Tag Archives: dyson

Dyson Just Made a Wet Cleaner That Slides Under Your Sofa

Posted on by

Nobody has ever looked at a traditional mop and thought, “Yes, this is the peak of human ingenuity.” Mopping has always been the cleaning task that feels like a punishment. You fill a bucket, push dirty water across the floor, realize the mop head smells suspect, and then spend the next 20 minutes waiting for everything to dry. It works, technically. But it’s never been good. Dyson wants to change that conversation entirely with its newest launch, the PencilWash, and the case it makes is surprisingly compelling.

The PencilWash follows the same design philosophy as the PencilVac, Dyson’s super-slim cordless vacuum that turned heads when it launched in 2025. The idea is simple but radical: what if cleaning tools didn’t have to be bulky? The PencilWash takes that premise into wet cleaning territory with a 38mm-diameter handle, which, true to the name, is roughly the thickness of a pencil. At just 4.9 pounds total and only 0.8 pounds in the hand, it feels like a completely different category of product from the heavy, tank-like floor washers already on the market.

Designer: Dyson

The slimness isn’t just a style flex. Because the machine lays flat to 170 degrees, it can slide under furniture as low as 6 inches off the ground. That means the coffee table, the media console, the bed frame, all those places where crumbs and sticky residue build up because your vacuum simply can’t reach them, are now fair game. It also maneuvers along walls and skirting boards, which is where most wet cleaners give up and go home. The PencilWash was clearly designed with real living spaces in mind, not idealized showroom floors.

What makes the tech behind it genuinely clever is Dyson’s three-part cleaning approach: hydration, agitation, and extraction. The machine uses a high-density microfiber roller packed with 64,000 filaments per square centimeter, spinning at 650 RPM, to pick up both wet and dry debris at the same time. But the part that truly sets it apart is the 8-point hydration system, which feeds fresh water to the roller on a continuous, controlled basis. Dirty water is extracted from the roller on every single rotation and funneled into a separate 12 fl oz dirty water tank, kept entirely away from the 10 fl oz clean water supply. What that means in practice is that you’re always mopping with fresh water, not just spreading the same grimy water around in circles.

The filter-free design is another deliberate engineering choice. Most wet cleaners rely on filters that trap debris, harbor bacteria, develop odors over time, and eventually clog up. Dyson removed the filter completely, which eliminates the risk of sludge buildup, performance drops, and that particular cleaning-appliance smell you’ve probably already encountered. The clean water tank covers up to 1,076 square feet per fill, enough for most apartments and medium-sized homes in one run.

Dyson also pairs the PencilWash with its O2 Probiotic hard floor cleaning solution, a non-foaming, non-toxic formula that cleans at the microscopic level and is safe around pets and kids. It’s the kind of optional companion product that actually earns its place, rather than feeling like an upsell for upselling’s sake.Battery life sits at 30 minutes per charge, with a 3.5-hour charge time. For bigger homes, there’s an optional swappable battery that extends the range without much hassle.

The Dyson PencilWash goes on sale March 17, 2026, in the US at $349. It launched earlier in the UK at £299.99 and in Australia at AU$499. If you want to be among the first to get your hands on one, Dyson has a waitlist open right now. What Dyson is really building with the Pencil lineup is a new design logic for home cleaning. Smaller doesn’t mean weaker. Slimmer doesn’t mean a compromise. The PencilWash makes a strong argument that the bulky, filter-dependent appliances we’ve tolerated for years were never really the best option available. They were just the only one we had.

The post Dyson Just Made a Wet Cleaner That Slides Under Your Sofa first appeared on Yanko Design.

This $350 Dyson Air Purifier Borrowed Tech From Jet Engines

Posted on by

There’s something oddly satisfying about watching a company completely reinvent its own playbook. Dyson has built its reputation on that bladeless Air Multiplier technology, the kind of innovation that made you stop and think, “Wait, how does that even work?” But with the HushJet Compact Purifier, the brand is taking a totally different approach, drawing inspiration from an unexpected source: jet engines.

