Smartphone upcycling concept helps give your old companion a new lease on life

Mobile devices, both smartphones and tablets, have become an inescapable fact of modern life to the point that almost everyone has one. While they do empower people with their smart features, they unfortunately also inflict damage on the environment, whether it’s through their manufacturing or, more often than not, their improper disposal. Not all smartphone manufacturers have a well-established or easy process for owners to send back unused or broken devices for handling and responsible disposal, which means many of these end up in landfills where they eventually poison the soil and water. Some of these aren’t even totally broken just outdated or unused for one reason or another. Finding a different use for them delays their untimely demise, which is exactly what this upcycling concept tries to do, offering smartphones a better life after death.

Designer: Think Tank Team

There could be a variety of reasons for ditching an old but still functional smartphone. Some parts, like the screen, battery, or charging port might no longer be in tip-top shape, or the owner simply upgraded to a newer model that will last them another two years or so. Whatever the reason may be, it might not actually be enough to warrant simply throwing the phone in the waste bin, or even just keeping it in a drawer until it’s forgotten forever or, worse, becomes a safety hazard.

Project Afterlife tries to remedy that situation by upcycling rather than recycling the phone. This means it puts the device to a different use without actually modifying it or taking it apart, thereby using less energy, less resources, and less effort. This increases the likelihood that people will adopt this product because it is accessible and easy to use.

The product concept pretty much comes in a taco-like crescent shape made of recycled plastic and given a frosted finish. You simply slide in the phone from the opening and set it on a flat surface with its curved edge at the bottom. The shape is balanced in such a way that it will stay still unless you intentionally rock it, and that rocking motion actually affects its functions. Just like a game controller with motion sensors, tilting the phone lets you cycle through its different modes without having to touch the screen. Rocking also makes the “Endless Clock” change the clock face at every movement, while both the “Timeline” photo stream and the “Moment” abstract art display also react to such movement.

Admittedly, you can simply take that same old smartphone, put it on a stand, and use it in the same way as a clock or small photo frame. Project Afterlife, however, also transforms the phone into a kinetic art object that will enhance the ambiance of your desk or shelf. It’s a simple yet impressive example of how upcycling not only helps save the environment but even adds value to your experience.

The post Smartphone upcycling concept helps give your old companion a new lease on life first appeared on Yanko Design.

This aluminum bench stands on the shoulders of discarded Mac Pro cases

Apple is not a big fan of reusing its products for something else, at least something that is still close to the original function of the design. It probably won’t object to completely unrelated applications of those designs, especially when it’s for a creative and artistic purpose. The non-functional parts of an iPhone, for example, could be disassembled and framed to be displayed as a piece of tech history. Or one might simply take the empty shells of old Mac Pro and turn them into a piece of structural art, which is exactly what this rather striking metal bench tries to accomplish in a way that will probably make you wonder how strong those old Apple desktops might have been.

Designers: Quinner Baird, Alec Alborg, Ferb Liebana, Berit Levy, Jaime Uriarte (Caliper)

The designs for more recent Mac Pros have been rather controversial, to say the least. The cylindrical 2013 was derided for looking like a trash can, while the boxy 2019 design, though a bit more traditional, is jokingly called a cheese grater. Neither are good foundations for a stable piece of furniture, but the first-ever Mac Pro fortunately fits the bill perfectly. It was a minimalist brushed aluminum box with tapered legs on the front and back to raise it up and equally tapered handles on those same sides for easier lifting.

Made for Manhattan clothing brand Hidden as part of store display, the Mac Pro Bench is exactly what it sounds like. It takes two first-gen Mac Pros, totally gutted of any and all electronic components, and has a folded aluminum plank attached on top. The plan has a tapered shape that fits perfectly between the front and back handles, making it feel as if the desktops were made for this very purpose. Two versions of the bench exist, one preserving the brushed aluminum aesthetic of the Mac Pro, and another thoroughly coated in Hidden’s green motif.

