Author Archives: Sarang Sheth

Remember Aerogel? This insulated outdoor jacket has an aerogel layer, giving you -40°F protection

Posted on by

Anyone who even vaguely remembers the late 2000s remembers Aerogel, the ‘wonder material’ that was 99% air, and had the incredible ability to insulate against high heat or cold because of its thermal absorption properties. Aerogel got all the press back in the day, but didn’t really see much consumer application because of how difficult it was to produce. Cut to the year 2024 and a Tokyo-based company has managed to find a fitting application for Aerogel. Meet SpacePeak, an outdoor jacket that sits on the bleeding edge of technology with its own aerogel insulation layer that can protect you in temperatures as extreme as -40°C (-40°F). What’s more, it has a 3-in-1 design with removable inner layers, allowing you to wear it in regular weather too, and it has over 20 pockets for all your EDC and essentials.

Designer: Tatsuya Dobashi

Click Here to Buy Now: $299 $479 ($180 off). Hurry, only 8/170 left! Raised over $115,000.

SpacePeak has perfected aerogel technology to retain the most heat from your body. From there, heat circulates throughout your whole jacket keeping you warm and dry even in the harshest conditions.

The SpacePeak comes with a two-part design that gives you 3 jackets in one. On the inside, it features a functional puffer jacket, insulated with Aerogel and a thermal layer that helps keep you warm and snug in pretty much any weather. The outer jacket is a waterproof wind-breaker with a hood that helps ensure you stay dry in the rain or during a blizzard. Wear them individually based on what the weather is, or combine them together to give you a jacket powerful enough to brave all the elements. The outer layer is rated 20,000mm waterproof and keeps you from succumbing to rain, storm, sleet, and snow, while the inner aerogel jacket helps build an impermeable barrier between your body temperature and outer temperature.

You can finally ditch your puffy jacket and start wearing something that keeps you warmer with less weight and fluff.

The jacket is rated to protect you in temperatures as low as -40°C (also -40°F), although lab tests show the SpacePeak can easily endure temperatures as low as -196°C (-320°F). While there’s really no place on Earth where humans would endure those temperatures, it’s good knowing that the jacket can handle pretty much the coldest weather possible without giving up. That being said, it’s worth noting that the aerogel doesn’t physically warm you – it creates a thermal barrier between the cold environment and your warm body, so you don’t lose any body heat to the cold outdoors.

Store your laptop or tablet in the back pocket to carry your valuables safely and efficiently.

Chances are that places that hit -40°C aren’t the kinds of places you want to be carrying massive backpacks to either, which is why the SpacePeak packs more than 20 pockets for pretty much all your gear. Strategically placed all across the jacket’s inner and outer surfaces, the SpacePeak has every slot imaginable, with large pockets big enough for iPads, protected pockets for gadgets like cameras and phones, waterproof pockets for bottles and food, and quick-access pockets for keys and money. The 20+ tactical pockets turn your jacket into a backpack of sorts, without all the bulkiness associated with backpacks. Your belongings are strategically placed across the jacket, making them A. accessible, but more importantly B. less likely to weigh your shoulders down because of the distributed weight. Besides, who wants to rummage through a backpack in sub-zero temperatures, right?!

The enhanced 20,000 mm waterproofing doesn’t just stop the rain from getting to you, Its waterproofing makes it wind resistant, and it easier to brush dirt, snow, mud and other muck off your jacket.

That being said, you’d expect a jacket with this laundry-list of features to be extremely bulky, but the implementation of aerogel allows the SpacePeak to be thinner and lighter than your average down jacket. Down (or feathers) works exactly like aerogel, using trapped air to create a thermal barrier – however, what down does with an inch of thickness, the Aerogel does with 1/10th the amount, giving you an extreme-weather jacket that doesn’t turn you into the Michelin man or a human marshmallow because of all that padding.

The aerogel used within the SpacePeak was developed by S. Kistler, a company founded after the American scientist and chemical engineer credited with inventing the material in the first place. The aerogel, despite being highly insulating, is breathable, durable, and will retain its thermal properties even after a 100 washes (even with regular use the jacket can probably use a wash once a year). The SpacePeak comes in 4 sizes, ranging from M to 4XL, with a starting price of $299 and global shipping – just in case you want your jacket dispatched to the Arctic Circle!