This little machine marks a departure from what we’ve come to expect from Dyson’s air purifiers. Instead of that signature circular opening, you get a star-shaped nozzle that looks like it belongs in an aerospace engineering lab. It’s not just for show, though. That unique design channels high-velocity airflow while keeping things whisper-quiet, hitting just 24 decibels in night mode. For context, that’s quieter than your average library and about the same volume as someone whispering sweet nothings into your ear.

Designer: Dyson

The HushJet measures 18.5 inches tall and just over 9 inches in diameter, weighing in at a manageable 7 pounds. It’s genuinely compact, the kind of appliance that can slip into a corner of your bedroom or perch on a kitchen counter without demanding attention. But don’t let the small footprint fool you. This purifier can handle rooms up to 203 square feet, making it perfectly suited for bedrooms, home offices, or cozy apartments.

What really sets the HushJet apart is its new filtration system. The electrostatic filter captures 99.97% of particles as small as 0.3 microns, including the usual suspects like pollen, dust, and pet dander. If you’ve got pets at home, this matters more than you might think. Those microscopic skin cells and protein particles from Fluffy’s grooming sessions become airborne allergens, and the HushJet’s activated carbon layer tackles both the dander and the inevitable pet odors.

Here’s where things get interesting from a sustainability standpoint. The electrostatic filter lasts up to five years, which is five times longer than previous Dyson filters. That means fewer replacements, less waste, and one less thing to remember on your shopping list. The filter uses less material while being more energy efficient, a win across the board for anyone trying to lighten their environmental footprint.

The technology powering this thing is genuinely clever. Dyson’s engineers borrowed aerodynamic principles from jet engines to create that focused stream of purified air. The star-shaped nozzle reduces turbulence and attenuates sound waves from the high-speed compressor, which is how they achieved that library-quiet operation. The whole system is fully sealed, meaning the nasty stuff it captures stays trapped inside rather than escaping back into your breathing space.

Smart features come standard. The built-in sensors monitor air quality in real time, automatically adjusting performance based on what’s floating around your room. You can also control everything through the MyDyson app, tweaking settings from your phone or setting schedules so the purifier runs only when you need it. That auto mode is particularly useful for energy efficiency, since the machine only kicks into gear when pollution levels actually warrant it.

The HushJet comes in two color options: Black/Teal and White/Silver. Both have that sleek, minimalist aesthetic Dyson is known for, the kind of design that doesn’t scream “appliance” but instead quietly complements your space. At $349.99, it sits at the higher end of the compact purifier market, though the combination of performance, filter longevity, and that jet-engine-inspired engineering might justify the price tag for air quality enthusiasts.

For anyone dealing with allergies, the HushJet makes a solid case for itself. By pulling pollen, dust, and other allergens out of circulation, it can help reduce those annoying symptoms like sniffles, scratchy throats, and itchy eyes that tend to worsen at night. Better air quality translates to better sleep, which is something most of us could use more of.

What Dyson has done here is take everything they learned from years of air purification technology and compress it into a surprisingly powerful package. The jet engine inspiration isn’t just a marketing gimmick. It’s a fundamental rethinking of how to move air efficiently and quietly in a small space. Whether you’re sensitive to noise, short on square footage, or just appreciate clever engineering, the HushJet Compact Purifier delivers on its promise to be small but mighty.

The post This $350 Dyson Air Purifier Borrowed Tech From Jet Engines first appeared on Yanko Design.

Dyson x Porter OnTrac Limited Edition Redefines the Commuter Kit as a Unified Design System

Posted on by

The Dyson x Porter OnTrac Limited Edition collaboration arrives as a pointed departure from typical brand partnerships. Rather than applying co-branded graphics to existing products, this project positions two objects as components of a single system built around commuter behavior. The headphones and bag share materials, color logic, and ergonomic intent. They function as a kit, not a bundle. The production run is limited to 380 individually numbered sets distributed through select retail locations in Japan and China, plus official online channels.

