Fujifilm’s X-T50 has a special dial for film simulations

Fujifilm has unveiled the X-T50 APS-C mirrorless camera, a long-awaited follow-up to the consumer-friendly X-T30 and X-T30 II. The new model retains key features from the past model, including the light weight and generous manual controls. At the same time, it adds a higher-resolution 40.2-megapixel sensor, 6.2K 30p video and other features from the X-T5 and other recent models. However, it also has a much higher price than the X-T30 and unusual new dial that may prove controversial. 

The X-T50 looks similar to the X-T30 II, with a relatively slim and light 438 gram (15.45 ounce) body, just a bit heavier than before. However, in place of the shooting mode dial on the previous model, Fujifilm introduced a dedicated film simulation dial with eight preset modes (Acros, Nostalgic Negative, Classic Neg and others), three custom slots for other built-in simulations and a custom slot for user-designed simulations.

The company likely believes that sales of the X100 V and VI took off due to the popularity of film simulations with the TikTok and influencer set. However, users may find that it's more of a hassle to change shooting modes (burst, single-shot etc.) than before.

Fujifilm's X-T50 has a special dial for film simulations
Fujifilm

One key feature missing from the X-T30 was in-body stabilization, but with the X-T50, Fujifilm has introduced a five-axis system with seven stops of shake reduction that hardly adds any weight. That will make it a much better tourism and street photography camera, as handheld shooting is possible at shutter speeds down to 1/4th of a second or so. It will also make the X-T50 far more useful for video. 

Unfortunately, the rear 1.8-million-dot display still only flips up/down and not out, so it's not going to be great for vlogging. Another feature carried over is the NP-W126S battery (about half the power of the battery in the X-T5), which is pretty small considering the higher-resolution sensor and upgraded video capabilities. 

With the same sensor as the X-T5, X-H2 and X100 VI, you can expect similar image quality and speeds, up to 13 fps bursts with the electronic shutter. Autofocus performance is likely to be in line with the X100 VI, which is to say, pretty good but not great. The main attraction, Fujifilm hopes, will be the film simulations that let creators take Instagram-ready shots straight out of the camera.

Fujifilm's X-T50 has a special dial for film simulations
Fujifilm

Like the X-100 VI, the X-T50 is surprisingly competent at video as well, with 6.2K at up to 30p and 10-bit F-Log2 on tap. That's why, again, it's a shame that it doesn't have a flip-out screen as vloggers and content creators may prefer the form factor and interchangeable lenses over the X100 VI. 

Fujifilm also introduced the Fujinon XF16-50mmF2.8-4.8 R LM WR (24-75 or so in full-frame terms). It's a compact, lightweight and decently fast kit zoom that should be ideal for the X-T50. Though it costs $700 by itself, it's a much better deal if purchased in a kit.

The X-T50 is now on pre-order for $1,400 (body only), or $1,800 with the XF16-50mm. That's a hefty $500 more than the X-T30 II cost at launch, and just a few hundred dollars less than the X-T5. I'm not sure that the extra features justify such a large jump, but Fujifilm must be confident that people will pay it, given the runaway success of the X100 series. 

This article originally appeared on Engadget at https://www.engadget.com/fujifilms-x-t50-has-a-special-dial-for-film-simulations-060043643.html?src=rss

Fujifilm’s medium-frame GFX 100S II is lighter, cheaper and AI-enhanced

Fujifilm’s successor to the GFX 100S, its 2021 medium format camera with terrific performance but slow speeds, is the aptly named GFX 100S II. The new model is $1,000 cheaper, smaller, lighter and has (shocker) AI features to improve its autofocus, one of our gripes with its predecessor.

The Fujifilm GFX 100S II uses a 102MP high-speed sensor and the X-Processor 5 processing engine. The company says its medium format sensor is about 1.7 times larger than a 35mm full-frame sensor. Its body weighs around 883g (including the battery and memory card), making it the lightest in the lineup.

The camera has “enhanced” in-body image stabilization, allowing for a maximum of eight-stop, five-axis performance. This could boost its image quality when using longer exposure times. 