Click Here to Buy Now: $299 $479 ($180 off). Hurry, only 8/170 left! Raised over $115,000.

The post Remember Aerogel? This insulated outdoor jacket has an aerogel layer, giving you -40°F protection first appeared on Yanko Design.

Remember Aerogel? This insulated outdoor jacket has an aerogel layer, giving you -40°F protection

Posted on by

Anyone who even vaguely remembers the late 2000s remembers Aerogel, the ‘wonder material’ that was 99% air, and had the incredible ability to insulate against high heat or cold because of its thermal absorption properties. Aerogel got all the press back in the day, but didn’t really see much consumer application because of how difficult it was to produce. Cut to the year 2024 and a Tokyo-based company has managed to find a fitting application for Aerogel. Meet SpacePeak, an outdoor jacket that sits on the bleeding edge of technology with its own aerogel insulation layer that can protect you in temperatures as extreme as -40°C (-40°F). What’s more, it has a 3-in-1 design with removable inner layers, allowing you to wear it in regular weather too, and it has over 20 pockets for all your EDC and essentials.

Designer: Tatsuya Dobashi

Click Here to Buy Now: $299 $479 ($180 off). Hurry, only 8/170 left! Raised over $115,000.

SpacePeak has perfected aerogel technology to retain the most heat from your body. From there, heat circulates throughout your whole jacket keeping you warm and dry even in the harshest conditions.

The SpacePeak comes with a two-part design that gives you 3 jackets in one. On the inside, it features a functional puffer jacket, insulated with Aerogel and a thermal layer that helps keep you warm and snug in pretty much any weather. The outer jacket is a waterproof wind-breaker with a hood that helps ensure you stay dry in the rain or during a blizzard. Wear them individually based on what the weather is, or combine them together to give you a jacket powerful enough to brave all the elements. The outer layer is rated 20,000mm waterproof and keeps you from succumbing to rain, storm, sleet, and snow, while the inner aerogel jacket helps build an impermeable barrier between your body temperature and outer temperature.

You can finally ditch your puffy jacket and start wearing something that keeps you warmer with less weight and fluff.

The jacket is rated to protect you in temperatures as low as -40°C (also -40°F), although lab tests show the SpacePeak can easily endure temperatures as low as -196°C (-320°F). While there’s really no place on Earth where humans would endure those temperatures, it’s good knowing that the jacket can handle pretty much the coldest weather possible without giving up. That being said, it’s worth noting that the aerogel doesn’t physically warm you – it creates a thermal barrier between the cold environment and your warm body, so you don’t lose any body heat to the cold outdoors.

Store your laptop or tablet in the back pocket to carry your valuables safely and efficiently.

Chances are that places that hit -40°C aren’t the kinds of places you want to be carrying massive backpacks to either, which is why the SpacePeak packs more than 20 pockets for pretty much all your gear. Strategically placed all across the jacket’s inner and outer surfaces, the SpacePeak has every slot imaginable, with large pockets big enough for iPads, protected pockets for gadgets like cameras and phones, waterproof pockets for bottles and food, and quick-access pockets for keys and money. The 20+ tactical pockets turn your jacket into a backpack of sorts, without all the bulkiness associated with backpacks. Your belongings are strategically placed across the jacket, making them A. accessible, but more importantly B. less likely to weigh your shoulders down because of the distributed weight. Besides, who wants to rummage through a backpack in sub-zero temperatures, right?!

The enhanced 20,000 mm waterproofing doesn’t just stop the rain from getting to you, Its waterproofing makes it wind resistant, and it easier to brush dirt, snow, mud and other muck off your jacket.

That being said, you’d expect a jacket with this laundry-list of features to be extremely bulky, but the implementation of aerogel allows the SpacePeak to be thinner and lighter than your average down jacket. Down (or feathers) works exactly like aerogel, using trapped air to create a thermal barrier – however, what down does with an inch of thickness, the Aerogel does with 1/10th the amount, giving you an extreme-weather jacket that doesn’t turn you into the Michelin man or a human marshmallow because of all that padding.

