Author Archives: Ida Torres

Former oil refinery will be turned into renewal energy park

Posted on by

We’re seeing a lot of recreational places like amusement parks, public spaces, museums, etc that are looking for ways to use renewable sources of energy and to be more eco-friendly. There is also a slowly growing call to turn places that used to be major pollutants into something that can benefit mother nature as well as become places that are useful for the general public. One such place in Italy may soon be turned into a clean energy park in order to reconnect this area with the city and its neighbouring areas.

Designer: Carlo Ratti Associati (CRA)

What used to be an oil refinery in Trieste, Italy may soon become a renewal energy park and become part of a 365,000 square meter reclaimed seafront park that will be open to the public. The six former oil reservoirs in the area will be converted into tanks with water batteries and will be used to power the needs of the park. The tanks are 15 meters tall and have a capacity of 110,000 cubic meters and can turn what was once an inaccessible area into a useful public space.

The tanks will be used to store power by having seawater pumped into them and turning them into potential energy. When the power is actually needed, the stored seawater will then be turned into hydroelectric energy and consequently, they will be pumping water back into the sea. The energy needed for this whole “pumped hydroelectric” plant process uses agrivoltaics or dual-use solar panels. The elevated photovoltaic panels will be located around the urban park.

Aside from the fact that it will turn a former pollutant into an environmentally-friendly place, it will also bring Trieste into a closer relationship with the neighboring municipality of Muggia. There are other spaces like green areas, urban farms, and even an Innovation Park with a biotech research facility included inside. Hopefully we’ll see more projects like this in various cities so they can become more sustainable in the future.

The post Former oil refinery will be turned into renewal energy park first appeared on Yanko Design.

Minimalist water dispenser concept sits on your desk or table for easy access

Posted on by

Water dispensers are essential and well, indespensable, for any office or even homes (if you don’t have a water filtering system). But a lot of times, these dispensers are just functional and a clunky fixture in our kitchens or pantries. We don’t really look for a pretty or well-designed one since we just need it to give us clean water to drink. One challenge though is that you have to walk to and from it several times a day and that those water jugs are pretty hard to replace or refill.

Designer: Lee Yi Chung for Square Design Works

The Metapure Desktop Water Dispenser is a concept for a well-designed dispenser that can actually be stored on your desk, dining table, or your meeting table. It looks like a combination of a coffee maker and a printer’s ink refilling system. The machine itself is minimalist looking and with various controls built in so you can adjust the temperature so the water can fit in with your needs, whether you want it cold or hot or anything in between.

The refilling of water dispensers can sometimes be challenging so for this concept, they thought of something that would be pretty easy and can be done by anyone. You can just put the water inside the device (similar to some coffee makers and coffee capsule machines) and then there is a filter box placed inside. The filters look like those ink cartridges that you use for printers so we assume that taking them out and replacing them is also pretty easy.

If you’re using different kinds of cups and bottles, you will also be able to adjust the tray for these different accessories so there will be no water splashing. As a concept, this one is pretty interesting and is also good looking so you won’t need to hide it in the pantry. As someone who struggles with water dispensers, this is something I will be interested in if it eventually gets made into an actual product.

The post Minimalist water dispenser concept sits on your desk or table for easy access first appeared on Yanko Design.

Electric inversion table concept makes back therapy more comfortable (and pretty)

Posted on by

If you’ve never seen an inversion table before, you might be shocked when you walk into a room and you see someone lying upside down on this table. It brings some Silence of the Lambs vibes with Hannibal Lecter strapped into a bed, only this table is upside down. But it’s actually a thing that people with back problems do alongside other therapies to treat their back problems without having to resort to surgery. But most of the ones in the market don’t look very comfortable and may even be difficult to operate on your own.

Designer: Eui Ju Lee

This concept for an electric inversion table for Lime, a company that manufactures healthcare equipment, aims to solve those issues. Aside from looking clunky, most of these tables look like they belong in a hospital or a public gym and not your living room. The designer did use exercise equipment as basis for how such a table can fit in your environment but the renders show a much more homey looking device that can rotate in 180 angles to help your back issues.