Designer: Dyson x Porter

Porter, the accessories division of Yoshida & Co., approaches its 90th anniversary with a history rooted in textile construction and hardware refinement. Dyson enters audio as an engineering house known for motors, airflow systems, and computational design. The collaboration required both parties to subordinate individual brand language to a shared design constraint. The scarcity is intentional. This is not a mass market recommendation. It is a design artifact that demonstrates what becomes possible when two craft traditions converge on a single behavioral problem.

Collaboration Context

Porter operates under Yoshida & Co., a Japanese company founded in 1935. The brand built its reputation on hand construction, obsessive material selection, and a visual language drawn from military surplus, particularly the MA 1 flight jacket. Porter bags are assembled by hand in Japan, often incorporating dozens of discrete components into a single product. The 90th anniversary celebration, designated Project 006, called for a collaboration that would extend Porter’s construction philosophy into new territory.

Dyson’s audio division emerged more recently with the Zone headphones in 2022, combining noise cancellation with air purification in an ambitious but polarizing form factor. OnTrac followed as a more focused over-ear design, retaining Dyson’s emphasis on driver quality, noise isolation, and extended battery performance. Jake Dyson, chief engineer and son of founder James Dyson, supervised the Porter collaboration.

Both companies ceded ground to produce objects that read as parts of a single system rather than co-branded accessories. Porter’s expertise in understanding how objects move with the body informed Dyson’s thinking about where headphones rest when not in use.

Headphones as Object One

The OnTrac headphones in this collaboration begin with Dyson’s existing flagship architecture. The cups use angled geometry that exposes machined aluminum surfaces and microfiber cushions. What distinguishes this edition is the outer cap treatment. Custom panels carry the Porter logo, and the color blocking shifts to navy, green, and orange, tones drawn directly from the MA 1 flight jacket vocabulary that has defined Porter’s aesthetic for decades. The palette establishes visual continuity with the bag.

The driver assembly uses 40 millimeter neodymium transducers with 16 ohm impedance, spanning a frequency response from 6 Hz to 21 kHz. Eight microphones power the active noise cancellation system, capable of reducing ambient sound by up to 40 dB. Battery life extends to 55 hours with ANC engaged. USB-C fast charging restores usable runtime quickly. Bluetooth 5.0 handles connectivity, and the MyDyson app provides listening mode control and voice assistant integration. These specifications remain unchanged from the standard OnTrac.

The weight sits at approximately 0.45 kg, a figure that exceeds many competitors as a consequence of Dyson’s aluminum construction and driver housing decisions. The cushion geometry distributes pressure across a wider contact area, and the microfiber surface reduces heat buildup during extended sessions. The comfort profile favors long commutes over lightweight portability. The headphones are designed to be worn for hours, not minutes.

The industrial aesthetic leans toward precision equipment rather than consumer electronics. Exposed metal, visible fasteners, and functional geometry communicate that these headphones prioritize engineering integrity over lifestyle signaling. The joystick controls on the right cup allow volume adjustment, track navigation, and mode switching without reaching for a phone.

Technical Specification Snapshot

Specification Value
Driver configuration 40 mm neodymium transducers, 16 ohm impedance
Frequency response 6 Hz to 21 kHz
Active noise cancellation Up to 40 dB reduction via 8 microphones
Battery endurance Up to 55 hours with ANC active
Charging interface USB-C with fast charge capability
Total weight Approximately 0.45 kg
Wireless protocol Bluetooth 5.0, MyDyson app integration
Construction materials Aluminum body, microfiber cushions, CNC machined outer caps

Bag as Object Two

Porter’s contribution is a shoulder bag engineered specifically around headphone storage and deployment. The design is not a general purpose satchel with a headphone pocket added as an afterthought. The entire geometry responds to a single question: how does a commuter remove, wear, and store over-ear audio equipment with minimal friction? The construction involves 77 discrete components, each cut and stitched by hand in Japan.