The aerogel used within the SpacePeak was developed by S. Kistler, a company founded after the American scientist and chemical engineer credited with inventing the material in the first place. The aerogel, despite being highly insulating, is breathable, durable, and will retain its thermal properties even after a 100 washes (even with regular use the jacket can probably use a wash once a year). The SpacePeak comes in 4 sizes, ranging from M to 4XL, with a starting price of $299 and global shipping – just in case you want your jacket dispatched to the Arctic Circle!

Click Here to Buy Now: $299 $479 ($180 off). Hurry, only 8/170 left! Raised over $115,000.

The post Remember Aerogel? This insulated outdoor jacket has an aerogel layer, giving you -40°F protection first appeared on Yanko Design.

Only 5 of these Alfa Romeo GTA Custom Restomods will be made

Posted on by

Totem Automobili, known for its impeccable craftsmanship and innovative automotive creations, has once again captured the essence of automotive history with the unveiling of its latest masterpiece: the GTAmodificata. This limited edition marvel pays homage to the legendary Alfa Romeo GTAm, blending classic aesthetics with cutting-edge technology to redefine the boundaries of automotive excellence.

Originally produced in limited quantities from 1965 to 1969, the Alfa Romeo GTA has always held a special place in the hearts of enthusiasts worldwide. Totem Automobili’s passion for reviving automotive icons shines through in their GTA-based restomods, and the GTAmodificata takes this dedication to the next level.

Designer: Totem Automobili

The GTAmodificata has a potent 3.2-liter twin-turbocharged V6 engine for a heart, meticulously crafted by Italtecnica Engineering. Boasting an impressive 810 horsepower and 538 ft-lbs of torque, this powerhouse propels the car from 0 to 60 mph in a blistering 2.6 seconds, with a top speed exceeding 186 mph. Yet, performance isn’t the only hallmark of this masterpiece. Weighing in at just 2,414 pounds, the GTAmodificata achieves a remarkable power-to-weight ratio, delivering exhilarating performance while retaining impeccable handling dynamics.

Crafted around a custom-built carbon-fiber monocoque, the GTAmodificata seamlessly blends lightweight construction with structural rigidity, resulting in a driving experience that’s as thrilling as it is refined. Custom-engineered billet aluminum double wishbone suspension units and R53 dampers ensure precise handling and stability, while bespoke carbon fiber bodywork, adorned with a metallic carbon finish, exudes timeless elegance.

The interior of the GTAmodificata features custom seats, instrumentation, and dash, trimmed in exquisite leather and Alcantara, enveloping occupants in comfort and style. Carbon fiber accents throughout the cabin underscore the car’s performance-focused ethos, while advanced LED lighting adds a modern flair.

Limited to just five units worldwide, the Totem Automobili GTAmodificata is easily one of the most exclusive cars we’ve featured on this website. Priced at €1,100,000 (~$1,203,000), this masterpiece represents a pinnacle of automotive engineering and design, surpassing its predecessors in both performance and prestige.

The post Only 5 of these Alfa Romeo GTA Custom Restomods will be made first appeared on Yanko Design.

Apple AirPods Max get a USB-C port thanks to this clever engineering hack

Posted on by

Ken Pillonel takes consumer satisfaction a little too seriously. Famous for hacking previous versions of the AirPods to give them USB-C ports and make them more repairable, Pillonel has now turned his sights to the AirPods Max (which hasn’t received an update in over 3 years, as he points out). The regular AirPods and even the iPhone have both made a concerted shift to USB-C, but Apple surprisingly forgot to upgrade their flagship headphones, leaving it in the lightning era.

No stranger to hacking (ahem, upgrading) Apple’s accessories, Pillonel decided to build a USB-C AirPod Max before Apple did. The video above takes us through the journey, showing how Pillonel disassembled the existing AirPods Max, designed a new PCB with a USB-C port, and mounted it (with relative ease) in the headphones, giving them the upgrade they severely needed. The best part, Pillonel even sells his PCBs on his own website, encouraging other people to hack their AirPods Max too and upgrade them to USB-C.

