Tag Archives: chairs

Artistic unibody chair concept is simple, stackable, and stunning

Posted on by

All chairs have a common, standard purpose, but there is no hard rule to follow when it comes to their design. As long as they offer a stable seating surface, and in most cases, some form of back support, they qualify as an acceptable piece of furniture, even if the actual experience can be a bit uncomfortable at times. It’s only by convention, for example, that most chairs have four legs or are made of different pieces, and some designs try to push the boundaries of what’s physically possible when it comes to the composition and form of chairs. This concept, for example, does away with the standard makeup of this kind of furniture and instead embraces a single flowing form that, surprisingly enough, works just as well in terms of practical use.

Designer: Deniz Aktay

Bending a single sheet of material, be it metal or plastic, into a less trivial form isn’t exactly easy, especially when you have to make sure that it is stable enough to sit on. You need not only balance but structural integrity as well since it will be something that humans expect to be safe to use. Some designs tend to overcomplicate things to meet those goals, but this chair concept goes in the completely opposite direction with its extreme simplicity.

Named after the last Greek alphabet, the Omega design concept simply takes a single folded sheet of material and bends it at the sides and back to create the two wide legs and backrest of the chair. There are no sharp angles in this design, giving the seamless form a smoother and more organic appearance. While it is aesthetically pleasing, it isn’t just an art piece, and at least based on the concept, it is just as functional as your stereotypical four-legged plastic chair.

In particular, the design of the Omega chair allows it to be stacked together, rather unexpected given its nontrivial shape. It doesn’t even take up more space than most stackable chairs, which makes the design practical for widespread production and use. It definitely offers an interesting alternative to common mass-produced designs as it offers both a compact shape as well as an attractive appearance.

On the surface, the Omega design also looks sturdy, with the legs angled inward to cover a bigger surface area than a normal straight edge. There might, however, be some concerns with the comfort of the seat itself, as the curved sides could make some slide off too easily. The backrest might also be too short for comfort, with the top edge digging into people’s backs when they lean backward. Nonetheless, it’s a beautiful and simple design that could be improved on for an even more comfortable and ergonomic experience.

The post Artistic unibody chair concept is simple, stackable, and stunning first appeared on Yanko Design.

UFO rocking chair combines a playful character with a striking, elegant design

Posted on by

Humanity has always had a fascination with the heavens, including the possibility of other intelligent life out there in the stars. Of course, there is no definite proof yet, but there is definitely no shortage of reports claiming to have seen UFOs or unidentified flying objects. Popular media have made the flying saucer the most iconic form of UFO, even though there’s probably no logical reason why they’d take that shape. Nonetheless, that form has inspired many an Earthly design, including this distinctive chair that looks like a lopsided UFO from afar and a majestic, almost futuristic throne up close.

Designer: Mavimatt

A rocking chair more often than not conjures up images of an antiquated wooden chair with arcs for legs that make it swing back and forth. Even among chairs, this design is already peculiar, mostly because it is far from the stable and unmoving concept that most people have for seating furniture, and this UFO-inspired treatment takes it to the next level, going beyond the stars, figuratively speaking. Beyond the initial shock factor, however, the design carries an air of class that will actually surprise you when you sit on it for the first time and discover, to your delight, that it can actually rock back and forth or even spin on its bottom.

The bowl-shaped exterior of this unusual rocking chair isn’t exactly a perfect curve, which allows the form to move without tipping over. Viewed from the side, it looks like a UFO that is either in sharp descent or has already crashed on the ground, denting its front and causing the rear to stick up and out. Made from fiberglass or carbon fiber, the structure of the chair is as strong as you’d expect from a spacecraft, or at least a piece of furniture inspired by one.

Viewed from the front, however, the chair looks less alien and more regal, almost like a throne from some futuristic civilization. There are no formal armrests for the chair, but the inner seat foam’s shape and material easily adapt to the body of the person, giving proper and comfortable support all the time. The radiating design of the seat puts the person right in the middle and emphasizes their presence, making them the visual center of the composition. Italian primofiore leather or fine fabrics are used for the upholstery, giving the chair a luxurious appearance and texture truly fit for monarchs or alien overlords.

Rather than simply sticking to the stereotypical appearance of a UFO, which would have meant glossy metal textures and colors, this UFO rocking chair opens the possibility of a wide number of designs, turning the shell of the chair into a canvas for display art, characters, or even the nighttime sky. Whether you associate it with a flying saucer or not, this Unidentified Furniture Object will surely capture anyone’s attention with its otherworldly beauty and give them the experience of their lives, sitting on a majestic chair that moves as if it were floating on air.

