4 Ancient Japanese Crafts Reborn as Furniture You Can Actually Own

Posted on by

Japan has always had a complicated relationship with the new. On one hand, the country gave us bullet trains, robot hotels, and vending machines that sell everything from hot soup to umbrellas. On the other hand, it is also home to some of the world’s most painstakingly preserved craft traditions, techniques passed down through generations with almost stubborn devotion. What Kyoto-based designer Kenta Yoshizawa has done with his Red Craft collection, known in Japanese as Akai Kogei, is sit right in the middle of that tension and make it look beautiful.

The collection pulls from four traditional Japanese craft practices: bamboo fencing, kumihimo braided cord, washi paper, and urushi lacquer. These are not fringe techniques or obscure hobbies. Kumihimo dates back centuries and was once used to lace samurai armor. Urushi lacquer has been found on artifacts over 9,000 years old. Washi paper holds UNESCO Intangible Cultural Heritage status. Yoshizawa is not working with forgotten relics. He is working with the spine of Japanese material culture, and the result is a set of objects that feel both deeply rooted and genuinely fresh.

Designer: Kenta Yoshizawa

Each piece in the collection has a name that reflects its origins without being heavy-handed about it. The “n shelf” is a leaning shelf that takes the n-shaped profile of a Sodegaki, a traditional bamboo screen, and translates it into a freestanding furniture piece. The bamboo is shaped by hand using a gas burner to heat and bend the material, a process that is as physical and present as any studio practice can get. It is not mimicking the past. It is using the past as a blueprint, then deciding where to go from there.

The kumino piece works with braided cord in a way that makes you see kumihimo differently, less as decoration and more as structure with genuine weight and tension. The stickstick and usahako round out the series, incorporating washi paper and urushi lacquer into objects designed for everyday domestic use. All four pieces share the same vibrant red palette, which is both a visual signature and a quiet conceptual statement. Red in Japan carries layered meaning, connected to protection, vitality, and ceremony. Painting an entire collection in it is not an accident.

To pull this off with integrity, Yoshizawa worked with actual craft specialists, including Nagaoka Meichiku for the bamboo shelf and Shoen Kumihimo for the braided cord work. That collaboration matters more than it might seem. So much design that attempts to “revive” traditional craft ends up looking like a tribute act, aesthetically referencing a process without truly engaging with it. Having the masters involved, having people who have spent their lives learning these techniques actually make the objects, keeps Red Craft honest. The craft is not a veneer. It is the point.

My honest take is that Red Craft is exactly the kind of design we need more of right now. Not because it is nostalgic, but because it refuses to treat tradition as a museum piece. Yoshizawa’s collection asks what these techniques become when they are not preserved behind glass but allowed to do actual work in a contemporary home. The answer, as it turns out, is that they become furniture, lighting, storage. Objects you actually live with.

The things we choose to put in our homes say something about what we value, what we want near us. Choosing an object made with a centuries-old technique, shaped by hand, infused with craft that requires skill and time and human attention, is a different kind of choice than clicking “add to cart” on something designed, manufactured, and shipped in six weeks. That difference matters, even if we do not always articulate why.

Red Craft does not ask you to choose the past over the present. It asks whether there is a version of the present that makes room for both. Given how much of contemporary design feels disposable, the answer Yoshizawa offers feels like a small but genuine relief.

The post 4 Ancient Japanese Crafts Reborn as Furniture You Can Actually Own first appeared on Yanko Design.

The $171 Vest Worn by F1 Drivers Hit the World Cup

Posted on by

Heat has always been part of the game. Whether you’re a footballer running laps before a match, a Formula 1 driver crammed into a cockpit where temperatures can soar to 55-60°C, or a cyclist grinding through the Tour de France in July, managing your body temperature isn’t just about comfort. It’s about survival and, more specifically, performance.

That’s exactly what Dutch company Inuteq has been working on for years, quietly and without much fanfare, until now. Their PCM CoolOver, a cooling vest built on phase-change material technology, has found its way into one of the most high-profile collaborations in sportswear: the adidas CLIMACOOL System, officially unveiled for the FIFA World Cup 2026.

Designers: adidas x Inuteq

The way phase-change material works is genuinely clever. The vest contains PCM cells made from 100% biobased materials that absorb heat from the body as they gradually transition from solid to liquid state, keeping the surface at a consistent, controlled temperature. The 15°C version, the one widely used by athletes in sport and recovery, delivers up to 2.5 hours of constant cooling. No batteries, no electricity, no complicated mechanics. Just material science doing what it’s supposed to do.

I’ll admit that I didn’t expect to find myself genuinely excited about a vest. But when you look at what this collaboration actually represents, it shifts the conversation in interesting ways. Cooling technology has been operating in the background of elite sport for a long time. Ice towels, cold baths, fans on the sideline. These solutions work well enough, but they’re reactive. The PCM CoolOver feels like a proper design response to a problem that deserves one. It’s specific, engineered, wearable, and built on science rather than just intuition.