Designer: Ken Pillonel

The AirPods Max debuted in December 2020, which means they’re one of the only mainstream Apple products to not have received a major upgrade in years (they were announced even before the AirTag). Realizing that now was a better time than ever, Pillonel decided to take his AirPods Max for a spin, cracking them open to see the assembly inside and whether it would be easy to upgrade it. Luckily, the lightning port was relatively easy to upgrade without any invasive procedures to the headphone’s body itself. Apple designed the port with a removable metal lip that allowed it to magically become wider (it’s almost as if Apple was preparing for this transition in advance), and knocking the lip out made the hole perfectly sized for a USB-C port.

Pillonel simply unplugged the lightning connector from the existing motherboard and designed a new one that housed the USB-C port. He shared the new PCB design on PCBWay, and had the circuit boards sent to him. An older iteration featured a single-piece PCB that worked, but was susceptible to wear and tear, so Ken redesigned the PCB with a flexible ribbon cable, allowing it to bend without applying pressure on certain parts. The new PCB is available in Pillonel’s shop for 39.9 CHF ($45.3 USD).

The older PCB was prone to wear and tear if used roughly

A flexible ribbon cable on the new PCB made it much more resistant to regular daily usage

The upgraded AirPods Max (Pillonel calls it the AirPods Max 2.0) only has the one design upgrade, although knowing Pillonel, he’ll soon make the entire thing repairable and probably even figure out how to replace batteries on them. You can visit his YouTube channel here, or read our coverage on his other interesting projects here.

The post Apple AirPods Max get a USB-C port thanks to this clever engineering hack first appeared on Yanko Design.

LEAKED: Apple’s Notch Explorations Show What We Could Have Gotten Instead Of The Dynamic Island

Posted on by

In the six full years that it took to transition from the notch to the dynamic island, I’m sure the Apple team was hard at work figuring out what the next logical step would be. Under-screen cameras had their caveats (camera quality would suffer), and bezels were an absolute no-go. The iPad could get away with a notch built into its relatively thin bezels, but the same bezel thickness couldn’t be carried forward to the significantly smaller iPhone. Then in 2022, Apple revealed the successor to the notch, a more detached notch that they called the Dynamic Island. Its benefit? That it could shapeshift into different shapes and sizes depending on notifications, resulting in a notch that didn’t feel like a compromise.

But information obtained by the folks at MacRumors provides a rare peek behind the curtain of Apple’s design process, and more importantly, what we COULD have gotten instead of the dynamic island. The concepts range from acceptable to downright absurd, with some proposing two notches instead of one! Here’s a look at the 6-year worth of brainstorming at Apple’s design offices before they transitioned from the notch to their now ubiquitous Dynamic Island.

The notch made its first appearance in 2017 with the iPhone X, a commemorative phone to mark the product line’s 10-year anniversary. It soon became a meme, and then a standard fixture for iPhones moving forward, but needless to say, Apple wanted to find a better solution. The first solution was in the form of an extra notch to make the existing notch look more appealing. Visible in the image above (left), this notch would effectively be your control center, but would disappear when not in use. Let’s be objectively clear, I’m glad Apple didn’t implement this because it’s downright hideous. It creates a uniquely displeasing screen shape (even if temporarily), and is an ergonomic nightmare for left-handed people. The second alternative was to black out parts of the screen entirely to hide the notch (top right) – a feature that looked much more acceptable visually, but was a step back for Apple’s zero bezel effort. It, however, would translate to battery savings because the top part of the screen on either side of the notch would remain black for most of the time.

Finally, the company arrived at the dynamic island, but struggled with finding the right way to make it ‘dynamic’. Initial explorations would show dot-shaped icons emerging from the island when in use, while others showed the island transforming into a large block when increasing or decreasing the volume before returning to its original size. This pretty much put Apple on the right track, but they weren’t there yet. Another concept showed the entire island turning into your control center (I somewhat like this if I’m being absolutely candid), while one concept gave the island a second skin in the form of a colored window.

Finally, Apple figured out how to have the island dynamically transform into widgets based on apps and processes, offering something much more elegant than the concepts shown here. However, that’s the nature of the design process, whether you’re a small startup or a trillion-dollar company. You try, ideate, evaluate, fail, and go back to the drawing board over and over till you find something that works… even if it takes six damn years. In hindsight, I’m glad they took that long. I’d take a dynamic island any day over that godawful secondary side notch!

Image Credits: MacRumours

The post LEAKED: Apple’s Notch Explorations Show What We Could Have Gotten Instead Of The Dynamic Island first appeared on Yanko Design.

