This Self-Moving Harry Potter Chessboard Stole The Show At IFA 2026 From Every AI Gadget


IFA in 2026 was wall to wall AI. Every fridge had an assistant, every vacuum had a personality, every booth rep used the word “intelligent” until it stopped meaning anything. I walked past maybe forty products that promised to think for me before I found the one thing on the entire floor that made me feel something, and it did not involve a single chatbot. It was a chess board, sculpted like a ruin, moving its own pieces across a glowing marble surface with nobody touching them. That board is GoChess Wizard Alive, Particula’s officially licensed Harry Potter set built with Warner Bros. for the film’s 25th anniversary, and it out-charmed every piece of “smart” hardware in the building.

Here is my petty little theory about consumer tech right now. We have gotten so good at building things that are useful that we forgot how to build things that are delightful, and those are not the same skill. GoChess solves that by hiding four robots under the surface, letting 32 stone pieces glide into position with zero visible mechanism, all while looking like something dug out of the Chamber itself. It ships as a limited run of 1,000 numbered boards at $999, the first batch sold out in 48 hours, and the second presale opens September 28. I did not review this like a gadget. I reviewed it the way you judge a magic trick, and it passed clean.

Designers: Particula x Warner Bros.

I zoomed in using a macro mode on my camera and the details were staggering. The pawns kneel with crossbows braced against a shoulder, heads bowed like they are waiting on orders. Knights rear up on horseback behind kite shields carved with a rosette pattern lifted straight from the film’s chamber sequence. The king stands wrapped in a crowned great helm, both hands folded over a sword pommel like a tomb effigy that got bored of lying down. This is medieval funerary sculpture cosplaying as a chess set, and it works because Particula resisted the easy move of just slapping Harry Potter branding on a generic Staunton set.

The playing surface is printed to look like veined marble rather than the flat two-tone grid every smart board defaults to, and the LED coaching rings glow up through that stone texture instead of sitting on top of it like a UI overlay. Blue rings show your legal moves, green flags the strongest option, and the whole system stays invisible until you actually need it. That restraint in the interface design is what sells the illusion. A cheaper execution would have turned this into a light-up toy. Particula built something that looks like a prop first and a gadget second.

The robotics trace back to Particula’s original 2023 GoChess, which used a patent-pending system of wheeled micro-robots under a translucent surface to shuttle magnetic pieces around. Wizard Alive runs the four-robot configuration from that lineup, the faster of the two setups, which is why a full board reset happens in seconds instead of a slow crawl. You can also just talk to it. Call out “knight to h3” the way Ron does in the film and the piece answers you, gliding into position with no hand involved. Standing at that booth, watching strangers do this to each other and burst out laughing, was the most fun I had at the entire show.

I walked into that convention center braced for smart fridges and AI-branded nonsense, and I walked out having relived being nine years old for about twenty minutes straight. That is the real achievement here, not the robotics or the licensing deal, but the fact that a chess set out-delighted an entire hall of companies trying much harder to impress me. If you want in, the second presale batch opens September 28 for 48 hours before it vanishes again, same as the first one did. Move fast. The pieces certainly will.

The post This Self-Moving Harry Potter Chessboard Stole The Show At IFA 2026 From Every AI Gadget first appeared on Yanko Design.

This CO2-powered cooling jacket could keep you comfortable in extreme heat without a battery

Most wearable cooling devices add more hardware to what you are already wearing. Hissy, developed by five designers as part of Samsung Design Membership, is different though. the concept puts a CO₂-powered cooling system inside a lightweight technical jacket, turning the garment itself into an air-delivery system.

The idea comes from a fairly simple problem. Portable fans can struggle when the surrounding air is already extremely hot, while battery-powered cooling systems bring their own compromises in weight, runtime, and heat management. Hissy replaces the usual fan-and-battery setup with a small CO₂ cartridge mounted at the wrist. When the cartridge is connected, high-pressure liquid carbon dioxide vaporizes inside the cooling hardware, producing airflow at around -30 Degree Celsius.

Designer: Dongheon Kang, Minseo Jung, Yuha Ko, Juhyeon Jeon, Woohi Park

What makes the jacket interesting, however, is what happens after the cold air is generated. Rather than dumping it into the garment and hoping it reaches the right places, Hissy routes it through a tubular Air Path built into the jacket. The path follows a spiral around the body, and the jacket is cut and stitched around this structure. Its shape also helps prevent the tube from sharply bending or kinking as the wearer moves.

Small perforations along the Air Path release the cold air at selected points. The designers determined their positioning and size using thermal mapping and heat-distribution tests, concentrating the airflow around areas where the body produces more heat. That explains the unusual construction of the jacket. The visible pattern isn’t simply there for visual effect; it traces the route the cooling system needs to take through the garment.

The CO₂ cartridge itself sits in a surprisingly neat docking system. Instead of being screwed into place, it attaches magnetically. Locking protrusions keep it from being pulled straight out while the system is operating, and rotating the cartridge changes the magnetic interaction so it can be released. An internal strap and sleeve zipper keep the hardware secure around the wrist, while a chest pocket provides somewhere to carry additional cartridges.

There is also an effort to make the disposable-looking cartridge system less wasteful. Hissy proposes using CO₂ captured from industrial processes as the cooling medium. Once a cartridge is empty, it can be collected, inspected, refilled, and returned to circulation. The designers see this as a way of keeping both the cartridge and the captured gas within a reuse cycle rather than treating them as single-use components.

For now, Hissy is a design concept rather than a product you can buy, but the team isn’t limiting the idea to jackets. Its proposed roadmap includes applying the same cooling technology to footwear, followed by products such as outdoor can coolers. A later version could even become a thermal-management system for machines working outdoors in high temperatures, including delivery robots and drones.

 

The post This CO2-powered cooling jacket could keep you comfortable in extreme heat without a battery first appeared on Yanko Design.