Tag Archives: 3D-printed

‘Black Panther’ Costume Designer Launches Otherworldly 3D-Printed Handbags

Posted on by

Famous for helping design the jewelry (including Queen Ramonda’s headgear) from the hit film Black Panther, award-winning Australian designer Julia Koerner relies on a combination of nature and computer algorithms to bring her creations to life. Her handbags, available on her website, follow a similar design route, with an aesthetic so out-of-this-world, chances are you’ll think the bags have a life of their own. Designed using algorithms and 3D printed to perfection, Koerner’s handbags are rigid, but visually lightweight, boasting a skeletal design that feels almost alien-like. However, Koerner takes inspiration from life around her, looking at nature for ideas. This particular bag draws from the shape of dried kelp found along the pacific coastline.

Designers: Julia Koerner, Kais Al-Rawi and Emma Sanson

The KELP MINI handbag was created using actual 3D scans of Kelp that were then edited, manipulated, and turned into a handbag-esque form. The handbag is almost entirely made out of 3D printed plastic, using resin-based printing techniques (which helps create flawless glossy surfaces with minimal print lines).

The bags are hinged at the base, with a cleverly detailed clasp on the top created using parts that snap to interlock when the bag is shut. The bag’s chain gets hooked onto details inside the bag, keeping the outer design clean, while allowing the chain to pass through one of the bag’s many openings.

Don’t expect the handbag to store much, given its compact, rigid design. Small items will easily fall out, but otherwise the KELP MINI is perfect for a coin purse, wallet, lipstick, and maybe a pair of sunglasses.

The bag’s immaculate designs are completely printed in sustainable plant based material, with the printers running entirely on solar energy. While Koerner takes heavy inspiration from nature, her reverence extends to protecting her source of inspiration too, ensuring that her products have minimal environmental impact. The handbags are printed in LA for shipping in America, and Vienna for Europe orders. For bags that have minor misprints, Koerner even sells them at a discount, ensuring nothing gets wasted.

The beauty of Koerner’s designs lie in the fact that they look so bizarrely different, you won’t be able to take your eyes off them. Whether it’s the jewlery from Black Panther or any of her other work, Koerner taps into an almost wild side of nature, relying on unconventional curves and organic geometry that bridges the lines between existing and impossible, and between design and art.

The post ‘Black Panther’ Costume Designer Launches Otherworldly 3D-Printed Handbags first appeared on Yanko Design.

3D print your own transforming robots with these downloadable templates

Posted on by

3D printing has already come a long way since it was first introduced in the 80s. It still hasn’t reached the levels where almost every household has one like we now have with regular printers of course. But now we’re seeing consumer-level 3D printers as well as “templates” we can download and print on our own. Even if you only have a basic knowledge of how this technology works, it’s pretty easy to try it out on your own or at least find a tutorial online on how to do it. If you’re a fan of the old school transformers, these downloadable templates will be right up your alley.

Designer: Dr. Operator

Dr. Operator has been publishing 3D model templates on Printables and they’re quirky and interesting, especially if you like toy collectibles. But instead of the usual IP-related collectibles that remain faithful copycats, you get his own take on things like Star Wars’ AT-AT, Scooby Doo’s Mystery Machine, Marvel’s M.O.D.O.K, etc. If you’re a fan of the Transformers series, then you’ll appreciate his latest series of 3D models that take inspiration from our favorite robots, but adding his own style and flair (and back story).

There are currently only two templates in this series but hopefully we get more robots soon. The Ham and Cheese model is a robot that turns into, you guessed it, a ham and cheese sandwich. It was inspired by the designer’s favorite Transformer, Soundwave. The “back story” is that the Ham is an Autobot and the Cheese is a Decepticon and they decide to abandon the fight and just become a sandwich. The Hippie Van Transformer is what exactly the name says it is. There are different toy car brands but the designer says that the Transformers are still the coolest so he created this.

There is still an upcoming 3D model kit that isn’t available yet on Printables but it may just be the coolest. It’s a robot that turns into a telephone headset and may even have a built in Bluetooth module. For kids out there, a telephone is what we used to communicate before there were smartphones. We’re looking forward to what other Transformers templates he’ll be able to come up with eventually.