This 5G eBike has a built-in action camera and infotainment system: Orbic 5G eBike Hands-On at MWC 2024

Posted on by

Amidst the bustling corridors of the 2024 Mobile World Congress in Barcelona, sustainable innovation company Orbic has unveiled a device that will radically alter last-mile and intra-urban commutes forever: the world’s first 5G-enabled eBike, equipped with AI for object avoidance and collision detection.

Designer: Orbic

Orbic’s leap into the eBike sector practically reshapes how we perceive mobility, safety, and connectivity on two wheels. “Introducing Orbic’s 5G e-Bike at MWC Barcelona is part of our innovation pipeline that implements advanced technology to expand connectivity and enhance user experiences,” said Mike Narula, President and CEO of Orbic. “By integrating 5G connectivity and AI technology, we aim to redefine the riding experience, making it safer, more connected, and environmentally responsible whether on city streets, in suburban neighborhoods or the challenging terrain of mountain trails. The 5G e-Bike represents a significant leap forward in electronic mobility, and we are excited about bringing this new technology to cities across the globe.”

Central to the eBike’s design is its AI-powered avoidance detection system, featuring a sensor with a 140-degree field of view at the rear, which actively monitors for potential hazards and alerts riders through audible and visual warnings. This focus on safety is further supported by the eBike’s array of cameras: a 64MP front-facing camera for capturing and livestreaming (yes, the Orbic bike has its own built-in action camera!), an 8MP camera on the front display ideal for video calls, and a 2MP rear camera dedicated to enhancing safety through collision avoidance and object detection.

The eBike’s frontal camera array

A rear camera helps with vehicle detection

Stuck in traffic? The touchscreen can be used for entertainment too!

Additionally, the eBike boasts a 7-inch, all-weather touchscreen display that provides riders with essential information such as battery status, speed, and navigation data, ensuring attention remains on the road. The eBike’s 5G connectivity not only minimizes lag for a responsive user experience but also enriches the riding experience by enabling features like live streaming, trail sharing, bike-to-bike communication, and real-time navigation.

Orbic’s 5G eBike reveal at MWC 2024 represents a seismic shift in eco-friendly transportation, operating without fossil fuels and emitting no carbon, aligning with the company’s dedication to sustainable technology development. This approach offers riders a guilt-free mode of transportation that doesn’t compromise on innovation or performance.

The post This 5G eBike has a built-in action camera and infotainment system: Orbic 5G eBike Hands-On at MWC 2024 first appeared on Yanko Design.

World’s First AR Glasses that correct Partial Retinal Blindness: Hands-on with Eyecane AR at MWC 2024

Posted on by

I’ve always said that great technology doesn’t cater only to the needs of the dominant 95%, it also factors in the needs of the often neglected 5%. To that end, AR technology is great, but it hasn’t been applied in a way that benefits the 5th percentile – and Cellico wants to change that. The medical-tech company unveiled the Eyecane AR glasses at MWC, the world’s first augmented reality device designed to correct age-related macular degeneration (AMD).

Designed to look and feel like your standard sunglasses, the Eyecane AR helps people with retinal disease see clearly. A 4K camera at the center of the glasses records the world, feeding media into a tiny projected display within the Eyecane AR’s lenses. AMD causes blind spots within people’s vision, but the Eyecane AR’s cameras help fill in those blind spots with digitally captured imagery in real time, helping people see fully and clearly again.

Designer: Cellico

A disease that affects as many as 1 in 200 people by the time they reach 60, going up as high as 1 in 5 people by the time they hit their 90s. The affliction, caused by the degeneration of the macula (the central part of the retina) results in blurry or sometimes even no vision in the center of your eye. Think of a large black dot in otherwise relatively clear vision. Given that a lot of the important things we see find themselves in this central zone, people with AMD can have a tough time looking at objects, identifying people, and navigating scenarios. Cellico’s solution is incredibly simple – have a camera capture whatever is in that gap, and display it in the corner of your eye, where you can still see things relatively clearly. Creating somewhat of a picture-in-picture effect, Eyecane AR allows people with AMD to regain vision in their macular region simply by having a camera capture it and display it in another part of their field of view.