Fujifilm says it improved the sensor’s pixel layout design, enabling a standard sensitivity of ISO80. “When the sensor sensitivity is set at ISO80, the camera can capture images at greater dynamic range and lower noise than with the previous model” when shooting in 16-bit RAW mode, the company wrote in a press release. This should lead to better low-light performance, autofocus accuracy and overall image quality.

The camera’s sensor has an improved micro-lens design, increasing light use efficiency at its edges. Fujifilm says this gives it better image quality and autofocus accuracy around the edges than its predecessor.

A person holding and looking down at the Fujifilm GFX 100S II in an indoor setting with blurred background. View from the person’s left side.
Fujifilm

Like nearly every other bit of recent tech gear, Fujifilm is using AI in its products — in this case, AI-based subject detection. Fujifilm says it can automatically recognize animals, birds, cars, motorcycles, bicycles, airplanes, trains, insects, and drones and focus accordingly. The company claims its improved autofocus predictive algorithm and a continuous shooting speed of up to seven FPS make it better at tracking high-speed subjects. Autofocus was one of our nitpicks in Engadget’s review of the GFX 100S, so we’ll be curious to see if those claims hold up in practice.

On the video front, the new camera supports 4K / 30P 4:2:2 10bit videos (for more precise color reproduction) when using its internal SD card. It’s equipped with the F-Log 2 profile for improved dynamic range. Its compatibility is boosted by supporting Apple ProRes, but only when using an external solid-state drive connected via USB-C.

The Fujifilm GFX 100S II costs $4,999, or €5,499 in Europe. That’s cheaper than the $7,500 GFX 100 II, trading some extra video perks for less of a hit on the wallet. You can order it on Friday from Fujifilm’s website.

This article originally appeared on Engadget at https://www.engadget.com/fujifilms-medium-frame-gfx-100s-ii-is-lighter-cheaper-and-ai-enhanced-060037826.html?src=rss

Fujifilm’s medium-frame GFX 100S II is lighter, cheaper and AI-enhanced

Fujifilm’s successor to the GFX 100S, its 2021 medium format camera with terrific performance but slow speeds, is the aptly named GFX 100S II. The new model is $1,000 cheaper, smaller, lighter and has (shocker) AI features to improve its autofocus, one of our gripes with its predecessor.

The Fujifilm GFX 100S II uses a 102MP high-speed sensor and the X-Processor 5 processing engine. The company says its medium format sensor is about 1.7 times larger than a 35mm full-frame sensor. Its body weighs around 883g (including the battery and memory card), making it the lightest in the lineup.

The camera has “enhanced” in-body image stabilization, allowing for a maximum of eight-stop, five-axis performance. This could boost its image quality when using longer exposure times. 

Fujifilm says it improved the sensor’s pixel layout design, enabling a standard sensitivity of ISO80. “When the sensor sensitivity is set at ISO80, the camera can capture images at greater dynamic range and lower noise than with the previous model” when shooting in 16-bit RAW mode, the company wrote in a press release. This should lead to better low-light performance, autofocus accuracy and overall image quality.

The camera’s sensor has an improved micro-lens design, increasing light use efficiency at its edges. Fujifilm says this gives it better image quality and autofocus accuracy around the edges than its predecessor.

A person holding and looking down at the Fujifilm GFX 100S II in an indoor setting with blurred background. View from the person’s left side.
Fujifilm

Like nearly every other bit of recent tech gear, Fujifilm is using AI in its products — in this case, AI-based subject detection. Fujifilm says it can automatically recognize animals, birds, cars, motorcycles, bicycles, airplanes, trains, insects, and drones and focus accordingly. The company claims its improved autofocus predictive algorithm and a continuous shooting speed of up to seven FPS make it better at tracking high-speed subjects. Autofocus was one of our nitpicks in Engadget’s review of the GFX 100S, so we’ll be curious to see if those claims hold up in practice.

On the video front, the new camera supports 4K / 30P 4:2:2 10bit videos (for more precise color reproduction) when using its internal SD card. It’s equipped with the F-Log 2 profile for improved dynamic range. Its compatibility is boosted by supporting Apple ProRes, but only when using an external solid-state drive connected via USB-C.

