Author Archives: Ida Torres

Enjoy sheets of water through your fingers in sculpture-like faucet from Kohler

Posted on by

There are some things that you use every day that serve a certain function and you don’t really care about what it looks like or how it’s made, as long as it does what it’s supposed to do. One of these things is the water faucet which you most likely use more than once a day (unless you’re stuck in bed and can’t get up). What if this simple piece of your life “exists beyond conventional expectations” and still does its job?

Designer: Samuel Ross for Kohler

The Formation 01 Faucet is a creation from Samuel Ross’ design studio SR_A for luxury bathroom and kitchen manufacturer Kohler. It doesn’t really look like your ordinary or even high end faucets look like. Rather, it was designed as a functional piece of sculpture that is still able to give you the water that you need when you want to use a faucet. The way it was designed is to give you a continuous sheet of water, whether you’re using it for cleaning or cooling down.

The faucet is made from an advanced composite material called Neolast, which is the proprietary material from Kohler. They were able to form it into that kind of shape since the material is able to offer “boundless form, unexpected texture, and rich, saturated colors”. It sports the color orange since it is the designer’s signature shade. Underneath the fauce is an embossed cast iron escutcheon plate to celebrate the collaboration between the brand and the designer.

The Formation 01 Faucet does look extraordinary and innovative, from the color to the seemingly-abstract shape. But what I really enjoy, at least from the product renders, is how the water comes out in a sheet, which looks and hopefully feels pretty cool (maybe literally even).

The post Enjoy sheets of water through your fingers in sculpture-like faucet from Kohler first appeared on Yanko Design.

Device concept lets you monitor and lessen personal carbon footprint

Posted on by

If you’re conscious about how we’ve been treating Mother Earth the past few years, decades, centuries, measuring carbon emissions is something that you’ve probably looked into. There are a lot of tips out there on how you can keep track of your own carbon footprint and how you can slowly lessen it. It may sometimes require a huge lifestyle change and we also need a visible tool to help us do this and see how we can help our environment recover.

Designer: YeEun Kim

The Toad House is a device that looks like a cross between an air purifier and a smart speaker but is actually something you can use to monitor how much carbon emission you’re using when you’re at home and make the necessary adjustments. It is inspired by a Korean children’s song that talks about building a new house from an old one which can be a metaphor in how we can repurpose wasted energy.

The product description can be a bit vague on how the device can actually measure your carbon emissions but it says the interface at the top of the house is where you can check how much you’re already using. This is probably connected to the app on your smartphone where you set targets and also see the values of the various appliances and gadgets in your house. It also says that the wasted power from your devices can be stored and then used for wireless charging later on.

This is still a concept for now but if it eventually becomes a product, it would be interesting to see if a gadget like this can really affect how you use energy. Eventually, there can also be studies if it indeed lessens carbon emissions when you have a visual reminder of how much you’re using and leaving in your environment. Probably what’s needed now though is more education on how people can measure their carbon footprints, at least in their personal use.

The post Device concept lets you monitor and lessen personal carbon footprint first appeared on Yanko Design.

Portable plug-and-play 3D printer lets you print without much complications

Posted on by

3D printing is something that is interesting and useful for a lot of industries although it’s still basically in the early stages. One thing that’s probably stopping people from embracing this technology is that it seems pretty complicated and not user-friendly. Most printers require a certain kind of technical knowledge so those who don’t have this are already ruled out. What if there was a printer that would do away with all that and let “ordinary” users enjoy the joys of 3D printing?

Designer: KOKONI

The KOKONI EC2 is one such printer which will let 3D printing enthusiasts use a plug-and-play kind of entry-level smart 3D printer. Despite its advanced features, it is still pretty accessible enough for children and newbies, not to mention pretty affordable. You don’t even need advanced software skills to be able to print the things you want to print. It has AI-generated design capabilities and there are also over 2000 designs to choose from (and they update it weekly so you’ll get more).

The portable 3D printer actually looks like a toy oven with its compact design and color options (apple green, orange, and white). It has a 720p camera so you will be able to see the printing process and even create time-lapse videos from there. You also get an upgraded printing speed so you’ll be able to print something in under 20 minutes if you’re using the simpler designs. You can connect the printer to the KOKONI 3D app so you don’t need a computer to be able to use it.