It’s not being sold en masse, which will probably keep Apple’s lawyers happy, though there are also ways to make your own. That said, it’s probably not a good idea outside of making it a decorative piece. It’s actually not tested how much weight the Mac Pros will be able to handle, especially with a bench meant to sit more than one person. The hollow legs of the desktop don’t look reassuring either, and it might have been more practical to have sawed those off, even if it meant ruining the original Mac Pro shape.

That said, it’s possible to reinforce the foundations of the Mac Pro Bench to make it a more usable piece of furniture. More importantly, however, the piece of art could also spark the imagination and creativity of others to make similar designs that reuse discarded desktop PCs in a less conventional and more interesting manner.

The post This aluminum bench stands on the shoulders of discarded Mac Pro cases first appeared on Yanko Design.

A Sustainable Lighting Solution That Redefines The Interaction Between Light And Sound

In the ever-evolving landscape of technology and design, the fusion of functionality and artistic expression continues to yield groundbreaking innovations. One such marvel is Oloïd, a sustainable acoustic luminaire born from the collaborative synergy of Impact Acoustic; a provider of sustainable acoustic solutions, and the esteemed design studio atelier oï. This unique lighting fixture not only delivers exceptional sound absorption but also redefines the way light and sound interact, creating a transformative experience that enhances the ambiance of any space.

Designer: Impact Acoustic Atelier oï

At the heart of Oloïd’s revolutionary design lies Archisonic Felt, a high-performance sustainable acoustic absorber crafted from upcycled PET bottles. This versatile material demonstrates outstanding sound absorption capabilities and embodies a commitment to sustainability and responsible material sourcing. The Cradle to Cradle certification and LEED accreditation of Archisonic Felt underscore its eco-friendly credentials, aligning with the growing demand for environmentally conscious design solutions.

Oloïd distinguishes itself by offering a transformative lighting experience that seamlessly integrates functionality with artistic expression. The collaboration between Impact Acoustic and Atelier oï is not merely about illuminating a space but about creating an immersive environment where light and sound harmonize effortlessly.

Aurel Aebi, a key figure at Atelier oï, highlights the creative process that brought Oloïd to life. “At atelier oï, we often begin our creative process with an encounter with the material,” Aebi explains. “Our goal was to find a way to make the sustainable material speak in a new way.” This innovative approach involved working with the material’s stiffness and flatness to create organic shapes that redefine conventional luminaire design.

Oloïd is available in a stunning array of 32 colors, presenting a curated selection from the Archisonic Felt range. This diversity empowers users to personalize their spaces, allowing for the creation of bespoke environments that reflect individual tastes and preferences. The luminaire’s design seamlessly integrates the organic shapes derived from the unique qualities of Archisonic Felt, transcending two-dimensional panels into captivating three-dimensional entities.

Sven Erni, co-founder of Impact Acoustic, expresses his fascination with the collaborative process that transformed their material. “The collaboration fascinated us as we witnessed the metamorphosis of our material,” Erni notes. “This was made possible using a distinctive cutting technique at specific angles and the skillful folding of the panels. This creative approach seamlessly transformed the two-dimensional panels into fascinating three-dimensional entities, transcending surfaces to tangible bodies.”

Oloïd not only sets a new standard for sound-absorbing luminaires but also stands as a testament to the potential of sustainable design in reshaping our surroundings. With its commitment to responsible material usage, innovative design, and the seamless integration of light and sound, Oloïd emerges as a beacon of eco-conscious creativity, inviting us to reimagine the possibilities of our illuminated spaces.

The post A Sustainable Lighting Solution That Redefines The Interaction Between Light And Sound first appeared on Yanko Design.

Upcycled skateboard factory rejects transform into warm wall lighting

Recycling is a great way to reduce the amount of waste that ends up in landfills, but the process itself can sometimes have some negative impact. There’s still a lot of energy and water involved in converting materials into something usable again, and there’s also some loss when the original design gets destroyed in the process. Upcycling is a more efficient and time-saving alternative, but not everything can be upcycled and not everything that can be upcycled can be used in newer and better ways. Sometimes, it takes a bit more creative thinking to transform one thing into a completely different thing, like how factory seconds from skateboard manufacturers are turned into these understated yet elegant wall lamps.