The Fujifilm GFX 100S II costs $4,999, or €5,499 in Europe. That’s cheaper than the $7,500 GFX 100 II, trading some extra video perks for less of a hit on the wallet. You can order it on Friday from Fujifilm’s website.

This article originally appeared on Engadget at https://www.engadget.com/fujifilms-medium-frame-gfx-100s-ii-is-lighter-cheaper-and-ai-enhanced-060037826.html?src=rss

Deals: UNUM Pro Lifetime Subscription, save 93%

Are you new to social media marketing and looking for a tool to make the process easier? Look no further than UNUM, a comprehensive social media tool tailored to your needs. With UNUM, you can effortlessly create, edit, schedule, and auto-post content across platforms like Instagram, TikTok, LinkedIn, Pinterest, and Facebook. UNUM is more than […]

The post Deals: UNUM Pro Lifetime Subscription, save 93% appeared first on Geeky Gadgets.

Posted in Uncategorized | Tagged

Sony PSP emulator PPSSPP hits the iOS App Store

PPSSPP, an app that's capable of emulating PSP games, has joined the growing number of retro game emulators on the iOS App Store. The program has been around for almost 12 years, but prior to this, you could only install it on your device through workarounds. "Thanks to Apple for relaxing their policies, allowing retro games console emulators on the store," its developer Henrik Rydgård wrote in his announcement. If you'll recall, Apple updated its developer guidelines in early April, and since then, the company has approved an app that can emulate Game Boy and DS games and another that can play PS1 titles

Rydgård's app is free to download, but as he told The Verge, there's $5 gold version coming, as well. While the paid version of PPSSPP for Android does have some extra features, it's mostly available so that you can support his work. At the moment, the emulator you can download from the App Store doesn't support Magic Keyboard for the iPad, because he originally enabled compatibility using an undocumented API. Retro Achievements is also currently unavailable. Rydgård said they'll be re-added in future updates.

The emulator's other versions support the Just-in-time (JIT) compiler, which optimizes code to make it run more smoothly on a particular platform. However, the one on the App Store doesn't and will not ever support it unless Apple changes its rules. Rydgård says iOS devices are "generally fast enough" to run almost all PSP games at full speed, though, so you may not notice much of a difference. Of course, the PPSSPP program only contains the emulator itself — you're responsible for finding games you can play on the app, since Apple will not allow developers to upload games they don't own the rights to. 

This article originally appeared on Engadget at https://www.engadget.com/sony-psp-emulator-ppsspp-hits-the-ios-app-store-052506248.html?src=rss

Sony PSP emulator PPSSPP hits the iOS App Store

PPSSPP, an app that's capable of emulating PSP games, has joined the growing number of retro game emulators on the iOS App Store. The program has been around for almost 12 years, but prior to this, you could only install it on your device through workarounds. "Thanks to Apple for relaxing their policies, allowing retro games console emulators on the store," its developer Henrik Rydgård wrote in his announcement. If you'll recall, Apple updated its developer guidelines in early April, and since then, the company has approved an app that can emulate Game Boy and DS games and another that can play PS1 titles

Rydgård's app is free to download, but as he told The Verge, there's $5 gold version coming, as well. While the paid version of PPSSPP for Android does have some extra features, it's mostly available so that you can support his work. At the moment, the emulator you can download from the App Store doesn't support Magic Keyboard for the iPad, because he originally enabled compatibility using an undocumented API. Retro Achievements is also currently unavailable. Rydgård said they'll be re-added in future updates.

The emulator's other versions support the Just-in-time (JIT) compiler, which optimizes code to make it run more smoothly on a particular platform. However, the one on the App Store doesn't and will not ever support it unless Apple changes its rules. Rydgård says iOS devices are "generally fast enough" to run almost all PSP games at full speed, though, so you may not notice much of a difference. Of course, the PPSSPP program only contains the emulator itself — you're responsible for finding games you can play on the app, since Apple will not allow developers to upload games they don't own the rights to. 