I never thought I would consider getting a 3D printer given the complicated nature of most of the machines available in the market. But this one that weighs just 3.2 kg and is 189 x 302 x 231 mm small is something you can consider if you’re looking to complete DIY projects for your home or work. Well, that is, if you have $349 to spare.

The post Portable plug-and-play 3D printer lets you print without much complications first appeared on Yanko Design.

Vinyl music system lets you have an aesthetic listening party

Posted on by

While we’re now used to listening to our favorite tunes on our streaming service of choice, there are times when we would still crave to listening on unadulterated and uncompressed formats, specifically on vinyl players. One of my dreams is to have a listening party with my fellow K-Pop stans and listening and dancing to tunes from vinyl records. But actually setting up a system can be intimidating for newbies, not to mention expensive.

Designer: Dum Audio

The Stereo System Bundle that Dum Audio is offering will remove some of that hassle of choosing what things should go into your vinyl record set up (although the expensive part is still there of course). It has “everything you need and nothing you don’t” in a sense that it has all the basics that you would need to listen to your records with an “immense and crystal clear sonic experience”. This includes the turntable itself, an amplifier, and a pair of passive speakers, with the option of adding a passive subwoofer in case you want more base.

The entire system has a real hardwood veneer with aluminum hardware so if that’s your aesthetic in your living room or bedroom, it should go well with the whole ambience. The turntable has an Ortofon 2M Red cartridge and an MDF flinth with real hardwood veneer and a custom aluminum tonearm. It plays at 33.3 and 45 RPM. The integrated amplifier has analog inputs and an output for the passive subwoofer that is coming soon. You can control the bass, mid, and treble and has a power output of 100 watts RMS per channel. The passive speakers has custom Dum Audio drivers and has a power handling of 100 watts RMS per speaker.

If you still want to listen to songs on your streaming service, the amplifier has Bluetooth 5.0 with aptX so you can still stream from your smartphone or computer. If you have around $2,000 to spend for a system, this is something you can consider if you don’t want the hassle of looking for individual components. It also looks pretty aesthetic so that can add to the joy of listening to your favorite vinyl records.

The post Vinyl music system lets you have an aesthetic listening party first appeared on Yanko Design.

Nike Alphafly 3 Proto lets you run a marathon comfortably and fashionably

Posted on by

I know a lot of people whose holiday gift wish list would be a pair of sneakers, specifically a pair of Nike sneakers. Those who are too old for Santa would probably post their dream sneaks on their social media in the hopes that one of their loved ones would grant their wish. If you’re planning to do a bit of long-distance running, this new pair from Nike is something you can dream about.

Designer: Nike

The Alphafly 3 Proto is created specifically for those who are looking for sneakers that can withstand two-hour marathons and beyond. It has actually been tested by actual marathoners like world record holder Kelvin Kiptum famed middle and long distance runner Sifan Hassan. Nike says these shoes are “fine-tuned for marathon speed” so you can challenge yourself to beat your personal records and if you’re into competitive running, to leave others in the dust.

These sneakers are special because of three kinds of innovative technologies that can power your run (or walk). You get two forefoot Air Zoom units together with the ZoomX foam so you get energized no matter how long you’ve been running. There is also a full-length carbon fiber plate which helps propel your stride. Lastly, you get the heel-to-toe ZoomX foam midsole so you’re still comfortably walking or running whether it’s mile 1 or mile 26.2.

The Alphafly 3 Proto is also the lightest in this line and has an Atomknit upper that will give your feet room to breathe and at the same time have better multidirectional containment. It also has notched laces and an integrated knit tongue with lofted padding. You will have to wait for the new year to get your hands on this pair though as it will only be available by January.

The post Nike Alphafly 3 Proto lets you run a marathon comfortably and fashionably first appeared on Yanko Design.