A snap-on sunshade helps people see clearly in bright settings too

By harnessing the power of a compact 4K 20MP camera seamlessly integrated into smart glasses and complemented by an intuitive mobile app, Eyecane AR captures and processes real-time images with precision, even applying optical image stabilization. These images are then projected onto an augmented reality display in Full-HD, effectively shifting central vision to the peripheral field of view. This groundbreaking approach not only restores clarity but also rekindles independence for those navigating the challenges of AMD.

simulates how people with AMD perceive the world, and how the Eyecane AR can help fill in the gap with a PIP on the left side.

Moving the PIP to the center of the screen shows what images would look like for people with regular vision.

The beauty of the Eyecane AR lies in the fact that it can be used right out of the box without a hospital visit. The Eyecane app has a built-in scotometry program that analyzes your vision for you, pinpointing the blind spot or the problematic area in your vision. The app then helps the AR glasses’ camera calibrate and focus on that region, capturing the image and displaying it in a corner of your peripheral vision. The entire process takes mere minutes, and helps quickly restore macular vision simply by relying on the inherent properties of augmented reality displays!

Key Features of Eyecane AR:

  • 4K camera with Optical Image Stabilization (OIS) embedded in AR glasses
  • Mobile app featuring a customized image-processing engine
  • Full HD Reflective Freeform crystal Lens offering a Field of View (FoV) of 40°
  • Voice control functionality for seamless user interaction
  • Electric Auto Sunshade coated with an LC film, ensuring optimal visual comfort in diverse lighting conditions
  • Lightweight construction, crafted from Titanium and Ultem materials, prioritizing comfort and wearability

The post World’s First AR Glasses that correct Partial Retinal Blindness: Hands-on with Eyecane AR at MWC 2024 first appeared on Yanko Design.

Dynavisual Hands-On at MWC 2024: Flexible Displays found their most exciting application yet

Posted on by

If you’ve browsed through the internet long enough, you’ve seen videos of Taylor Swift or Coldplay concerts, with the entire audience lighting up thanks to LED wristbands that respond to the concert’s lighting and music setup. Well, Dynavisual wants to take that technology a few steps further. The company is working on a set of flexible high-visibility LED ‘billboards’ that can be worn on caps, clothes, bags, etc. The LEDs can be customized to display messages, stats, and brand logos (pretty standard stuff), but what really makes them exciting is their ability to be paired together by the thousands, potentially turning an entire crowd into a massive display. Dubbed ‘Swarm Technology’, Dynavisual paints an incredibly exciting future where massive arenas come to life at concerts or sports games, displaying images, logos, or even massive graphics – just imagine the entire stadium displaying the word ‘GOAL’ when Messi scores. The best part? These Dynavisual displays could then go back to being individual units once the game is over, with each person carrying their display back home and using it like they normally did.

Designer: Dynavisual

Flexible displays have been around for over a decade now, but calling the Dynavisual Pad a flexible display is a bit of a stretch. In theory, it passes the bar, but practically, you’re also looking at a pad that has just 512 pixels, arranged in a 16×32 array. Standard OLED displays like the ones in your phone have millions of pixels per display, but the folks at Dynavisual don’t want you to make that comparison. If looked at independently, the Dynavisual Pad is an entirely different product. It’s designed with a robust construction that can be worn across your body or on your head, has multi-directional flexibility across both X and Y axes, and those individual pixels may give the display an incredibly low resolution, but they’re exceedingly bright. For comparison, the iPhone has a peak outdoor brightness of 2000 nits – the Dynavisual Pad outputs a comfortable 6000 nits, making it up to 3x brighter than traditional phone displays. The reason is simple – the low resolution and high brightness aid visibility over distances of multiple feet, whereas a smartphone display is practically unusable beyond 6-7 feet.

Showcased at MWC 2024, the Dynavisual team is bringing attention to how capable its Pad is. Each Pad is roughly the size of a large phone, has visibility in bright daylight, and boasts a flexible design thanks to ridges in the back that allow it to easily bend in multiple directions, making it perfect for wearing on your person. The device is made to be lightweight, allowing you to wear it on a cap, in a hoodie/jacket, or even on a bag, and it has its own built-in battery. Details on the battery life were unclear, but given that the device has just over 500 LEDs to power, it’s much more power-efficient than your smartphone.