The post 3D print your own transforming robots with these downloadable templates first appeared on Yanko Design.

World’s First 3D Printed Edible Eel: Sushi Ready

Posted on by

Hot on the heels of 3D-printed salmon comes the world’s first 3D-printed eel, made by Steakholder Foods using its line of 3D meat printers. Its current iteration of eel is plant-based, but it plans to ethically harvested eel cells and cultivate them once “economies of scale allow for price-competitive cell development.” These are fascinating times for the sushi industry!

SteakHolder’s printing process involves printing alternating layers of varied textures to as closely resemble the meat it’s printing as possible. So, it’s not just a solid block of the same texture and flavor. Its printing technology also allows the company to produce meat alternatives using significantly fewer ingredients than others currently on the market.

Above: A filet of grouper being printed.

SteakHolder Foods CEO Arik Kaufman says, “The launch of our printed eel marks a pivotal moment in the seafood industry…This technology is designed to enable partners to generate products on a potential industrial scale of hundreds of tons monthly, not only at lower costs compared to wild eel, but also with the flexibility to create a variety of printed products using the same production line.”

Would you eat 3D-printed eel? I would. As a matter of fact, I want some right now. Ideally, laid atop some rice with wasabi and soy sauce on the side. Great, now I want sushi. But I just had Mexican! I suppose I still have a little room…

[via TechEBlog]

Engineer 3D Prints A Colorful, Functional Toilet

Posted on by

Because great ideas come in all shapes and sizes (and colors), Youtuber Emily The Engineer decided to take it upon herself to see if she could 3D print a functional toilet. Could she? SPOILER: Yes– yes, she could. And I hope that this colorful commode serves as a reminder to us all that if you try hard and believe in yourself, anything is possible. Or you can at least 3D print yourself a toilet.

Due to the size of the toilet, the unit had to be split into numerous blocks for individual printing, and Emily took that opportunity to print the blocks in various fun colors. The result is what appears to be a LEGO toilet, or a Mondrian painting. My bathroom demands it!

Emily attached all the parts to one another using 3D plastic glue and a soldering iron to fuse where necessary. Even the tank float, flapper, and flushing mechanism are 3D printed, although a handful of metal nuts and bolts were required to connect everything.

Unfortunately, after testing, it appeared her design wasn’t strong enough to be attached to a traditional indoor plumbing system. So what did she do? What anybody would — attached wheels, armrests, smartphone charger, cup holders, and added a bidet. Boom — mobile toilet! Goodbye porta-potty, hello sporta-potty!

[via TechEBlog]

Geometric coffee tables use 3D printing robots and recycled plastic to create organic forms

Posted on by

3D printing has come a long way, but unless you’re using industrial printers in large factories, you’re probably limited to creating small designs or just parts of a whole. That, unfortunately, means that creators and makers aren’t able to fully express their ideas and designs, at least not those that involve pieces that can’t fit inside a commercial 3D printer. That said, you don’t have to give up your creative freedom to use an expensive production line if you can put 3D printing robots to smart use, like this sustainable plastic coffee table that is able to form organic geometric forms just by making the robot arm loop round and round.

Designer: Martin Zampach

When people think of 3D printers, they most likely think of those boxy contraptions sitting on tables, with nozzles that quickly run back and forth while oozing out hot plastic material in order to build up a three-dimensional object almost like from thin air. While this is the most common and most convenient kind of 3D printing, it has severe limitations in the size or shape of the object being made, basically anything that can fit the area and height of the printer.

LOOPS is a collection of coffee tables conceived to push the envelope of 3D printing and create objects that are larger than normal without requiring additional hardware. An industrial 3D printing robot pretty much goes round and round to create the base shape, building layer after layer of composite material until the desired form is achieved. This is the process used for creating the base of these tables, allowing the designer to apply different geometric shapes with organic forms that look like they’re literally growing before your very eyes.

The coffee tables are more than just experiments in 3D printing, they are also testaments to beautiful sustainable design. Tabletops are made from 100% recycled plastic that is crushed, melted, and then moulded from used plastic. The 3D printed bases, on the other hand, are made from composite material containing cellulose from responsible forestry. When the tables reach the end of their use, both the base and the top can be recycled or reused to extend their life in a different way.