This article originally appeared on Engadget at https://www.engadget.com/sony-psp-emulator-ppsspp-hits-the-ios-app-store-052506248.html?src=rss

More iOS 17.5 Settings You Should Change

iOS 17.5

Apple’s iOS 17.5 brings a host of new features and improvements to enhance your iPhone experience. However, to fully optimize your device’s performance, security, and battery life, it’s crucial to understand and configure various system settings effectively. In this article, we’ll guide you through the key settings you should adjust after updating to iOS 17.5. […]

The post More iOS 17.5 Settings You Should Change appeared first on Geeky Gadgets.

What if AirPods had ChatGPT, could translate languages, and came with a touchscreen case?

Meet the Wooask TransBuds A8 – a pair of TWS earbuds that are so unique you’ll want to ditch your AirPods for them. Built with ChatGPT integration in the earbuds themselves, these wearables put the power of AI in your ear, actively translating 147 languages and accents in real-time, without an app. What’s better, if you do need to navigate through the TransBuds A8’s functionalities, you don’t even need to look at your smartphone, the earbuds case comes with a nifty 2-inch screen for both online or offline translation, as well as the ability to simply chat with ChatGPT the way Iron Man chats with JARVIS. Oh, and you can listen to music too.

Designer: Wooask Technology

Click Here to Buy Now: $179 $299 (40% off). Hurry, only 63/200 left!

The A8 translation earbuds facilitate real-time bidirectional translation, allowing two people to wear one earbud each for instant simultaneous interpretation.

The TransBuds A8 has a familiar design, albeit with a few VERY clever upgrades. Sure, you’ve got the white case with a flip-top lid that reveals two white earbuds… but on both hardware and software fronts, the TransBuds A8 are much more advanced than any regular TWS earbuds you’ll find on the market. For starters, the entire wearable has ChatGPT integration, giving you a voice assistant that is far more advanced than Google, Siri, or Alexa. You can simply tap the earphones to talk to ChatGPT, or access the AI through the unique interface built into the case. The case with a touchscreen is a welcome feature too – it eliminates the need for an app, and gives you a perfect standalone device that works without draining your phone’s battery or piggy-backing off your phone’s cellular network.

By leveraging ChatGPT’s vast knowledge base and natural language processing capabilities, users can enjoy more than just translation assistance.

The presence of AI isn’t just a bandwagon feature, it helps aid the TransBuds A8’s core value proposition – the ability to actively translate 77 languages and 70 accents in real-time, giving you the ability to pretty much travel anywhere in the world without a language barrier. The interaction is swift and seamless, either share an earbud with someone and have bi-directional conversations in two separate languages, and the earbuds will actively translate both of them simultaneously, or use the earbuds and case together to have a conversation with a local. The earbud-sharing method is perfect for in-person meetings and other long conversations. Each person wears one earbud like a Bluetooth earpiece of sorts, and the TransBuds A8 listens to what the opposite person is saying, and translates it for you right in your ear. A transcript of your entire conversation gets captured as a text thread on the TransBuds A8’s screen, and can be saved for later, allowing you to quickly and easily transcribe an entire meeting using the power of AI.

Alternatively, the case itself comes with a microphone and powerful speakers, allowing you to use just the case as a translator device. Hold it up and speak into it, and the TransBuds A8 lets you have a conversation with a local or a stranger without needing to share an earpiece. A powerful mic and speaker system allow you to easily converse with people even around ambient noise, while the display on the case does a good job of allowing people to read the translated text if they can’t hear the translated audio.

The case, frankly, is more of a smartphone that houses earbuds than just your average charging case. It runs on a Qualcomm Quad-Core Processor and earbuds use a Qualcomm 3040 chipset that allows it to translate 147 languages and accents with a latency of 0.5 seconds and an impressive 98% accuracy. The 2-inch screen has an app drawer that lets you access the TransBuds A8’s different features, even letting you tap into the offline translation feature that works with 16 popular languages. Buttons on the side of the case let you increase or decrease the case’s volume, or even go back to the home screen while navigating the interface.