Designers: Michael and Mariel Upton

Skateboards are objects that bring up images of speed, tricks, and devilish stunts. They’re hardly associated with warmth, subtlety, or even light. Of course, these associations aren’t inherent in the shape of the skateboard’s wooden deck, which makes them open for reuse and reinterpretation, as the case of this trio of wall lamps demonstrates, providing stylish lighting that hardly gives a clue to their origins.

Considering the long oval shapes of skateboard decks, not to mention their upward curved ends, you definitely wouldn’t be able to guess that these wall lights are exactly made from those wooden parts. That’s because these pieces of 7-ply maple wood are taken from factory rejects, decks that obviously didn’t make the cut. Since the shapes of these boards are too specific for general use, they often end up simply being discarded. They’re thankfully made from wood, so they’re biodegradable and have fewer harmful effects on the environment, but they’re still waste and, more importantly, wasted opportunity.

Upton thankfully has the wonderful idea of using those boards to provide ambient lighting as well as a piece of minimalist wall art. The discarded decks are cut to create a shorter and straighter oval shape and then paired with lighting hardware on the back. Each of the three variants, namely, Heru, Cuna, and Mara, get a square piece of original art that becomes the visual center of the entire fixture. With this, even if the light is off, the designs act as decorative pieces that enhance a room’s ambiance in a subtle way.

When the light is on, however, you get a warm ambient halo of light that sets a calming and relaxing mood in any space. The light is emitted from the back and is reflected on the mounting surface, making it look softer and avoiding painful glare when you look in its direction. The wall lamp projects a character of calm and warmth, definitely not something you’d expect from a speedster skateboard that it would have become in some other lifetime.

The post Upcycled skateboard factory rejects transform into warm wall lighting first appeared on Yanko Design.

Turn your bathroom into a sustainable piece of art with 3D printed tiles

If you’re redesigning your bathroom but you’re bored with the regularly-designed tiles that you see in the market, this 3D printed tile design may be for you. That is, if you don’t mind having some organism looking creatures permanently displayed while you’re taking a bath. It is sustainable and biodegradable so that’s a major bonus if you’re concerned with things like that.

Designer: bioMATTERS

The MYCO-ALGA is an interior tiling system that is made from natural and organic waste that have been upcycled together with actual living organisms. There are different sustainable processes involved in coming up with this including designing them digitally, 3D printing, growing the organisms, enriching them with bio-pigments, fabrication, etc. It begins with the waste materials being ground into a paste-like substrate as a foundation.

Once it has been turned into paste, it is then 3D printed into customized shapes and for two weeks, they are placed and cultivated in a controlled environment so that the mycelium turns into the thing that binds the material together. They are then placed in convection ovens and as they “bake”, they turn into lightweight materials but at the same time, they become strong and rigid. The bio-pigments from the harvested algae which are now gel are then applied to the tiles.

The tiles are definitely unique looking and can be a conversation piece when you have people visit your bathroom. They were designed to specifically look like organisms are crawling all over your space. The mosaic-like design with the non-repeating patterns are visually striking and 100% sustainable.

The post Turn your bathroom into a sustainable piece of art with 3D printed tiles first appeared on Yanko Design.

A humble cardboard box is reinvented into functional, modular furniture

A lot of my friends who are parents often complain (well, not really) that they buy expensive toys for their kids only for them to fall in love with the packaging. In fact they play with the boxes and packages more than the actual toys. Maybe we should just stick to buying kids boxes rather than actual toys and we’ll all save a lot of money, right? Discarded boxes are some of the biggest waste that we have in junkyards, although because of their materials, you are able to actually recycle them at the end of their life cycle. But what if you could use them for other things instead of just recycling and throwing them away?

Designer: Lee Lin

This designer was able to come up with a furniture series based on warehouse boxes. Instead of just recycling them or discarding them into its original material, Lee Lin instead was able to turn both new and used boxes into stackable block-shaped things that you can use to create chairs, tables, or just some decorative items for your space.