The post UFO rocking chair combines a playful character with a striking, elegant design first appeared on Yanko Design.

UFO rocking chair combines a playful character with a striking, elegant design

Posted on by

Humanity has always had a fascination with the heavens, including the possibility of other intelligent life out there in the stars. Of course, there is no definite proof yet, but there is definitely no shortage of reports claiming to have seen UFOs or unidentified flying objects. Popular media have made the flying saucer the most iconic form of UFO, even though there’s probably no logical reason why they’d take that shape. Nonetheless, that form has inspired many an Earthly design, including this distinctive chair that looks like a lopsided UFO from afar and a majestic, almost futuristic throne up close.

Designer: Mavimatt

A rocking chair more often than not conjures up images of an antiquated wooden chair with arcs for legs that make it swing back and forth. Even among chairs, this design is already peculiar, mostly because it is far from the stable and unmoving concept that most people have for seating furniture, and this UFO-inspired treatment takes it to the next level, going beyond the stars, figuratively speaking. Beyond the initial shock factor, however, the design carries an air of class that will actually surprise you when you sit on it for the first time and discover, to your delight, that it can actually rock back and forth or even spin on its bottom.

The bowl-shaped exterior of this unusual rocking chair isn’t exactly a perfect curve, which allows the form to move without tipping over. Viewed from the side, it looks like a UFO that is either in sharp descent or has already crashed on the ground, denting its front and causing the rear to stick up and out. Made from fiberglass or carbon fiber, the structure of the chair is as strong as you’d expect from a spacecraft, or at least a piece of furniture inspired by one.

Viewed from the front, however, the chair looks less alien and more regal, almost like a throne from some futuristic civilization. There are no formal armrests for the chair, but the inner seat foam’s shape and material easily adapt to the body of the person, giving proper and comfortable support all the time. The radiating design of the seat puts the person right in the middle and emphasizes their presence, making them the visual center of the composition. Italian primofiore leather or fine fabrics are used for the upholstery, giving the chair a luxurious appearance and texture truly fit for monarchs or alien overlords.

Rather than simply sticking to the stereotypical appearance of a UFO, which would have meant glossy metal textures and colors, this UFO rocking chair opens the possibility of a wide number of designs, turning the shell of the chair into a canvas for display art, characters, or even the nighttime sky. Whether you associate it with a flying saucer or not, this Unidentified Furniture Object will surely capture anyone’s attention with its otherworldly beauty and give them the experience of their lives, sitting on a majestic chair that moves as if it were floating on air.

The post UFO rocking chair combines a playful character with a striking, elegant design first appeared on Yanko Design.

Scorpion-like chair is a computer cockpit made for immersive, lazy gaming

Posted on by

When speaking of computer chairs, you probably first think of overgrown office chairs with a tall back and plenty of padding. While that is indeed the most common design, there are some that take the idea to the extreme, creating what is better described as a cockpit rather than a chair. These often include not only a space to hide the desktop computer from view but also a way to mount not just one but multiple monitors as well. It’s an all-in-one battle station for gamers and computer users who want all their equipment in a single basket. But while that concept in itself is already unconventional, this rather peculiar design really pushes the envelope by embracing the form that immediately comes to mind when looking at these computer gaming “thrones”: a deadly metal scorpion.

Designer: Cluvens

Truth be told, we may have caught a glimpse of chairs with embedded computers and built-in monitors from sci-fi shows, but those have mostly remained the stuff of fiction and stage props until recently. There have been a few new designs surfacing lately, including from giant brands like Acer, and while some of these gaming pods or cockpits try to aim for a similarly futuristic aesthetic, the SK Scorpion puts a different twist on the idea. Instead of a piece of furniture, this over-the-top chair looks more like a sleek robotic insect designed to keep you within its grasp and keep distractions away.

The scorpion motif isn’t just for show, however. Just like the segmented “tail” of the scorpion, the chair’s back and top arch can actually move with a little flexibility, reclining the backrest down to an almost flat angle and moving the screens away for a more restful position. Instead of claws, the scorpion’s arms can swivel in and out, providing not only a place to put things but also some degree of customization for what is practically your small workspace. That said, the chair’s legs don’t inspire too much confidence and is one aspect of the design that tried to be too realistic without being practical.

As far as computer cockpits go, however, the functionality that the SK Scorpion provides isn’t exactly extraordinary. It can support up to three 29-inch monitors placed side-by-side, or more depending on your creativity, creating an immersive view that’s almost in your face. You sadly need to put a separate tray on top of the two arms for the keyboard and mouse, and other things you might need for play and even work, though there are accessories available for holding your cup and hanging your headset. There are no built-in lights as well, so you’ll have to make provisions for that on your own.

