Author Archives: Ida Torres

Leave your helmet on your bike securely with this prototype contraption

Posted on by

During the pandemic, one of the things that became a “trend” and has actually continued to this day is that more people are biking their way to and from their place of work. We’re seeing a lot of products catering to this market segment and there’s still a lot of room to grow as we look towards more sustainable ways of commuting. Safety is also a major concern for those riding bicycles and motorcycles so we see people carrying helmets around but it’s not always the most convenient thing.

Designer: Eliès Hamzaoui

To solve the problem of carrying around a bulky helmet, an engineer created a prototype for something called an OBH or an On Board Helmet system. The idea is to leave the helmet with your bike so you don’t have to carry it around but also without fear of it getting stolen. It is made up of the helmet itself called the Unicity and a Jorj unit which is bolted to your bike frame. The unit also has a built-in anti-theft alarm, hence the secure part.

The locking and unlocking of the helmet is actually made through an app. You don’t have a physical key so the unit needs to have Bluetooth and battery power, adding to the bulk. It is technically more secure but also a bit inconvenient for times when your smartphone may not be working. The alarm itself is activated only with prolonged movements and not the mere jostle of the bike so you don’t have to worry about accidental alarms.

While it may be more convenient to leave the helmet on your bike, it can also add to the bulk of it since this contraption seems a bit heavy because of the features mentioned. There’s always room for improvement though so hopefully we can get a better prototype for this eventually. The initial target market for this are the bikeshare companies but it can eventually appeal to the general bike-using public, provided the design is improved.

The post Leave your helmet on your bike securely with this prototype contraption first appeared on Yanko Design.

Minimalist aesthetic lamp uses repurposed waste for circular production

Posted on by

According to most existing research, around 60% of discarded materials from homes and businesses in the U.S end up in landfills or are incinerated. Of course there are those who have started segregating their trash and have actually recycled them or sent materials to recycling centers. Of course that’s still a very small percentage compared to those who are just not conscious about their consumption and waste cycle. Fortunately for the earth, there are companies whose main purpose is to come up with products that can address these “waste and pollution challenges” by using circular production.

Designer: Enkei

One such company is a Swedish company called Enkei which refers to itself as a “circular startup” as they aim to change the way we create products from the materials used to how they are actually manufactured. Their very first product is the Reminder (001) Lamp which is both functional and aesthetic but more importantly is majorly made from repurposed waste. The movable textile shade is made from various repurposed materials including high-end fashion deadstock, scrap-based wire, recycled bio-plastics, and 3D-printed fossil-free steel.

The lamp design itself is made up of two contrasting shapes that fit into each other like puzzle pieces. The lamp shade itself can be adjusted as well. It gives off a minimalist vibe that can fit right into your space with its space gray, white and luminous colors. It can look like a simple art piece if not used as a lamp but it also gives off a smart speaker vibe reminding us of Google Home speakers. But of course the selling point of this product is how it is produced with all the circular materials while still maintaining quality and design since of course you’d want a lamp to function as a lamp.

Enkei has also developed its own alternative to the usual concrete materials used in construction. ReCeramix uses ceramic waste from construction sites instead of the sand that is used to create concrete. The Reminder (001) Lamp will be unveiled at the Stockholm Design Week this week although you can already sign up to be waitlisted to buy the lamp.

The post Minimalist aesthetic lamp uses repurposed waste for circular production first appeared on Yanko Design.

3D print your own transforming robots with these downloadable templates

Posted on by

3D printing has already come a long way since it was first introduced in the 80s. It still hasn’t reached the levels where almost every household has one like we now have with regular printers of course. But now we’re seeing consumer-level 3D printers as well as “templates” we can download and print on our own. Even if you only have a basic knowledge of how this technology works, it’s pretty easy to try it out on your own or at least find a tutorial online on how to do it. If you’re a fan of the old school transformers, these downloadable templates will be right up your alley.

Designer: Dr. Operator

Dr. Operator has been publishing 3D model templates on Printables and they’re quirky and interesting, especially if you like toy collectibles. But instead of the usual IP-related collectibles that remain faithful copycats, you get his own take on things like Star Wars’ AT-AT, Scooby Doo’s Mystery Machine, Marvel’s M.O.D.O.K, etc. If you’re a fan of the Transformers series, then you’ll appreciate his latest series of 3D models that take inspiration from our favorite robots, but adding his own style and flair (and back story).