The “unusable” parts are cut out of the boxes and then they are stocked into block shapes. The designer them coats them with a thick layer of paint and after it dries, the process is repeated over and over. They also put breathing holes in the boxes so they will not eventually rot as the air is circulating within them. Since it has no fixed frame, you can use it to create whatever you need, whether it’s a stool, bench, side table, main table, or just a decorative ornament for the room.

The renders show dark blue boxes with a rough texture but they don’t really look like boxes. If you have a dark aesthetic, then this would fit right in your room or space. Depending on the lighting, it can look like it’s made from ceramics or plastic or even a water-based design. As to how sturdy these will be remains to be seen. At least if you’re just using it for decor, it shouldn’t be that bad. Sitting on it for a long time or putting stuff on top of it will be another matter.

The post A humble cardboard box is reinvented into functional, modular furniture first appeared on Yanko Design.

These fuzzy pendant lights are made from stacked felt cut-offs

Whenever we try to make something, there will always be materials that are cut off, left unused, and ultimately thrown away. Whether it’s paper, wood, plastic, textile, or even metal, these wasted materials end up hurting the environment sooner or later, whether directly or indirectly. There is now a more conscientious effort among manufacturers and designers to pay attention to such wasted resources, either by reducing their number or reusing them for some other purpose. The former requires smarter and more ingenious designs that utilize every inch of a material, which can sometimes be more difficult than it sounds. Fortunately, recycling and upcycling cut-offs can actually be easier, especially if you can combine them into interesting shapes that serve as the foundations of beautiful furniture and lighting fixtures such as these hanging lamps.

Designers: Anthony Frank Keeler, Sarah Coleman, Wisse Trooster

We saw Stackabl earlier this year as one of those efforts to upcycle factor off-cut felt. More than just a specific collection of chairs and couches, however, it was actually a tool that lets you design your own seat using stacked layers of material. Given their textile origins, seating furniture seems to be the most immediate application for this tool, but now you can also use the configurator to design comfy-looking lamps to hang from your ceilings.

Stackabl is like a DIY tool for designing your own pendant lamp. It lets customers dictate different parameters like the length of the lamp, the diameter of the “discs” of felt, and even where the actual lights will be located along the stack of material. Of course, you can also mix and match different colors, creating a composition that is as harmonious or as discordant as you like. You don’t even have to be limited to a single disc size since you can shrink or grow the circles anywhere along the length of the lamp.

The result is a modular pendant lamp that is both striking and sustainable. It’s almost too easy to compare it with a tower of pancakes if not for the more earthy tones that the material has. Since no two configurations are identical (unless you intend them to be so), each Stackabl pendant lamp is immediately unique and personal. The lamps also convey feelings of warmth and fuzziness because of the woven felt as well as the diffused light. It makes for a perfect mood-setter for areas that need to feel cozy and comfortable.

It’s not just the upcycled felt that’s environment-friendly, even though it’s the main focus of the Stackabl system. The aluminum used to hold things together is also upcycled, and the LEDs that provide illumination are considered to be more power-efficient than conventional bulbs. It’s not a completely green product, with the use of acrylic covers to diffuse the light and adhesives to keep things together, but it still takes an important step toward sustainability by giving leftover materials a new home.

The post These fuzzy pendant lights are made from stacked felt cut-offs first appeared on Yanko Design.

Mosevic denim sunglasses upcycles thigh-wear to eyewear

It’s almost too easy to take for granted the way clothing and apparel can affect the environment. After all, they aren’t completely made from plastic, though some are made from synthetic non-biodegradable fibers. Textile, however, uses a lot of water, energy, and toxic chemicals, and the denim material that makes up our favorite jeans is one of those culprits. Given how many of us go through dozens of clothes a year or just how many unsold clothes are made annually, the potential for textile to overrun landfills is frighteningly high. Of course, we can always recycle them, but few people and companies actually do that. Fortunately, there is also a rising trend of upcycling used products or material waste, like this startup that turns fashionable jeans into fashionable sunglasses.