That feature list looks a bit sparse until you consider the $3,400 price tag, a mere fraction of what fully featured computer cockpits cost. The menacing scorpion design probably won’t appeal to all gamers, and its novelty will quickly wear off. At least its ability to almost like completely flat, providing gamers with a convenient though probably uncomfortable bed to take power naps, is admittedly intriguing. Then again, these designs are really meant more for hardcore gamers, those who don’t mind isolating themselves in a bubble, at least when they’re gaming.

The post Scorpion-like chair is a computer cockpit made for immersive, lazy gaming first appeared on Yanko Design.

Wobbling rocking chair adds a playful twist to an everyday piece of furniture

Posted on by

We expect chairs to be stable, otherwise, we will never have the confidence or even the courage to take a seat on them. There are seats that are designed to move, though, from the wheels on office chairs to the rocking motion of a rocking chair, swing, or hammock. But what if the instability is actually an intentional part of the design, generating not fear but a sense of thrill and even playfulness? That’s the kind of experience that this odd-looking chair concept tries to offer, with a design that makes it look like a cross between a spacecraft seat and a child’s toy top. It turns out, it even moves like one as well!

Designer: Ellie Kim

A wobbling chair is probably the last thing you’d want to rest your body on, but if you’re actually looking for a more engaging and dynamic experience, this almost spherical seat is probably something you’d want to try out. After all, no one sits on a swing to relax but to actually be pumped up, enjoy, and maybe even trigger one’s creativity and imagination. At the same time, however, it has to be not only comfortable but also reassuring, as you don’t want your wobbling experience to be your last.

Designing a chair that rocks in all directions isn’t easy, even after you get the idea to use a concave base. You have to make sure you don’t completely tip over to any side, which is what a lip or ridge around the base is for. You’ll also have to come up with a design for the rest of the chair that not only provides support but also properly conveys the design’s more dynamic nature.

1

1

Thus, a circular chair is born with fins extruding from the middle like spokes on a wheel. The chair looks more like a turbine than a piece of furniture, but the design of each part is by no means based on whimsy. The top fins better cradle the seat and integrate it with the circular bottom half, while the bottom fins actually support the forces that the ridge will encounter with its rocking motion. Plus, it looks a lot more interesting, and its radial design immediately conveys the idea that it can move in almost any direction. As a bonus, the structure of the base and the ridge make it look like the chair is floating, adding to its sci-fi identity.

The end result is a chair that wobbles with pride and confidence, allowing the person on top to experience childlike play in every movement. It’s not going to replace any office or home chair, and it’s hardly an ergonomic design. But no one’s going to blame you for having a bit of fun rocking and spinning around on a chair that’s clearly designed to help you enjoy the lighter moments in life.

The post Wobbling rocking chair adds a playful twist to an everyday piece of furniture first appeared on Yanko Design.

Bowl-shaped chair concept offers geometric beauty at the expense of ergonomics

Posted on by

Just like a table, the most basic requirements for a chair are quite simple. It needs to be strong and stable enough to actually sit on, but comfort and convenience seem to be more open to interpretation than any other design element. Some brutalist designs look a little painful to sit on, meeting only the bare minimum of a chair, while others let your body literally sink inside its plushy cushions and make it difficult to pull yourself out quickly. And then there are designs like this concept that espouse simplicity and minimalism to convey a sense of beauty, but the end result, while visually successful, also raises concerns about its actual usefulness and comfort.

Designer: Mauricio Coelho

A chair isn’t a simple form that can be expressed in a single shape. After all, there are a few interconnecting planes needed to give it legs and an actual seat. A backrest is common but not obligatory, and armrests are even more optional. The Oco chair concept comes close to that simplicity of form while still providing a visually interesting piece, and it accomplishes that by employing a shape you wouldn’t always associate with a chair.

Bowl-shaped chairs are uncommon probably for a reason. A hollow half-sphere might not be the most comfortable thing to sit in unless you fill that space with cushions like what the Oco chair does. With extremely thin planes for legs, the bowl almost looks like it’s floating in mid-air. Made using carbon steel and fiberglass, the chair brings structural stability while also providing some subtle material details, like the wood-like grains of the spherical body.

But while it is indeed a sight to behold, closer inspection might make you rethink the comfort it promises. The thick cushions do look plus, but they might not provide enough support for the person’s back. Or at the very least the back cushion doesn’t have enough height to support someone leaning back, forcing them to sit upright without proper support, straining their body over time.