The outer shell uses water-repellent nylon with abrasion-resistant weave, a material choice that protects against rain, scuffs, and the wear patterns of daily transit. Interior compartments accommodate the standard commuter loadout: phone, wallet, tablet, small camera, cables. Pockets are sized and positioned to prevent shifting during movement. The signature detail is the dedicated headphone loop integrated into the shoulder strap. When the headphones are not in use, they hang from this loop in a stable, accessible position at chest height. The strap itself employs Porter’s Carrying Equipment Strap mechanism, allowing one-handed length adjustment through a quick-pull system. This ergonomic decision accommodates different body types and carry positions without requiring two-handed manipulation.

Color story extends throughout the bag. The body is navy. The zipper tape is bright orange. Interior lining and webbing introduce green and khaki accents.

Every material surface echoes the headphone palette, creating a unified visual identity even when the two objects are separated. The bag was designed with the headphones’ 0.45 kg mass already calculated into its geometry, ensuring weight distribution remains balanced during movement.

System Integration

The value of this collaboration lies in the integrated ritual it enables. A commuter leaves home with headphones docked on the shoulder strap loop. The loop holds them securely against the bag body, eliminating swing and bounce during movement. On the platform, a single motion lifts the headphones from the loop to the ears and activates ANC. At the destination, the headphones return to the loop without opening the bag or searching for a case.

The strap adjustment system allows the bag to shift position for crowded trains or escalator navigation. The Porter logo on the headphone caps and the Dyson branding on the bag interior reinforce system identity through consistent placement and scale.

Design System Comparison

Design Element OnTrac Headphones Porter Shoulder Bag
Primary function High-fidelity audio with active noise cancellation optimized for commuting Compact daily carry satchel engineered around headphone storage and quick access
Material construction Aluminum frame, microfiber cushions, precision machined caps Water-repellent nylon, 77 hand-assembled components, reinforced stitching
Color language Navy headband and shells, green cushions, orange accent stitching Navy exterior, orange zipper tape, green webbing accents, khaki interior
Heritage reference MA 1 flight jacket palette adapted to audio hardware MA 1 flight jacket palette extended to bag construction
Signature feature Porter branded outer caps with co-branded engraving Integrated headphone loop on shoulder strap, one-pull length adjustment
System role Audio delivery and noise isolation during transit Storage, transport, and quick-access docking for headphones and daily essentials

Limited Edition Context

Production caps at 380 individually numbered sets. Each unit ships with a tech slice: a resin block containing frozen development components suspended like specimens. A steel aircraft-wire loop attaches this artifact to the bag. The tech slice serves no functional purpose. Its presence signals that this collaboration values process documentation as much as finished product. Pricing varies by region, with Japanese retail at ¥118,690, UK pricing at £649.99, and North American pricing in the $700 to $1,000 range depending on import and distribution variables.

This represents a significant premium over the standard OnTrac, which retails around $500. The delta purchases the Porter bag, the limited numbering, the tech slice, and the scarcity itself. Distribution is restricted to select Dyson and Porter retail locations in Japan and China, plus official online stores. The 380-unit cap ensures that most interested buyers will not acquire a set.

The collaboration positions itself as a design artifact rather than a mass-market commuter recommendation. This distinction matters. The limited production run is not a marketing tactic to generate urgency. It reflects the reality that hand-built Porter bags cannot scale beyond a certain output without compromising construction quality. The collaboration accepts that constraint rather than working around it.

The numbered tag and tech slice transform the set into a collector’s object, extending both companies’ internal prototype cultures outward to buyers.

Design Value and Trade-Offs

The integrated carry solves a genuine friction point in commuter life. Over-ear headphones are awkward to store and deploy in transit. The strap loop addresses this problem directly. Material quality on both objects meets expectations for premium products. The Porter bag’s hand construction and weather resistance exceed typical EDC pricing tiers. The 55-hour battery life and 40 dB ANC represent genuine engineering performance.