They also tried to solve some issues that users had with operating inversion tables on their own. The handle is normally attached to the motor but is a bit hard to reach when you’re lying on the table. But with this concept, they put it in a place where it’s easy to reach and turn the inversion table to whatever angle is comfortable and useful for you. And since you’ll be lying on it for a few minutes, it should be pretty comfortable. The backrest is wide enough to make you feel stable and the soft square plate shape is the core visual as shown in the renders.

Compared to existing inversion tables, this one will look at home in your living room and your bedroom as it can blend with the other pieces of furniture. The pastel colors and the shapes of the various parts in the renders also adds to the comfort level of the user. In theory, it should work so the next challenge will be to see if this design, as well as the principles like ankle fixation and rotation can be applied.

The post Electric inversion table concept makes back therapy more comfortable (and pretty) first appeared on Yanko Design.

Bibi Bazz collection uses upcycled trainers for eco-friendly, fashionable bags

Posted on by

I personally know some people who go through sneakers and trainers like they go through toilet paper. Okay that maybe an exaggeration but there are a lot of collectors and wearers out there who do spend a lot on this kind of footwear and dispose of their old ones in a not so sustainable manner. So when we see designers and brands that recycle or upcycle these things as part of sustainable fashion, we pay attention and if we can afford it, we support them. If you also like owning limited edition pieces, then this new collection may be something you’d like to add to your closet.

Designer: Bibi Bazz

Bibi Bazz is a brand that focuses on upcycling and their Genesis Collection brings handcrafted bags made from damaged or deadstock trainers. This is just the first drop in their collection and is made up of limited edition shoulder bags and crossbody styles that can make you look like an eco-friendly rockstar. Aside from the different colors and textures, these bags also come with denim shoulder straps for a chic look. They also have interior pouches if you need to secure some small items.

The Fresh Start Trainer cross body bag uses deadstock Puma trainers in white and black colors. The Emerge Trainer Bag is a shoulder bag using a blue base with pink details and a denim strap as well. If you want something with bolder colors, the Rebirth Trainer is a crossbody bag with blue and neon orange hues with white accents. Meanwhile, the Revive Trainer is a crossbody bag with a red base and black patterns. If you’re more adventurous in your color palette, you can get the Renewal Trainer bag with its mix of neon lime, black, and green colors or the Pioneer Trainer Bag with its neon orange, pink, and yellow hues.

The bags from the Genesis Collection has a price range of £70-100. They’re in fact the first items available for the launch of Bibi Bazz’ online store. Even though the model on their website is a woman, the bags “transcend gender” and are meant to not only be eco-friendly but also inclusive. Since there are only limited items available, you might want to buy your upcycled trainer bags now.

The post Bibi Bazz collection uses upcycled trainers for eco-friendly, fashionable bags first appeared on Yanko Design.

Edible AirPods-looking earbuds are (expensive) fanciful candy

Posted on by

We see a lot of Airpod dupes out there in the market that are not as expensive and therefore may also not last as long as the originals. I’ve heard of some people who keep getting these non-authentic earbuds that look the same as Apple’s original because either they stop working properly or they keep losing them. And with the way that a lot of these earbuds are made, it’s not surprising that people keep losing them. What if there are AirPods though that are meant to be lost….into your mouth?

Designer: MSCHF

The Brooklyn-based art collective called MSCHF, known for their unserious and sometimes prank-ish products, have come up with their own take on the AirPods. But instead of giving you music, this may very well give you a toothache. That’s because their Candy AirPods are just exactly what the name says. They are edible earbuds that don’t have any other function except to be consumed. Well, unless, you want to keep them around for a long time even though they can’t let you listen to your favorite songs or podcasts.

The AirPods-looking candy come in a box just like the actual AirPods. They really do look like the earbuds as they are “ergonomically fitted to your ears” even though they’re not meant to be actually be put into your ears. The edible earbuds are made from isomalt, water, food coloring, and natural and artificial flavors and only contain 10 calories per container. If you have any allergies, you shouldn’t worry as they are GMO-free, fat-free, and allergen-free. They’re even manufactured in a nut-free facility so you can be sure you won’t get an allergy attack if you eat them.

Right now, it looks like they’re already sold out on the MSCHF website and we don’t know if they will still be restocking. But in case they will, it will cost you $50 which is a pretty steep price for two pieces of candy. They also can’t ship outside of Continental America since it’s not meant to travel far.