The bowl’s edges are also left exposed, which could scratch, cut, or press on a person’s skin, especially on the back of the legs and forearms. A few slight modifications, like lining the edges with soft fabric or changing the angle of the bowl could help improve the ergonomics of the design without ruining the simple geometric beauty that this concept wishes to convey.

The post Bowl-shaped chair concept offers geometric beauty at the expense of ergonomics first appeared on Yanko Design.

IKEA reveals gaming furniture collection that blends perfectly with modern interiors

Posted on by

There’s something about gamers that reflects in their overall persona and living space. You can walk into a home and instantly tell it’s a gamer’s den. IKEA wants to condition this perception by making a gamer’s living space more accommodating and comfortable for their non-gaming family members or close pals. Taking a detour from the usual dark-themed setups, the BRÄNNBOLL collection of gaming furniture fuses the best of both worlds.

This subtle collection of 20 versatile items makes even more sense as gaming-themed interiors or furniture items are draped in dark-colored hues. Even IKEA’s previous gaming-themed ROG collection was following the norm. This time around the Swedish multinational wants to concentrate more on the simplistic color schemes that are relevant even when you are not gaming, or when other members of the family are around. According to IKEA, the colors used in this collection are inspired by athleisure and street sports. They’ve balanced these hues with neutral and bright colors, so that they easily mix with the modern home interior design.

Designer: IKEA

According to Ikea product design developer Philip Dilé, the collection is about “making it simple for people to create spaces that adapt to gaming, living, and everything in between.” Coming on to the new collection, there is a desk, chairs, storage solutions and accessories that’ll not only appeal to gamers, but also normal users. A deeper insight into the collection reveals a focus on seating. There’s a fold-out armchair that converts into a lounge for playing intense Battle Royale titles, a rocking-style chair for relaxed gaming in utmost comfort, and an inflatable donut chair having a footstool for casual arcade games.

The most luring item in this collection for me is the gaming station that folds away to resemble a contemporary cupboard. It’s like a hidden portal to your gaming island, only revealed when you are in the mood for some serious gaming on your PC or gaming console. The unit includes a foldable tabletop, cable management system, cleverly incorporated PC tower storage, side table that doubles as a storage box and shelves. IKEA has included textile accessories including a mousepad, a throw and a rug to make your PC gaming a satisfying experience every time you open the cabinet doors.

The collection comes with a rollable side table with pegboard customizations to keep your handheld device, gadgets controllers, headphones and of course popcorn basket. Other than this, BRÄNNBOLL collection has the option to pick up wall-mounted display shelves to show off your collectibles and merchandise. There’s no word about the pricing or availability of the collection, but it is expected to be slated to be released in September this year. We should have more information coming in the months leading up to the release, and we are already excited.

The post IKEA reveals gaming furniture collection that blends perfectly with modern interiors first appeared on Yanko Design.

Sculptural chair design pays homage to a century-old wooden classic

Posted on by

Designs come and go, but some manage to become icons in their field. There are quite a few such designs in the larger furniture market, especially in the categories of tables and chairs. More than a century ago, a particular wooden design shattered expectations and became the precursor of mass-produced chairs for years, even decades, to come. It has since then inspired many product designers not only to follow in this chair’s footsteps but also to improve on it or even reimagine it with modern techniques and sensibilities. One such ode turns what was primarily a utilitarian design into an art object, exaggerating the structure and form that gave the No. 14 Chair its identity.

Designer: Jiri Krejcirik

Wooden chairs have, of course, been around for centuries, but most of them were often made with elaborate hand-carved designs that didn’t scale well for mass production. In 1859, the Thonet company revolutionized the furniture industry with the No. 14 Chair, or simply the Chair 14, which could indeed be put through a pipeline but still looked elegant in its simplicity. Its most characteristic design was the steam-bent wooden rods that formed the chair’s back, legs, and support.

More than 160 years after its birth, a new design breathes new life into that classic chair and dials it up to eleven. But rather than modernizing the original design, “Ode to Chair 14” reinterprets it from a different angle, one that puts form and aesthetics on a pedestal. While the original No. 14 adopted bent wood to give a mass-produced design more style and elegance, this particular rendition turns that design element into an art form, transforming the chair from a piece of furniture into an art object.

The Ode to Chair 14’s base is similar to the original, with a circular seat supported by four curved legs joined by a ring midway down their length. Where it differs, however, is the backrest, where what would have been a simple arching curve almost spirals out of control and loops repeatedly until it forms a row of intersecting rings. It gives the chair a character that is both eccentric and regal at the same time.

Despite its glossy blue hue, the chair is still made from bentwood beech wood just like the original design. In a way, it demonstrates how production processes have advanced to the point of making even such complex shapes possible. At the same time, however, it retains the same structural simplicity as the first Chair 14, a vision that paved the way for a new breed of chairs for decades to come.