The trade-offs are equally visible. The headphones are heavy at 0.45 kg, heavier than many competing over-ears. This is a consequence of Dyson’s aluminum construction decisions. The premium pricing places this set beyond casual consideration. The 380-unit production run means that for most readers, this is an object to understand rather than acquire. Within the broader context of tech and fashion collaborations, this project signals a shift in approach. Most brand partnerships treat collaboration as a reskinning exercise: new colors, co-branded packaging, a press cycle. The Dyson and Porter set attempts something more structural. The bag exists because of the headphones. The strap loop exists because of the bag. The color palette exists because both objects needed to read as one. This is system design applied to the commute, not merchandise.

Closing Insight

Carrying sound functions as a design position in this collaboration, not as marketing language. Porter and Dyson asked a specific question: what would it mean to design a bag around the act of listening rather than the act of storing? The answer required rethinking strap ergonomics, loop placement, and access geometry. It required unifying two production cultures under a shared color language. It required limiting production to maintain the artifact status that justifies the premium.

Most products designed for commuting solve individual problems: block noise, carry belongings, protect against weather. This collaboration solves them together, as a system, with a coherence that most tech and fashion partnerships never attempt.

The project suggests a future where commuter accessories behave as a cohesive ecosystem, designed from the outset to interact seamlessly rather than coexist by accident. For the 380 people who acquire a set, the daily commute operates through a unified design language. For everyone else, the project demonstrates what becomes possible when two craft-driven houses apply system-level rigor to carrying sound.

The post Dyson x Porter OnTrac Limited Edition Redefines the Commuter Kit as a Unified Design System first appeared on Yanko Design.

Dyson OnTrac Headphones: A Comeback After Dyson Zone’s Air Purifier Headphone Flop?

Posted on by

When Dyson Zone headphones with a visor for beaming fresh air into your nose were released a couple of years ago, we were taken aback by the idea. Although the prospective buyers didn’t show much affinity towards the unconventional ANC cans costing $1,000, we knew Dyson was working under wraps to reclaim lost glory in the headphones segment. They were poised to take the heat to Sony 1000XM5, Bose QuietComfort Ultra, Apple AirPods Max, Bowers & Wilkins PX7, and Sennheiser Momentum 4 Wireless.

This time the UK-based consumer tech giant has come up with a more conventional pair of headphones that are ultra-customizable. Meet the Dyson OnTrac headphones that tout class-leading ANC performance akin to the QuietComfort Ultra and AirPods Max. Audio quality is also the USP just like B&W PX7 or Momentum 4 Wireless. Priced at the upper end of the consumer tech segment, the cans have enough meat to pack a punch.

Designer: Dyson

The color customization of the headphones makes them stand out from the crowd with more than 2,000 possible combinations of the interchangeable outer cap covers and ear cushions made out of ultra-soft microfiber material. This is on top of the 4 basic color options in different material choices including CNC Copper, CNC Aluminium and CNC Black Nickel. OnTrac will also come in a special Ceramic Cinnabar version draped in a painted finish with a ceramic feel.

The headphones have an eight-microphone system capable of 40 decibels of reduction in unwanted sound courtesy of the 384,000 sound sampling per second. Good sound quality is a priority for the creators of the headphones, hence, the OnTracs feature 40mm drivers to reproduce the frequencies as intended by the artist. The frequency range of 6Hz to 21,000Hz makes you feel the rumble of sub-bass without muffling things and the highs are crystal clear. The Bluetooth codecs supported include SBC, AAC and the newer LHDC version.

The superior performance of the ANC doesn’t take a toll on the battery as Dyson promises 55 hours of impressive backup with Active Noise Canceling turned on. A charge of half an hour will juice them up for around 9 hours of playback. The controls for toggling volume levels, track change and ANC on/off are done with a tactile joystick button on the outside of either cup. Comfort is also important so the multi-pivot gimbal arms ensure the right amount of clamping force to prevent any pressure on the ears.

The post Dyson OnTrac Headphones: A Comeback After Dyson Zone’s Air Purifier Headphone Flop? first appeared on Yanko Design.