minuscule size, they fall into the “viroid” class, which are typically single-stranded RNAs without a protein shell. However, most viroids are infectious agents that cause disease and it doesn’t look like that’s the case with these lil obelisks, as reported by Live Science.

So why are they inside of us and what do they do? That’s the big question. The discoverers at Stanford University, the University of Toronto and the Technical University of Valencia have some theories. They may influence gene activity within the human microbiome, though they also hang out in the mouth. To that end, they have been found using the common mouth-based bacterium Streptococcus sanguinis as a host. It’s been suggested that these viroids infect various bacteria in both the mouth and gut, though we don’t know why.

Some of the obelisks seem to contain instructions for enzymes required for replication, so they look to be more complex than your average viroid, as indicated by Science. In any event, there has been a “chicken and the egg” debate raging for years over whether viruses evolved from viroids or if viroids actually evolved from viruses, so further study could finally end that argument.

While we don’t exactly know what these obelisk sequences do, scientists have discovered just how prevalent they are in our bodies. These sequences are found in roughly seven percent of human gut bacteria and a whopping 50 percent of mouth bacteria. The gut-based structures also feature a distinctive RNA sequence when compared to the mouth-based obelisks. This diversity has led researchers to proclaim that they “comprise a class of diverse RNAs that have colonized, and gone unnoticed in, human, and global microbiomes.”

“I think this is one more clear indication that we are still exploring the frontiers of this viral universe,” computational biologist Simon Roux of the DOE Joint Genome Institute at Lawrence Berkeley National Laboratory told Science.

“It’s insane,” added Mark Peifer, a cell and developmental biologist at the University of North Carolina at Chapel Hill. “The more we look, the more crazy things we see.”

Speaking of frontier medicine, scientists also recently created custom bacteria to detect cancer cells and biometric implants that detect organ rejection after replacement surgery. The human body may be just about as vast and mysterious as the ocean, or even space, but we’re slowly (ever so slowly) unraveling its puzzles.

This article originally appeared on Engadget at https://www.engadget.com/scientists-discover-weird-virus-like-obelisks-in-the-human-gut-and-mouth-162644669.html?src=rss

Scientists discover weird virus-like ‘obelisks’ in the human gut and mouth

We may have an adequate understanding of the human body in that, well, we invented aspirin and sequenced the genome, but researchers still find out new things about the humble homo sapien all of the time. Case in point? Scientists just discovered a previously unknown entity hanging out in the human gut and mouth. The researchers are calling these virus-like structures “obelisks”, due to their presumed microscopic shape.

These entities replicate like viruses, but are much smaller and simpler. Due to the minuscule size, they fall into the “viroid” class, which are typically single-stranded RNAs without a protein shell. However, most viroids are infectious agents that cause disease and it doesn’t look like that’s the case with these lil obelisks, as reported by Live Science.

So why are they inside of us and what do they do? That’s the big question. The discoverers at Stanford University, the University of Toronto and the Technical University of Valencia have some theories. They may influence gene activity within the human microbiome, though they also hang out in the mouth. To that end, they have been found using the common mouth-based bacterium Streptococcus sanguinis as a host. It’s been suggested that these viroids infect various bacteria in both the mouth and gut, though we don’t know why.

Some of the obelisks seem to contain instructions for enzymes required for replication, so they look to be more complex than your average viroid, as indicated by Science. In any event, there has been a “chicken and the egg” debate raging for years over whether viruses evolved from viroids or if viroids actually evolved from viruses, so further study could finally end that argument.

While we don’t exactly know what these obelisk sequences do, scientists have discovered just how prevalent they are in our bodies. These sequences are found in roughly seven percent of human gut bacteria and a whopping 50 percent of mouth bacteria. The gut-based structures also feature a distinctive RNA sequence when compared to the mouth-based obelisks. This diversity has led researchers to proclaim that they “comprise a class of diverse RNAs that have colonized, and gone unnoticed in, human, and global microbiomes.”

“I think this is one more clear indication that we are still exploring the frontiers of this viral universe,” computational biologist Simon Roux of the DOE Joint Genome Institute at Lawrence Berkeley National Laboratory told Science.

“It’s insane,” added Mark Peifer, a cell and developmental biologist at the University of North Carolina at Chapel Hill. “The more we look, the more crazy things we see.”

Speaking of frontier medicine, scientists also recently created custom bacteria to detect cancer cells and biometric implants that detect organ rejection after replacement surgery. The human body may be just about as vast and mysterious as the ocean, or even space, but we’re slowly (ever so slowly) unraveling its puzzles.

This article originally appeared on Engadget at https://www.engadget.com/scientists-discover-weird-virus-like-obelisks-in-the-human-gut-and-mouth-162644669.html?src=rss

Neuralink’s brain chip has been implanted in a human, Elon Musk says

The first human patient has received a Neuralink brain implant, according to Elon Musk. The procedure was apparently successful, with Musk saying the individual “is recovering well” one day after the surgery.

Neuralink, which aims to create brain-computer interfaces (BCI), began recruiting human patients for its first clinical trial last fall after getting the green light from the FDA. At the time, Neuralink said that people “who have quadriplegia due to cervical spinal cord injury or amyotrophic lateral sclerosis (ALS)” may qualify for the study. “The initial goal of our BCI is to grant people the ability to control a computer cursor or keyboard using their thoughts alone,” the company wrote in a statement.

Musk didn’t share any other details about the procedure or the status of the trial. He said that “initial results show promising neuron spike detection.” Successfully implanting its device into a human patient would be a major milestone for the company, which Musk has claimed could one day enable people to experience alternate realities. The company is also facing a federal investigation for allegedly violating animal welfare laws.

This article originally appeared on Engadget at https://www.engadget.com/neuralinks-brain-chip-has-been-implanted-in-a-human-elon-musk-says-235434320.html?src=rss

Neuralink’s brain chip has been implanted in a human, Elon Musk says

The first human patient has received a Neuralink brain implant, according to Elon Musk. The procedure was apparently successful, with Musk saying the individual “is recovering well” one day after the surgery.

Neuralink, which aims to create brain-computer interfaces (BCI), began recruiting human patients for its first clinical trial last fall after getting the green light from the FDA. At the time, Neuralink said that people “who have quadriplegia due to cervical spinal cord injury or amyotrophic lateral sclerosis (ALS)” may qualify for the study. “The initial goal of our BCI is to grant people the ability to control a computer cursor or keyboard using their thoughts alone,” the company wrote in a statement.

Musk didn’t share any other details about the procedure or the status of the trial. He said that “initial results show promising neuron spike detection.” Successfully implanting its device into a human patient would be a major milestone for the company, which Musk has claimed could one day enable people to experience alternate realities. The company is also facing a federal investigation for allegedly violating animal welfare laws.

This article originally appeared on Engadget at https://www.engadget.com/neuralinks-brain-chip-has-been-implanted-in-a-human-elon-musk-says-235434320.html?src=rss