The post Sculptural chair design pays homage to a century-old wooden classic first appeared on Yanko Design.

Sustainable office chair uses paper-like material made from wood by-products

Posted on by

Sustainable furniture and designs are thankfully becoming more common, but the “sustainable” label can actually be applied to different things. They can be made from recycled materials like metal or PCR plastics, or they can be made from new but biodegradable materials like wood, cork, and paper. While both kinds are good, they don’t always address the accumulating material waste that comes from the production of these objects, even the bits and pieces of wood that get left on the cutting room floor and then thrown out. Giving a new purpose to these by-products is another sustainable practice, one that is being applied to a beautifully minimalist office chair that’s made from dozens of sheets of paper.

Designer: Arper

Of course, it’s not literally made from paper, which would be too soft for a chair no matter how many sheets you stack, especially for a sleek and slender seat based on Arper’s iconic Catifa 53. Instead, it uses PaperShell from a Swedish startup of the same name, a material that almost poetically transforms paper, which comes from wood, back to a wood-like material that offers rigidity, stability, and, more importantly, beauty. In a nutshell, it uses both wood by-products like sawdust and chips as well as waste wood like fallen branches in forests to create a new paper-like material that can be used in place of wood, plastic, or fiber composites.

That’s the case with the Catifa Carta, which compresses dozens of these sheets into a composite that’s then bent and formed into an elegant chair with a gentle slope sitting on top of thin yet sturdy metal legs. Unlike its older sibling, this more sustainable version of the chair leaves the seat in its original, unpainted glory. That means you can see the natural imperfections of the PaperShell material, giving each chair a unique character. It’s pretty much the same as the highly prized grains in wood that give designs their natural charm.

What’s even more special about the chair is that even the end of its life has a story to tell. PaperShell can be recycled to produce new and different products, but it can also be turned into biochar to nourish the Earth. The material itself sequesters carbon dioxide which can be used to enrich soil. It’s a truly circular life cycle that starts and ends with the Earth. Appropriately, Arper has made the Catifa Carta easy to disassemble to make this process even easier.

Of course, the chair isn’t just a thing of beauty inside and out, it’s also a functional piece of furniture. Though some might have concerns about the ergonomics of using such a chair for long periods at work, it’s still a well-designed seat that makes you feel good not only about sitting on it but also about the exciting journey that this wood-like material has made since its birth from a seed.

The post Sustainable office chair uses paper-like material made from wood by-products first appeared on Yanko Design.

Sustainable 3D printed chair needs no glue or screws to connect its pieces

Posted on by

Flat-packed products like tables and chairs have definitely changed the furniture design landscape and altered consumers’ tastes. But while these designs do make it easy to store, transport, and sometimes assemble pieces of furniture, they often also end up being bland in the name of minimalism, not to mention tedious and cumbersome to repair or dispose of, despite the supposed ease of assembly. Thanks to new manufacturing techniques and technologies, especially 3D printing, there are now alternative methods and designs possible, including a beautiful chair that’s not only made from sustainable materials but is trivial to assemble and disassemble because it doesn’t even use screws or adhesives.

Designer: Eva Dugintseva

3D printing has definitely come a long way from the flimsy plastic materials that they started out with. We can now print objects using a variety of materials, including metal, chocolate, and soon, even wood. It’s even possible to use recycled PS (polystyrene) plastic, which helps reduce the negative impact of mass-produced plastic chairs. That alone already makes the Som Chair concept notable, but that isn’t the only trick it knows, not by a long shot.

Thanks to 3D printing, it was possible to experiment with and use shapes that would normally be costly to pull off on a mass production line. In this case, the chair is made from two separate bent shapes with ridged surfaces that make them look like dozens of plastic tubes stuck to one another. The main structure of the chair has a small gap for the smaller piece to slide into, forming the three legs of the chair. Instead of using glue or screws, this simple mechanism, along with physics, give the chair its stability.

1

This means that the Som Chair isn’t just easy to assemble, it’s also easy to take apart if you need to move it or even dispose of it. It might be possible to break down and recycle the plastic to make other objects, making it a little bit more sustainable, despite being made of plastic. You can also mix and match designs or replace only parts that are broken, giving the design more longevity as well.

Granted, this design won’t be as flat as a flat-packed chair, but you can package two of these together in a single box. Being 3D printed, there’s also more leeway in possible designs, giving this asymmetrical Memphis Milano chair more personality than your common minimalist yet plain flat-packed variety.

The post Sustainable 3D printed chair needs no glue or screws to connect its pieces first appeared on Yanko Design.