The applications for the Dynavisual Pad are perhaps the most exciting bit as far as the product goes. There’s an obvious use-case in branding/marketing, with the pad accepting logos, messages, and branding elements, but Dynavisual sees the Pad as being a great communication element beyond the narrow marketing approach. It could be used by safety personnel to help deliver messages/guidance, or it could even be used in a personal capacity, perhaps by a cyclist looking to let drivers behind know whether they’re turning left or right (or braking). To that end, the Dynavisual Pad is a pretty smart device. It packs a whole slew of sensors, including GPS, Bluetooth, WiFi, Infrared, and even voice input.

The 6000-nit LEDs are bright enough to shine through thin fabrics too, allowing you to easily conceal them into clothing.

However, things get truly exciting when multiple Dynavisual Pads come together at the same venue. The company has developed a unique protocol that allows multiple Dynavisual Pads to sync together, becoming a swarm or hive-mind. The technology is best displayed within stadiums and arenas, as organizers can command multiple Dynavisual Pads together, turning them into a massive intelligent display that relies on hundreds if not thousands of pads to work as individual pixels. Imagine an entire stadium audience erupting into colors and displaying the score every time there’s a goal (or a touchdown), or lighting up with brand messages during an ad break. Unlike with current LED bands used in concerts that rely on a combination of WiFi and radio frequencies, Dynavisual’s Swarm Technology operates differently. For starters, with existing solutions, LED bands are owned by organizers, distributed to audiences at venues, and collected once the event is over. That isn’t a concern with the Dynavisual Pad, as users can bring in their own Pad devices into a venue and have it automatically sync up with the event’s light and sound system. Moreover, while current LED bands can only display swathes of colors and vague shapes, Dynavisual’s team has managed to figure out how to display images – a feat that’s incredibly tricky because organizers will need to know where every single Pad device is located, and send specific signals to them.

The application of that widespread swarm technology, however, doesn’t translate well to a hands-on demo with just one or two units on display. It’s also a challenge to explain the product to people attending the Mobile World Congress, because there’s a knee-jerk reaction to then compare it to a mobile – which the Dynavisual Pad is NOT. That being said, the swarm technology looks promising, as the visuals quite literally paint a vivid picture… although with massive concerts, tournaments, and large-scale sporting events like the Olympics, the Dynavisual Pad has an audience practically ripe for the picking!

The post Dynavisual Hands-On at MWC 2024: Flexible Displays found their most exciting application yet first appeared on Yanko Design.

If the Apple Vision Pro and the Google Glass had a baby, these AR glasses would be it…

Posted on by

Showcasing their tech at the Mobile World Congress, Everysight is riding the new AR (or should we call it Spatial) wave with the Maverick, their small, sleek, and stylish glasses that challenge the bulky mixed reality glasses and headsets we see today with something so close to regular glasses, you wouldn’t be able to tell the difference. Designed with a projected display that lets you see data and metric overlaid on the existing world, the Maverick uses an entire slew of sensors to track position, orientation, and head-tilt to ensure that digital elements remain in your line of sight (LOS) and correctly oriented. In fact, the Maverick even bagged multiple awards last year, including the iF Design Award and the Red Dot Award.

Designer: Everysight

Unlike most AR headsets that can make you look a little dystopian when walking down the streets or sitting in a subway (we’re looking at you, Vision Pro wearers), the Maverick stands at the intersection of great tech and fashion. Weighing in at under 47 grams, these glasses boast a sporty, ergonomic frame that promises comfort for all-day wear, a crucial consideration for devices intended to be part of our daily lives. This comfort does not come at the expense of durability or style, making them a versatile accessory suitable for any occasion.

AR glasses are only as good as their displays (something that most Vision Pro users will swiftly point out – which is why the Maverick impresses with its crisp, high-contrast visuals despite its tiny package. Utilizing a Sony Color microOLED display, it delivers stunning visuals characterized by vibrant colors and sharp details. The high-brightness display guarantees an optimal viewing experience in both indoor and outdoor settings, a testament to the glasses’ adaptability and user-centric design.