Designer: Jack Spencer (Mosevic)

Denim has unique material and visual properties that make it an interesting ingredient in many products or artworks that aren’t related to clothing. The unique patterns and rough texture of denim make it easily distinguishable among other textiles, so anything that “wears” it will make one immediately think of jeans. As it turns out, it’s also possible to turn denim into other objects with the right mix of ingredients that make it almost as tough as plastic but exponentially more eco-friendly.

Mosevic was born from a desire to reduce the negative impact of wasted denim material on the environment, even by just a little bit. Just like how layers of carbon fibers mixed with resin have become a common material used in engineering, the “Shades of Denim” collection is made from layers of waste denim infused with bio-resin and then pressed to become a solid structure. The resulting material is then machined into the individual parts that make up the eyewear and then connected with specially-designed metal reinforcements.

The resulting “Solid Denim” material retains many of the desirable properties of denim, like the patterns of cotton fibers formed when cutting through the material, as well as the texture and appearance of denim. However, unlike typical denim, these pieces are finished with hard natural wax that makes them resistant to water and oils, such as those on your skin or sunscreen. For all intents and purposes, these sunglasses are like your typical shades, except that they look like designer accessories because of their unique flair.

The Mosevic sunglasses give old jeans and waste denim a new home and delay their eventual fate in landfills. That said, the entire process isn’t yet completely sustainable, both in an environmental way and in business terms. The sunglasses are handmade in small batches, a process that takes up to two weeks to finish. Fortunately, there are plans to scale up and make the process more efficient for larger numbers, which ultimately translates to more denim material being upcycled.

Given the amount of denim used, however, it still wouldn’t put a dent in the textile waste problem. Every little bit counts, though, and the use of textile in this manner could spark the imagination and creativity of other designers to come up with ways to upcycle materials and transform them into something new and something beautiful.

The post Mosevic denim sunglasses upcycles thigh-wear to eyewear first appeared on Yanko Design.

Samsung sustainability initiative takes a step forward with Unpacked 2022 devices

Smartphones are one of the most ubiquitous pieces of consumer electronics in the world today. An overwhelming number of people have one, some might even have two, and millions of phones are shipped every quarter. In fact, there might be too many smartphones out there in the world, and not all of them are actually in use or even in one piece. As wonderful as smartphones are, their production and disposal contribute to the worsening state of our environment, especially because of how many they are. Smartphone manufacturers have thankfully started to be more aware of their critical role in this broken ecosystem and, even better, are starting to take action. As one of the world’s biggest smartphone makers, Samsung is thankfully taking that responsibility seriously and is boasting the achievements that take it closer to its grand goal in 2025.

Designer: Samsung

From the cradle to the grave, a smartphone’s life is filled with materials and processes that harm the environment or even people. From the plastics used in electronics to the chemicals for treating different parts to the materials used in packaging, these powerful computers in our pockets and hands are almost like death traps for the planet. It’s too late to turn back, of course, so smartphone manufacturers are instead trying to reduce their negative impact little by little on all fronts. Samsung’s “Galaxy for the Planet” initiative tries to cover those different fronts, and the newest batch of devices it just announced demonstrates the progress it has made since the program was announced last year.

Samsung started with the Galaxy S22 earlier this year by using plastics made from recycled fishing nets that would have otherwise ruined our oceans and aquatic life. Since then, Samsung has expanded the use of that material to other Galaxy devices, including the Galaxy Book 2 Pro laptop and the Galaxy Tab S8 tablets. The new Galaxy Z Fold 4 and Galaxy Z Flip 4 continue that tradition and are even joined by the Galaxy Buds 2 Pro. In fact, Samsung boasts that 90% of its new pro earbuds are made using recycled materials. Given its smaller size and fewer components, that is admittedly not that hard to pull off.

The company has also been trying to improve its packaging, and no, it’s not just about removing the charger. The company now uses 100% recycled paper for the packaging of its flagship phones, which does raise questions about the state of its non-flagship phone packaging. Samsung is also trying to reduce how much single-use plastic it puts inside the box, though it’s not yet ready to get rid of them entirely. Both the Galaxy Z Fold 4 and the Galaxy Z Flip 4 boxes are less than half the size of their original models, which results in more efficient transport and reduced carbon emissions overall.