The LOOPS coffee table collection offers a unique and novel design that pushes the boundaries of 3D printing to produce beautiful shapes and textures that almost resemble traditional ceramic creations. The variety of recycled plastics used gives each tabletop a unique appearance, both in color as well as in texture. The minimalist yet elegant designs make the coffee tables the perfect artistic centerpieces for any space, offering a thought-provoking design that opens your mind to the possibilities of sustainable 3D printing.

The post Geometric coffee tables use 3D printing robots and recycled plastic to create organic forms first appeared on Yanko Design.

Turn your bathroom into a sustainable piece of art with 3D printed tiles

Posted on by

If you’re redesigning your bathroom but you’re bored with the regularly-designed tiles that you see in the market, this 3D printed tile design may be for you. That is, if you don’t mind having some organism looking creatures permanently displayed while you’re taking a bath. It is sustainable and biodegradable so that’s a major bonus if you’re concerned with things like that.

Designer: bioMATTERS

The MYCO-ALGA is an interior tiling system that is made from natural and organic waste that have been upcycled together with actual living organisms. There are different sustainable processes involved in coming up with this including designing them digitally, 3D printing, growing the organisms, enriching them with bio-pigments, fabrication, etc. It begins with the waste materials being ground into a paste-like substrate as a foundation.

Once it has been turned into paste, it is then 3D printed into customized shapes and for two weeks, they are placed and cultivated in a controlled environment so that the mycelium turns into the thing that binds the material together. They are then placed in convection ovens and as they “bake”, they turn into lightweight materials but at the same time, they become strong and rigid. The bio-pigments from the harvested algae which are now gel are then applied to the tiles.

The tiles are definitely unique looking and can be a conversation piece when you have people visit your bathroom. They were designed to specifically look like organisms are crawling all over your space. The mosaic-like design with the non-repeating patterns are visually striking and 100% sustainable.

The post Turn your bathroom into a sustainable piece of art with 3D printed tiles first appeared on Yanko Design.

Meet Guatemala’s First 3D-Printed Earthquake-Resistant House That Was Built In Just 26 Hours

Posted on by

Nowadays almost everything is being 3D printed, so why should architecture be an exception? Many architectural firms have adopted 3D printing as their preferred technique for building structures. And 3D-printed architecture has truly gained a lot of popularity and momentum. It has paved a path for itself in modern architecture. And I mean, no wonder, it has a ton of benefits! It’s a simple, efficient, and innovative technique that lowers the risks of errors, and also manages to save time. 3D printing eradicates a lot of tedious steps during the construction process and simplifies it. And cement company Progreso teamed up with COBOD to build Guatemala’s first 3D-printed building.

Designer: Progreso x COBOD

Guatemala’s first 3D-printed building was recently completed to withstand local seismic activity, allowing it to be earthquake-resistant. The structure was built by merging modern 3D-printing construction techniques with traditional local craftsmanship, for example, the thatched roof. The house was built using COBOD’s BOD2 printer, and the 3D printer extruded a cement-like mixture in multiple layers to from the structure’s shell, according to a pre-planned blueprint.

Quite interestingly the entire printing and building process took only a little over 24 hours. 26 hours were spread over seven days to build the structure which involved completing the concrete shell, and then adding wiring, plumbing, and windows with the help of laborers. The roof of the home is the traditional roof seen all over the region, and it is made from palm thatching. Wooden slats were also added to the building, to promote natural ventilation and create a spacious and airy environment. The building is designed to withstand a severe and strong earthquake!

“The project has successfully taken steps to validate the structural viability of 3D construction printing in a seismic-prone region,” said the press release. “Due to the use of 3D printing, the house features highly organic-shaped walls that would otherwise be extremely expensive, even unfeasible to complete with concrete blocks, the region’s predominant building material. The 3D-printed concrete walls are complemented by a ‘Rancho’ type palm leaves roof. This roof type has been used for generations in Latin America, as it is inexpensive, provides thermal comfort, and is well-suited for seismic regions due to the flexible and lightweight material.”

The structure occupies 527 square feet and is a compact home that can withstand extreme seismic activity while operating as a fully functional and equipped house.

The post Meet Guatemala’s First 3D-Printed Earthquake-Resistant House That Was Built In Just 26 Hours first appeared on Yanko Design.