There are currently only two templates in this series but hopefully we get more robots soon. The Ham and Cheese model is a robot that turns into, you guessed it, a ham and cheese sandwich. It was inspired by the designer’s favorite Transformer, Soundwave. The “back story” is that the Ham is an Autobot and the Cheese is a Decepticon and they decide to abandon the fight and just become a sandwich. The Hippie Van Transformer is what exactly the name says it is. There are different toy car brands but the designer says that the Transformers are still the coolest so he created this.

There is still an upcoming 3D model kit that isn’t available yet on Printables but it may just be the coolest. It’s a robot that turns into a telephone headset and may even have a built in Bluetooth module. For kids out there, a telephone is what we used to communicate before there were smartphones. We’re looking forward to what other Transformers templates he’ll be able to come up with eventually.

The post 3D print your own transforming robots with these downloadable templates first appeared on Yanko Design.

Portable loom lets you weave and carry your craft wherever you are

Posted on by

When you’re waiting in line at the bank or having a long commute or you’re in between work things and you have time on your hands, the tendency for most of us is to just browse our smartphones. But if you’re looking for something more productive to do, you can always journal, read a book, or do some arts and crafts to keep your hands busy and enhance your creativity. If you’ve always wanted to take up weaving but don’t have space for an actual loom in your house, this tiny, portable one may be the next best thing.

Designer: Lauren Puchowski

During the pandemic, Puchowski came up with the boomloom, which is basically a portable loom. It’s something that both newbies and master weavers can find useful especially if they want to bring their craft wherever they’re going. She also wanted to make weaving something that’s more “intuitive and expressive” and having something that’s accessible to everyone, not to mention handy, is one step towards that. It looks like a toy at first but it can actually be used to create patches, sketches, multiples or to test out some color combinations and designs. There are two size options: the medium and the slightly smaller mini.

The loom is made from six parts using aluminum, beech, and maple. Surprisingly, it doesn’t use any screws or fasteners. Using it seems pretty easy even if you don’t have any experience in using the regular loom. You just turn the knobs to rotate the bar and it will automatically move the alternate warp threads up and down. There are hidden tabs that are able to stop the bar where you need it to stop while the slits hold the yarn securely. Because of its size, you can do your weaving in your hands, on your lap, or on a table.

The boomloom (still patent pending) is assembled in the designer’s workspace but she has been able to create it for people from all over the world. It is also now available at the Cooper Hewitt Museum Shop which is housed at the Andrew Carniegie Mansion in New York.

The post Portable loom lets you weave and carry your craft wherever you are first appeared on Yanko Design.

Vintage-looking desk clock is handmade with brass and copper materials

Posted on by

Time-telling has become one of those things we take for granted since we only have to look at our computer or our smartphones or our smartwatches to find out the current time. Sure there are still some places that have actual wall clocks or desk clocks but even those have become few and far between. It’s also rare now for people to collect unique-looking clocks but for those who actually do it, there is a “rare find” clock that you can find on Etsy if you can spare around $900.

Designer: Sergey

If you’re very much into hand crafted stuff that looks pretty unique and classic, the Nixei tube vintage clock may interest you. It looks like something that would have fit in during the Victorian era in a 19th century home. Its design is basically a hydro-mechanical column with manual drive and is made from brass, copper, bronze, and glass. They are soldered and threaded together and all these parts are connected by hand.

It can tell time in either the 12 and 24 hour format and has seven different colors as indicators. You can turn off the glow of these indicators if it proves to be too distracting at night. There are three buttons to control the different functions of the clock and you don’t need to be connected to a network to make it function. It is powered by a 5V adaptor and has a 24 x 29 x 11 cm dimension.

Oh and aside from telling time, it can also serve as a phone stand as there’s a cylinder shape on the side of the clock that can hold your smartphone. Of course it destroys the illusion of being a vintage piece if you put a modern device there but if you’re going for a contrast, then that’s the perfect thing to add to this desk clock.

The post Vintage-looking desk clock is handmade with brass and copper materials first appeared on Yanko Design.

Portable tiny home can expand into a 364 square feet living space

Posted on by

One of the most tedious things that I experienced more than once is moving houses. Well for one thing, I have so much stuff so packing them all up and then unpacking them at my new place can be such a pain. So sometimes I wonder if I could just have all of my things and furniture in just one box that I can move from one place to another if I need to not stay in one place. Well, there are now tiny houses that can do just that, provided you can fit everything you own in that space.

Designer: PODX Go

There are a lot of tiny houses already available out there but this one is truly portable and high-tech. The Grande S1 is a pre-fabricated tiny home that can be packed up in a huge box and can be transported to where you need to go. And once you’re ready to settle down in that place, it can unpack itself and expand to a 20-foot-wide living space, complete with furniture and all the stuff that you can fit in that place. Once completely expanded, it has a full width of 20 feet and 364 square feet and it’s “street legal” which is an important requirement for those that need to actually live in that house.