Ease of use is at the forefront of the Maverick design, with an intuitive interface that allows users to navigate and control features through simple gestures. This user-friendly approach is further enhanced by advanced sensors like a 3D accelerometer, gyro, and magnetometer, which provide accurate line-of-sight tracking for an immersive augmented reality experience.

Battery life is a perennial concern for wearable technologies, and here, Maverick impresses with over 8 hours of continuous operation. This endurance is complemented by efficient power management, ensuring that the glasses support a day’s worth of activities without needing a recharge. Such longevity is essential for users who demand reliability from their smart devices.

User interface and interaction are streamlined for ease of use. Maverick features an intuitive interface that allows for effortless navigation and control through simple gestures. This ease of use is further enhanced by the inclusion of a 3D accelerometer, gyro, and magnetometer, providing accurate line-of-sight tracking that enriches the augmented reality experience by aligning virtual objects with the real world seamlessly. Moreover, the Maverick glasses are designed with inclusivity in mind. They offer an RX solution with personalized lenses tailored to individual prescriptions, ensuring that users with varying visual needs can enjoy the benefits of smart eyewear without compromise.

Connectivity is robust, with Bluetooth 5.2 ensuring seamless pairing with a wide range of devices, including iOS and Android smartphones, as well as Apple Watch and Android Wear. This connectivity underpins the Maverick’s versatility, making it a central hub for notifications and digital interactions on the go.

In the box, users will find everything needed to start their journey with Maverick: tinted removable visors, a charging cable, a carrying case, a pouch, a cleaning cloth, and interchangeable nose pieces. Everysight is selling a developer edition of the Maverick for $399, although it’s unclear when the public rollout will begin, and what the price will be for regular consumers.

Everysight’s Maverick glasses represent a significant advancement in smart eyewear, proving that it’s possible to stay stylish while benefiting from the latest in wearable technology. They set a new benchmark for combining practicality with elegance, ensuring users can stay connected in a visually compelling, productive, and convenient manner. If these glasses could brew coffee, we might never find a reason to take them off.

The post If the Apple Vision Pro and the Google Glass had a baby, these AR glasses would be it… first appeared on Yanko Design.

Whopping 28,000mAh Energizer phone unveiled at MWC 2024 with a week-long battery life

Posted on by

Battery Saver Mode? What’s that??

Meet the Energizer Hard Case P28K smartphone from Avenir Telecom. I hesitate to call it a smartphone because it’s pretty much a brick with a screen… but this smart brick does have a pretty incredible spec to boast about. This device is a behemoth in the battery department, boasting a staggering 28,000mAh capacity that promises to last a regular user an entire week on a single charge. It’s a follow-up to their previous 18,000mAh model from 2019, marking a significant leap in battery size and, implicitly, in user independence from power outlets.

For context, a 28,000mAh battery is roughly 9x more than your average smartphone, which has an average of around 3000mAh. That translates to much more battery capacity, stretching to a week (or maybe more) with regular use… but it also leads to, well, that massive brick-ish format. The Energizer Hard Case P28K measures a staggering 27.8mm thick (that’s nearly three smartphones thick) and weighs a whopping 570 grams (over 20 ounces). I pity the fool who texts with this in bed and accidentally drops it on their face. That being said, the phone is at least rated IP69 for dust and water resistance…

The 18,000mAh Energizer Phone from 2019 (above), versus the P28K smartphone (below)

Fast charging at 33W is also a welcome feature, considering you don’t want to spend 5-6 hours topping off the entire battery. However, details regarding the full charge time remain unspecified, raising questions about the practicality of recharging such a large battery. The phone’s specifications are modest, with no 5G support and a processor that won’t turn heads. Yet, with 8GB of RAM, 256GB of storage, a trio of rear cameras, Android 14, and a sizable 6.78-inch 1080p LCD display, it covers the basics well enough for users whose primary concern isn’t cutting-edge tech but battery life.

Scheduled for release in October at a price of €249.99 ($271.37 USD), the P28K positions itself as a unique offering in the smartphone market. However, it’s notable that it won’t be available in the US, a decision that may reflect market research or regulatory challenges, but it certainly raises curiosity about the global distribution strategy and target audience for such a niche product.

The post Whopping 28,000mAh Energizer phone unveiled at MWC 2024 with a week-long battery life first appeared on Yanko Design.