The earbuds are remarkable too, with an ergonomic design, and a dual-mic setup that powers the ENC (Environment Noise Cancelation) feature to help you speak and hear clearly even if you’re in a noisy environment. The earbuds have a translation time of 5 hours, and a regular battery life of 35 hours along with the case that doubles as a charging dock for the buds. 16 gigabytes of in-built memory means you can even load your favorite MP3 files right onto the case, turning it into a makeshift iPod Touch that plays music directly without a streaming app or pairing with your phone. You can, however, pair the earbuds with your phone to listen to music, watch movies, or take calls too.

Quite the all-round device, the TransBuds A8 are for any and everyone. They work independently without your phone, translating over a hundred languages, transcribing conversations, and giving you the power of ChatGPT right in your ears. They also work as your standard TWS buds when you’re looking for something traditional, pairing with your phone via Bluetooth for answering calls, watching TikTok, or listening to music and podcasts. The buds are ideal for avid travelers, students, digital nomads, expats, and people working in multicultural companies and teams. The TransBuds A8 starts at a discounted $179 (an absolute steal considering the features it packs), which also includes one year of free ChatGPT integration. Subsequently, you’ll either be required to pay $9.9 per month or $40 annually for the AI features – online and offline translation remains free forever.

Click Here to Buy Now: $179 $299 (40% off). Hurry, only 63/200 left!

The post What if AirPods had ChatGPT, could translate languages, and came with a touchscreen case? first appeared on Yanko Design.

3D Printed Chess Set pays respect to the Ukraine invasion with a poignant war-themed design

Unless you are Elon Musk and believe chess is “too simple to be useful in real life,” you know, chess is a strategic and competitive game. It requires meticulous planning and clear objectivity. If you don’t have an objective in mind, your moves will be directionless and you will end up wasting time thinking and moving without purpose. Through the gameplay, it instills cognitive thinking, benefits mental well-being, and can now be a source of thoughtful restoration in the war-torn Ukraine.

Cuibiono, a design-first not-for-profit, has been at the forefront of providing aid to the regions where geopolitical conflicts like war have damaged humanity. With the new chess set, it has conceived using recycled biomaterials (PLA) and 3D printing, the NGO is giving everyone a chance to jump onto their journey of creativity, sustainability, and giving back, helping make a difference and restore homes in Kharkiv, Ukraine.

Designer: Cuibiono

The stackable chess set is inspired by the war-torn and displaced Kharkiv, which has been on the receiving end of the Russian invasion. Called the Kindachess – S, this set 3D-printed from naturally degradable bioplastics – features a board segmented to depict the nation under war. It is designed as fractures on the earth’s crust. But when it’s stacked to be stored, the dividing lines on the board form the Ukrainian flag to depict unity and the satisfaction of returning home.

The idea of a chess set whose profit from sales proceeds would go into restoring homes in Kharkiv is the brainchild of designer Liam Hwang of Cuibiono. The compact, stackable chess set is 3D printed sustainably in Hackney, London. It measures 200mm x 200mm when laid out for playing and fits into a case measuring 290mm x 164mm after use.

This is not Cuibiono’s first such sustainably driven product with the idea of giving back. The NGO states, “we are committed to sustainability.” All the products designed in their facilities are crafted with eco-friendly materials (like recycled PLA in the case of the chess set). The chess set, selling in two color contrasts: wheat and sky, ivory and walnut, is now available at £200 (approximately $250). Buy now, and support the cause becoming a part of the community that cares.

The post 3D Printed Chess Set pays respect to the Ukraine invasion with a poignant war-themed design first appeared on Yanko Design.

Record-breaking Drone hit 510km/h speeds, dethroning Red Bull for the World’s Fastest Drone

Earlier this year, Dutch Drone Gods, in partnership with Red Bull, unveiled the World’s Fastest Drone that went head-to-head with Max Verstappen behind the wheel of an F1 car. With a top speed of 350km/h, that drone held the title for barely a few months before YouTuber Luke Maximo Bell decided to challenge it.