Enjoy camping in the great outdoors in comfort with off-grid camper trailer

Posted on by

There are different kinds of people who go camping. There are those that really want to rough it out in the middle of nature, away from the bare necessities that we’ve gotten used to every day. But there are also those that want to stay close to their creature comforts while still experiencing some semblance of the great outdoors. If you’re more of the latter, this Mad Max-looking vehicle may be the one for you.

Designer: Bruder

The Bruder EXP-8 is the flagship vehicle from the Australian adventure trailer manufacturer. If you want to experience an outdoor adventure, you can do so in the comfort of this off-grid camper trailer that is “designed and built for all seasons and environments”. You will be able to drive through the most uneven of terrains and the most extreme climactic conditions as it has 12 inches of suspension travel and three times more usable wheel travel than others in its category.

On the outside, it looks like something out of a Mad Max movie, but with a sleeker and sturdier look. Inside, it is spacious and has a pretty luxurious set up complete with a fully functional kitchen, a living room, bedroom, a bathroom that looks like those you can see in hotels, and gallery windows so you can enjoy a good view of the outdoors. It also has solar panels, a 20 KwH battery, and a 500W inverter so you can get enough power for four people inside the camper.

While it looks tough and heavy, they used lightweight construction for the Bruder EXP-8. It is also able to calibrate its height to fit different kinds of tow vehicles. It can even level out on sloping camp spots so you can enjoy the best of both worlds while camping out in luxury.

The post Enjoy camping in the great outdoors in comfort with off-grid camper trailer first appeared on Yanko Design.

Macintosh-inspired Wireless Charging Stand combines Nostalgia with MagSafe and Wireless Charging

Posted on by

For those of us who were already alive and aware when the original Macintosh made its bow on January 1984, seeing any vintage design that is inspired by this classic is always nostalgic. We’ve been seeing a resurgence of all kinds of vintage-inspired designs on more modern gadgets and devices to blend the old and the new. elago is one such brand that has been coming up with more nostalgic magsafe and old-school Mac inspired accessories to go together with your iPhones, AirPods, Apple Watch, etc. This latest one is sure to appeal to the classic Mac lovers.

Designer: elago

Click Here to Buy Now

The MagSafe MS M4 Charging Stand is a charging stand for your iPhone that brings back the classic retro design of the Macintosh. It also helps reduce clutter on your table when you need to juice up your smartphone and of course do it in nostalgic style. It is made from premium silicone so it should be able to protect your device from scratches and even the spot on the desk where you will be placing the charger. It also adds a grip to to the surface that it’s resting on and has ventilation holes so your device won’t overheat.

You will need to have your own MagSafe charger which will be attached to the charging stand which then allows you to attach your iPhone in place. As it’s charging, you will also be able to use it to take phone calls and do video calls as well. It is also compatible with the StandBy mode that turns your device into an ambient smart display if you’re already sporting iOS 17. It is compatible with the iPhone 12, 13, 14, and 15 series. If you’re not using the charging stand, it still looks cute sitting there on your table with the mini Macintosh design complete with the classic cursive “hello.” greeting.

The charging stand doesn’t have any other new additional feature aside from being a stand that charges your iPhone or a stand to hold your device if you’re using it for calls or video conferences. But if you’re looking for something cute and nostalgic, then it’s something that you’d want to add to your collection. And at just $28.99, it’s not that of an expensive addition.

Click Here to Buy Now

The post Macintosh-inspired Wireless Charging Stand combines Nostalgia with MagSafe and Wireless Charging first appeared on Yanko Design.

Solar electric minivan lets you power up in emergency situations

Posted on by

In the old days, the only function of vehicles was to transport people and goods to their desired location. But as technology evolves, we expect a lot more from them other than just a way to get from point A to point B. We also expect newer cars to be much more eco-friendly, hence the emergence of electric vehicles. Now, we’re seeing vehicles that are able to “contribute to society” in their own way by adding various functionalities aside from just moving.

Designer: HW Electro

Puzzle is a small commercial electric vehicle from HW Electro that may be the size of a light car or van but also has a lot of other functionalities built into it. It can become a mobile power source during emergencies with its AC power supply function and can also become a WiFi hotspot that anyone can connect to. It also has an emergency kit that can be used during emergency situations. The van also has solar panels on top to add to the power source. They plan to add even more functions eventually as the vehicle evolves.