The adidas partnership started in motorsport. The CLIMACOOL System was originally developed to help Mercedes-AMG Petronas F1 Team drivers, including George Russell and Kimi Antonelli, cope with extreme cockpit heat. From there, it was adapted, tested, and refined alongside football clubs including Manchester United, Juventus, and Arsenal, before being made available to all adidas partner federations at the 2026 World Cup. That’s a journey from one of the most technically demanding environments in sport to one of the most globally watched. Not a bad trajectory for what is, at its core, a vest.

The numbers are worth sitting with for a moment. The system reduces core body temperature by up to 0.5°C and skin temperature by up to 13°C, with a complementary overshoe that brings foot temperature down by up to 2°C in minutes. The Spanish Football Federation was quick to point out how they’ve been using the vest before matches, after training, and at half-time to support player recovery and readiness. When a federation is publicly crediting a vest as part of their performance strategy, that tells you something.

What also deserves attention here is the sustainability angle. Inuteq’s PCM technology is USDA-certified 100% biobased and REACH compliant, which makes it one of the only cooling vests on the market that can make those claims. In a category that could easily lean on synthetic chemicals and disposable components, the fact that this product is also biodegradable and fabric-free, easy to clean and even sterilize, puts it in a different class. Good design shouldn’t have to compromise on this, and here, it doesn’t.

The PCM CoolOver comes in multiple temperature variants: 6.5°C, 15°C, 21°C, 24°C, and 29°C, each calibrated for different conditions and use cases, from elite athletic performance to industrial and medical settings. The range feels thoughtful, like a product family that was designed to solve real problems across real environments rather than chase a single use case.

Cooling as a design challenge might not carry the aesthetic glamour of, say, a new sneaker drop or a conceptual chair. But the PCM CoolOver is proof that genuinely functional design, the kind that solves a physical human problem with precision and care, is just as compelling, and arguably more necessary. The fact that it has quietly traveled from Dutch labs to Formula 1 cockpits to World Cup pitches says more about its value than any product launch ever could.

The post The $171 Vest Worn by F1 Drivers Hit the World Cup first appeared on Yanko Design.

Pixel Watch 5 arrives with incremental upgrades and Gemini Intelligence, but are you willing to pay more?

Posted on by

It’s that time of the year for Google to introduce its line-up of smartphones, smartwatches, and everything else that is destined for greatness. Samsung showed off last month what’s in their kitty, Apple’s going to reveal all the excitement next month, and bang in between is Pixel, right now. We already revealed our initial impressions of the Pixel 11 and the Pixel Tag, so now it’s the Pixel Watch 5 under the scanner.

The new wearable from the Google camp was making all the news in the weeks leading up to the final announcement, and most of those leaks have come true. Just like the Pixel Watch 4, the new wearable gets the same 360 domed Gorilla Glass 5 and more or less the same material composition from which the chassis is constructed. Last year’s Pixel Watch was good, and this one is an even better upgrade if you want to roll into the Google ecosystem.

Designer: Google

The watch designed for Gemini Intelligence gets a 320ppi AMOLED LTPO display supporting DCI-P3 color, but still has the same 3,000 nits brightness level as the predecessor. Under the hood, this wearable gets a clocked-up version of the Snapdragon W5 Gen 2 (claimed to be 12 percent faster than last year’s offering) mated to an upgraded 3GB RAM (from 2GB last year) and 64GB storage, which again is an upgrade from the 32GB on the Watch 4. However, I was expecting the Snapdragon Wear Elite (based on the 3nm manufacturing process) to grace the smartwatch, just like on the new Galaxy watches. That said, it isn’t a deal breaker in any way.

Just like with all the newer gadget offerings, this one improves on the health tracking and claims to bring accurate sleep tracking for loyal users. Other reliable features include the loss of pulse detection (called the Breathing emergency detection) and skin temperature tracking. SpO2 monitoring and ECG tracking also come standard with both the models.

Improvement of life features include recovery recommendations based on heart rate and sleep metrics, custom strength routines, and the Google Health Coach with custom workouts. According to Google, the route tracking accuracy on the Pixel Watch 5 has improved by almost 100 percent. Do look out for the Blood Pressure Trends and non-invasive Insulin Resistance Trends, which could be a deal-maker if you are looking for exactly those kinds of features in a smartwatch.

Quite predictably, Google is offering the IP68 and 5ATM-rated Pixel Watch 5 in 41mm and 45mm sizes, in both Wi-Fi-only and LTE variants. The 41mm version gets a 332mAh battery pack while the 45mm variants have a beefier 465mAh battery on board. Both are slight bump-ups from last year’s version for a few hours more of juice. The 41mm version lasts for around 30 hours, and the 45mm version for 40 hours on one full recharge. According to Google, the Quick charge dock adds 15 hours of runtime with just 15 minutes of charge.

Google is offering the 41mm model in Matte Black, Polished Silver, and Champagne Gold colors, whereas the bigger 45mm variant will be available in just the Champagne Gold hue. The prices on both the Pixel Watch 5 models and their variants have gone up slightly. The 41mm version for the Wi-Fi model costs $399, and the LTE variant goes for $499. The bigger 45mm version is priced at $29 for the Wi-Fi model, and the LTE version costs $529.

The post Pixel Watch 5 arrives with incremental upgrades and Gemini Intelligence, but are you willing to pay more? first appeared on Yanko Design.