Sooner or later, phones do reach their end of life, mostly because they no longer meet the needs of their owners. That doesn’t mean they’re completely useless, though, especially if they’re actually still functional. Rather than simply breaking these down and having them undergo recycling processes that consume a lot of water and energy, Samsung is proposing upcycling phones to serve other needs, like acting as smart home hubs or cameras. In one specific case, old Galaxy devices even become eye diagnostic tools used in underserved communities.

These small steps forward take Samsung closer to its ambitious goal for 2025, but it might still be quite a ways away from that milestone. In three years, Samsung envisions itself as having eliminated all plastics in packaging, achieved zero waste to landfill, and used recycled materials on all mobile products, not just the flagship ones. Those are lofty goals, indeed, and some might say almost impossible to reach by 2025. When it comes to sustainability, however, every step, no matter how small, counts toward healing the planet and making sure there will still be people around to buy those fancy smartphones in the future.

The post Samsung sustainability initiative takes a step forward with Unpacked 2022 devices first appeared on Yanko Design.

TOOB turns bicycle inner tubes into rubbery hand-made accessories

The interest, purchase, and use of bicycles have seen an uptick in the past few years, but these leg-powered two-wheeled vehicles have been around for decades. Many of their problems have also been around just as long, including the parts that easily get worn down and then thrown away. Although significantly more sustainable than cars or even motorcycles, bikes have parts that are definitely environment-unfriendly. Those range from bits of plastic here and there as well as toxic chemicals used in painting their metal frames. Rubber tires and inner tubes, however, are even bigger sources of pollutants down the road. Fortunately, this line of accessories puts inner tubes to a different use, allowing them to go the distance even after they have served their original purpose.

Designer: Roy Sherizly (TOOB)

Bicycle tires are meant to last a long time, but they do eventually meet their end, sometimes sooner than planned. They get worn down over the years, sure, but accidents might make them completely unusable at some earlier point in time. The same is especially true for inner tubes that can no longer be used entirely when they get damaged. These rubber-based products get thrown out and aren’t biodegradable, so they eventually break down into microplastics that pollute waters and even the soil. That green and sustainable lifestyle you’ve chosen suddenly becomes less so because of these wasted inner tubes.

Fortunately, inner tubes don’t have to be discarded just because a small part has become damaged. They’re no longer usable for bicycle wheels, but that doesn’t mean they need to meet the end of their material life as well. More economical and efficient than recycling, the upcycling mentality has taken root with many designers, and this line of TOOB accessories demonstrates how even something as simple and unattractive as an inner tube can become a useful and even stylish product.

“Useless” bicycle inner tubes are handpicked from Tel Aviv’s local shops and are then inspected and thoroughly cleaned. Depending on how much damage it has, the useful parts are cut off and then transformed into completely different products. The TOOB Keychains, for example, only need a small part of the inner tube. In addition to the material’s natural durability, TOOB adds a strong button that makes it easy to open and close the keychain to look around belts and bags. The TOOB Strap, in contrast, requires a longer stretch of inner tubing. The accessory takes advantage of the tube’s natural stretchy properties to hold things down onto bike rails or other surfaces.

Inner tubes make the perfect material for this kind of heavy-duty accessory, and their clean appearance and smooth surfaces make for a nondescript aesthetic. The keychain, for example, looks discrete, and its black color blends with almost any pair of jeans or bag. TOOB also supports the local bicycle economy by giving shop owners a better way to dispose of their waste.

Inner tubes don’t last forever, though, and TOOB does admit that the material will eventually wear out and dry. Then again, almost everything does eventually, including materials like leather. Ideas like TOOB don’t completely remove synthetic rubber products like tires and tubing from the picture, but it helps delay their inevitable fate in landfills, at least until we can figure out how better and more sustainable alternatives.

The post TOOB turns bicycle inner tubes into rubbery hand-made accessories first appeared on Yanko Design.