The exterior of the vehicle has been streamlined so it’s easy to remove or add other components since they’re using the same panels. This way they are able to eliminate waste during production since things like the panel under the front light, the front edge of the roof, the left front door, and the right rear door are made from the same exterior panel. The interior has an almost cubic cargo space so you can use the full size of the van. There are also interior panels made into pinboards so you can turn the inside into more of a modular space which you can arrange according to your needs and preferences.

HW Electro released a dedicated app so you can connect electric vehicles like the Puzzle to users’ smartphones to keep track of various information like battery level, charging status, location, etc. If you plan to travel long distances and use your vehicle as your shelter and power source, this is a good eco-friendly and multi-function option for you.

The post Solar electric minivan lets you power up in emergency situations first appeared on Yanko Design.

Cork bike saddle amplifies the eco-friendly quotient of your ride

Posted on by

There was a huge increase in bicycles and all biking accessories during the pandemic as people tried to find alternative means of transportation. Now that we’re almost back to whatever normal is, bikers are still a huge segment of the transportation market for a lot of reasons. One of these is that it’s more eco-friendly that cars since it does not use any fuel. But there has also been an interest in making the bicycles themselves even more eco-friendly.

Designer: Frame Cycles

One new product that can make your bike more sustainable is the FR-1 Bike Saddle since it is made from reconstituted cork and grade 5 titanium. It was able to do away with the usual three plastic layers of the bike saddle and replace it with the single piece of cork. What’s more, this cork is able to have all the properties of those plastic layers: structural rigidity, foam comfort, and weather resistance.

According to Frame Cycles, they were able to create the first batch of these cork saddles by using a firm grade of reconstituted cork so it has the similar hardness to the usual leather bike saddle. This also means that you will have to spend at least two weeks for the cork saddle to break in and start to soften. They will eventually release variants with different grades of cork. The process of sourcing the materials from the cork trees is also less harmful as stripping the bark every 8-10 years boosts the carbon consumption 3-5 times.

Before the cork saddle gets to you, the components are harvested in Portugal and then molded when it reaches Glasgow, Scotland. This is also where the parts are treated with water-based lacquer and then integrated into the welded titanium substructure. Knowing this entire process, it will not surprise you that the FR-1 Bike Saddle is a bit expensive at around $130. But of course, it’s a small (expensive) price to pay if you want a more eco-friendly bike to accompany your sustainable lifestyle.

The post Cork bike saddle amplifies the eco-friendly quotient of your ride first appeared on Yanko Design.

Zippo Fire Starting Multi-Tool will you be your best friend for those camping nights

Posted on by

If you’ve ever gone camping, chances are you probably had to start a fire for your cooking or smores needs. As someone who has never have done this but have seen enough movies and TV shows where people struggle with it, I can only guess that it’s pretty challenging if you don’t have the right tools or if you actually don’t know how to do it. Fortunately for those who still have to do it manually, there are a lot of tools now (and YouTube).

Designer: Zippo

The Fire Starting Multi-Tool from Zippo should be able to do the job for you as its name says. It’s basically a Swiss knife type of tool that has everything you need to start a fire and do other outdoorsy things. It has a flint wheel ignition that should be able to spark that fire and then add shavings from the tinder grater that’s part of the tool. It also has a 420 high-carbon steel knife blade and a double cut saw blade that should let you cut through things like branches which you also need to kindle the fire.

You should be able to start up to 15 fires at 1 inch each or 12 fires at 3 cm each with what’s included in this tool , which includes 1 flint. It also comes with a fire paracord and bail with an attachment point. For non-fire things, there is a bottle opener and screwdriver so you can enjoy a bottle of beer once the fire has been started.

If you often go outdoors and start campfires and such, this is a handy tool for you to always have with you. Zippo is even offering a combo kit which includes other fire starting tools that you may need if you ned to have those smores while exchanging campfire stories.

The post Zippo Fire Starting Multi-Tool will you be your best friend for those camping nights first appeared on Yanko Design.