The post Edible AirPods-looking earbuds are (expensive) fanciful candy first appeared on Yanko Design.

Monocycle robot with legs may be last-mile delivery helper in the future

Posted on by

When we think of robots, more of then than not, we think of them in their humanoid design or at the very least in a dog-like form. But if you’re really experimenting with this kind of technology, you can get inspired from sci-fi and futuristic movies or TV shows. You can even be inspired by something “old” that can be adapted into a high-tech design. I’m fine with more experimental kinds of robots as long as they don’t overthrow the human race.

Designer: Joohyung Kim

A professor from the Electrical & Computer Engineering department at the University of Illinois Urbana-Champaign has come up with a robot that is inspired by the monocycle and some of those fast-moving circular robots you see in sci-fi films. The Ringbot is basically a monocycle robot that has two legs inside of it that looks like someone lying inside a ring and pedaling away. While there have been wheel-leg designs previously, this is the first one that was probably inspired by monocycles and General Grievous from Star Wars’ Clone Wars series.

The large wheel is the frame of the robot itself while the legs actually help the robot to balance itself and avoid toppling over. There are actually two indepent driving modules inside of it and each one controls its velocity so it can track a desired orientation. It can go around with the legs in the air steering and balancing it. When it does fall down, the legs will enable it to stand back up. It is also able to move and turn when stuck in tight spaces. It is able to make full rotations inside the wheel and drive it up to 5km/hour.

For now the Ringbot seems to just be something they are experimenting with. But in the future, they are looking at this robot to do autonomous last-mile deliveries in congested environments. They will be adding two additional limbs so it can carry packages and even go up and down stairs and rough terrains. Who knows, in the future you’ll get your package delivered by this monocyle robot with legs.

The post Monocycle robot with legs may be last-mile delivery helper in the future first appeared on Yanko Design.

Concept laptop and tablet adapts to your mobile working needs

Posted on by

As we continue to be more mobile in terms of where we work and study, gadgets and devices are adjusting to users’ needs and wants. More often than not, laptops and tablets are the devices of choice as it allows us to work wherever we want, oftentimes at cafes and shared or co-working spaces or sometimes even while commuting. There are already a lot of options out there but we continue to look at concepts that can bring even more improvements to our nomad working lifestyle.

Designer: Lee Seung-Hee

This concept laptop called LT-1 aims to solve the pain point of having a disorganized work environment when you’re working outside or having several gadgets with you even as you have limited space and are continuously mobile. What we need is to have a device that is efficient, practical, can adjust to our needs, and can multi-task just like what we’re probably doing. What they came up with is a minimalist looking laptop that has several functionalities built into it.

What’s unique about this concept is that you have a sub-display in the keyboard area which can show things that don’t need much of your attention but may be important to know. This includes your music playlist, preview of messages, and even a scheduler if you need to take a quick look at those things. Taking up 1/3 of your keyboard is the multi tablet section which basically serves as your trackpad and a multi-touch surface where you can use your pencil or stylus. It also has something called Mode Change LED although it’s not fully explained what it does. The keyboard itself has shortcut keys and there’s a function bar at the top where you have power key, switch to tablet mode, sound control, and something called “behavioral recording”.

They assume that you’ll use the LT-1 a lot so there’s a chance of overheating. There’s a back vent and a side vent to help with that as one of the ideas for this laptop and tablet in one is that it will remain cool. As a concept, this is pretty interesting but the actual execution may be challenging, and maybe even expensive. Let’s see how far the LT-1 Concept Laptop can get and if we’ll eventually see it in the market.

The post Concept laptop and tablet adapts to your mobile working needs first appeared on Yanko Design.

Dog training clicker has built-in treat storage

Posted on by

Dog owners who are self training their pets know that clicker training is probably one of the standard practices. It is also known as marker training as you use a clicker to let the dog know that it has fulfilled a task. As you continually use the clicker, it conditions the dog to want to perform what you want it to do based on the theory of operant conditioning. There are a lot of different clickers available for this specific training but of course there’s always room for newer and more innovative versions.