Taking on the entire design and R&D team of Red Bull Racing, Bell managed to 3D-print a drone that was nearly 50% faster, hitting high speeds of 500km/h (310mph) and setting a new record, verified by the team at Guinness Book of World Records. The video above captures Bell’s entire journey, from prototype to building to tuning, and finally FPV footage of the world’s fastest drone. To think that one YouTuber with a BambuLabs printer managed to outpace a drone built out of carbon fiber by the elites at Red Bull Racing known for manufacturing the world’s leading F1 cars…

Designer: Luke Maximo Bell

Bell’s design process was a reiteration of one of his older drones named Peregreen, which could hit speeds of up to 400km/h. If you look at the shape of the drone you’ll quickly realise how even Red Bull and DDG opted for a similar format. The drone isn’t your average quadcopter or even FPV racer. Instead, it has a missile-style design with propellers at the bottom that give it an eVTOL style ability to vertically take off, tilt forward to race ahead, and then land vertically too.

The backbone of Peregreen 2’s success lies in its meticulous design and the use of high-quality materials. The frame, constructed from carbon fiber, was chosen for its exceptional strength and wide availability. Custom frames were precision-cut using a CNC machine at Flying Robot in Cape Town. Despite initial setbacks with incorrect mounting hole dimensions, which required manual adjustments, the final product was a high-precision, robust frame capable of withstanding the rigors of high-speed flight. Building on data from the original Peregreen, Bell and his father (who helped build the original Peregreen) selected larger motors, propellers, and batteries. However, this brought a new set of challenges. The initial batteries overheated, reaching temperatures above 130°C, leading to failures. Additionally, the motor wires were not thick enough, causing them to overheat and even catch fire during bench tests. After extensive testing and adjustments, the team switched to thicker wires and sourced new batteries that maintained a stable temperature below 80°C. These changes were crucial in ensuring the drone could operate at high speeds without the risk of overheating or component failure.

A cheap reliable way to test aerodynamics, simply hold it outside a car’s window!

Aerodynamics played a pivotal role in the drone’s performance. Initial designs faced stability issues at high speeds, necessitating extensive experimentation with tail lengths and fin sizes. The goal was to achieve a stable flight profile with a low drag coefficient. By creating and testing various models (often by simply 3D printing them and holding them out of a car window at high speeds), the team eventually found a configuration that provided the necessary stability. This iterative process of refinement led to a design that not only looked sleek but also performed exceptionally well in high-speed conditions. The final aerodynamic model was a testament to the team’s dedication to optimizing every aspect of the drone’s performance.

Once a drone’s built, its performance needs to be tuned by programming all its components to work in sync so that there isn’t a malfunction in the sky. Despite several initial failures during test flights, the team sought the expertise of Chris Raser, a renowned FPV drone specialist. His insights and detailed tuning guides were instrumental in resolving stability issues and fine-tuning the drone’s flight characteristics. This collaborative approach underscored the importance of seeking specialized knowledge and continuously learning from each phase of the project. The resulting improvements were significant, allowing the drone to perform high-speed maneuvers with precision and reliability.

The testing phase was rigorous and demanding, marked by numerous iterations and rebuilds. The drone was 3D printed using the Bambu Lab X1 Carbon printer, which proved to be an excellent tool for creating precise and durable components. Through a series of high-speed runs, the Peregreen 2 eventually achieved speeds of 500 km/h, a milestone that underscored the success of the design and engineering efforts. This achievement was officially recognized by Guinness, solidifying the team’s place in the record books.

Beyond setting a world record, the Peregreen 2 project also focused on capturing stunning cinematic footage. By incorporating a new open canopy for the camera (shown below), the team was able to obtain clear, distortion-free shots. The Insta360 Go 3 camera, known for its small size and lightweight, was integral in capturing high-speed footage. The drone’s performance in endurance tests was equally impressive, managing a flight of 7.5 km at an average speed of 180 km/h. These accomplishments highlight the drone’s versatility and potential for various applications.

The post Record-breaking Drone hit 510km/h speeds, dethroning Red Bull for the World’s Fastest Drone first appeared on Yanko Design.