Designer: Zerong Yang

Depending on your dog training regimen, the use of clickers sometimes forego treats as rewards as the click themselves are the rewards for your dog. But there are also those that still use snacks to give to them once they are able to fulfill the task and to associate it with the clicker. The Clink Clicker combines the clicking and the treats in one convenient device so you just have to hold one thing when doing the training.

It looks like a typical clicker but it has a sliding mechanism where you can store the treats you want to use as rewards. So after the dog has finished the task you’re training them to do, you click the clicker and then the dog will probably come to you and you can feed them the treat immediately. The space for the snacks is a desiccant compartment so it will remain fresh even if you’re outside for your training and it may be a bit hot.

It’s a simple solution to a treat management problem that some dog owners may experience. Having the clicker and the treat storage in just one device makes it more convenient and may shave off a few seconds during your training, leaving more time for learning and fun (well for your dogs, at least).

The post Dog training clicker has built-in treat storage first appeared on Yanko Design.

Vinyl turntable concept uses industrial materials and design

Posted on by

As much as I love my music streaming services, I’m also a fan of playing analog music. Well, at least in theory. I have several CDs at home already but I don’t have a CD player (still researching about what’s the best one that my wallet can afford). I also want to have a vinyl player soon although that will take more of an investment both for the player itself and the vinyls I’ll buy afterwards. So I am always interested when I see concepts or designs for turntables as it can be references for what I’ll buy in the (hopefully) near future.

Designer: Antoine Brieux / NAK Studio

This concept for a high end industrial design linear vinyl turntable will probably not fit into my budget if it ever gets made but it’s still pretty interesting to look at. It will be made up of full machined aluminum and magnesium parts but also uses glass and recycled Acrylonitrile Butadiene Styrene (ABS) so you get an industrial but minimalist look. The platter assembly has conical bearings shaft and actually looks like those old 35mm film projectors but placed horizontally.

In keeping with its industrial theme, you get an industrial drive belt driving system but with an air cushion linear arm to make it more interesting. The tonearm is Bluetooth embedded so you can connect it to Bluetooth speakers directly but you can also use the regular plug system if you prefer that. It also has a brushless motor and constant drive controller while it uses capacitive sensors to manage the start and end position of the arms which can use either an automatic or manual lift system.

The product render, including a video sample of what it might look like, makes it really look like a high end kind of vinyl player. But it also looks a bit heavy based on the materials that will be used so if you’re looking for something that can be portable or at least easy to move within your space, this might not be it. As for the quality when you actually play your vinyls on it, that remains to be seen.

The post Vinyl turntable concept uses industrial materials and design first appeared on Yanko Design.

Ergonomic wooden laptop stand is portable, sustainable

Posted on by

One of the things I have to do to not worsen my carpal tunnel syndrome and other things that can lead to repetitive strain injuries is to elevate my Macbook screen. I spend sometimes more than eight hours in front of the screen so I need to have more ergonomic tools to help manage my posture and not cause eye and muscle strain. Sometimes though these things can also be inconvenient, both to my workflow and my wallet.

Designer: Mickey Linskens

WOULDSTAND is a wooden laptop side that is ergonomic, sustainable, and they’re hoping eventually, affordable for ordinary employees (more on that later). The main purpose of this is to elevate your laptop screen to lessen the strain on your wrist and arms when using your device for a prolonged period of time. You can use it for laptops, tablets, and even books if you’re reviewing for exams or you’re just reading a lot on a table. It is designed to make sure that your screen is at arm’s length and the top edge is slightly below eye level.

The stand is made from renewable materials like FSC eucalyptus and Starplex plywood. It actually looks like a puzzle piece and can be easily assembled and there are also adjustable elements since different people would use it for different purposes. It’s also light enough despite the wooden material so you can carry it around without straining yourself as well. You can also use it even if you’re not at a table, like placing it on your lap or whatever stable surface you’re working from.

Since it’s locally produced and uses renewable materials, it’s also not as affordable as some in the market that are more mass produced. So the plan is to market it to companies by making the stand easily brandable. This way companies can buy it, have their logos included in the stand and then give it to their employees or to their customers. However, they’ll still sell it direct to customers for those who can spare € 30,00 to protect their muscles.

The post Ergonomic wooden laptop stand is portable, sustainable first appeared on Yanko Design.