To open up the house, you need to fold out the awning and the stairs and lower the stabilizing posts first. After that, you just press the button and it will unfold in all its mechanical glory. Inside, you have a dining space, living room, kitchen, bathroom, home office, and bedroom. All of the furniture can be folded in and out or stowed away into compartments because, of course, you need to put them somewhere when the house will fold into itself. For example, the queen-sized Murphy bed and the office desk can be stowed into the wall while the dining table can be folded on both sides and the chairs inserted into it.

If you’re getting ready to move again, you just need to stow away the desk, bed, and dining table and then put the sofa in the front entry area while the office chair and coffee table can fit into the bathroom. Then you remove the stabilizing posts and then with another press of a button, the house will then fold itself up and you’ll be ready to move in just 10 minutes. Oh and this tiny house can go off grid as it powered by a1,400-watt array solar panels connected to a 5-kilowatt Lycan power box.

The post Portable tiny home can expand into a 364 square feet living space first appeared on Yanko Design.

Tallest spokeless ferris wheel to be constructed in Seoul

Posted on by

Whenever I visit a new international city for the first time, I try to look if they have a giant ferris wheel and if I can, I take a ride on it to get the best view of the city. So far, the best ones I’ve been on are the Singapore Flyer and the Budapest Eye. Of course I have a lot more to go as I haven’t been to places like the London Eye, High Roller, Dubai Eye, etc. It looks like I’ll be adding something new to my list in one of my favorite cities in the world: a landmark giant ferris wheel is coming to Seoul soon.

Designer: UNStudio

The Seoul Twin Eye will start construction sometime in 2025 and when finished, it will be the world’s tallest spokeless one with its planned 180 meters high structure. Aside from its height, it has a pretty unique design as it will have two intersecting rings that will carry pods going around both tracks. It can hold as many as 1,400 tourists at the same time, with 20-25 people fitting in each of the 64 capsules. This is actually double of what the London Eye is able to accommodate and currently it is one of the largest in the world.

The planned ferris wheel will be located on the edge of the Han River as part pf a 40-meter high cultural complex which Seoul is hoping to develop as part of public spaces for residents and tourists. Not only will you be able to ride such a huge ferris wheel but you’ll also get the best panoramic views of the city. The design is actually inspired by the Honcheonsigye, an astronomical clock that represents celestial objects moving through time.

Aside from the Seoul Twin Eye, there’s a proposal to also construct a monorail to have a direct connection from the subway station to the ferris wheel site. There is also a proposed zip line within the complex for those who prefer a much more adventurous experience, although it’s unclear if it will be connected to the ferris wheel directly. One thing’s for sure, once it is launched, it will add to the beauty and charm of Seoul and will become a must-see destination for locals and tourists alike.

The post Tallest spokeless ferris wheel to be constructed in Seoul first appeared on Yanko Design.

Wall cladding made from corn cob waste brings sustainable construction materials

Posted on by

Construction is something that we probably cannot do without as we continue to build houses, buildings, and other structures. The quest for coming up with sustainable construction is ongoing as we look for materials that are eco-friendly and the process in creating them to be as sustainable as possible. There are a lot of waste in our world that can actually be used for other purposes instead of just becoming biomass as they are mostly used now. A breakthrough in terms of interior wall cladding is now available and it comes from the most unlikeliest of sources: corn cobs.

Designer: StoneCycling and Studio Nina van Bart

CornWall is an alternative to interior wall cladding that uses organic corn cobs, subjecting them to up to 150 degrees Celsius so as to activate and create “strong bonds”. Aside from using sustainable materials, the heating process is also eco-friendly as it uses sustainable energy. The electric heating process uses the solar panels on their factory’s roof. So from the materials to the process itself, we are seeing something that will lessen or leave no carbon footprints at all.

Mostly corn cobs are left on the fields or fermented or burned as biomass. But with this process, they are able to turn them into wall cladding. It is better than the usual ceramic wall cladding that is used or even composite materials like high pressure laminate (HPL). Another advantage to this is that it is able to store more carbon dioxide because of the absorbed CO2 already in it. It is also 100% reusable as it can be removed from interiors through the demountable anchoring system.

Based on the product photos, it doesn’t look much different from the usual wall cladding. It actually looks like those cork coasters that we’re seeing now. It comes in different colors loke DarkBlue, MustardYellow, TerracottaPink, etc. Hopefully we see even more construction materials that use sustainable materials and processes so we can have an industry that is more eco-friendly.

The post Wall cladding made from corn cob waste brings sustainable construction materials first appeared on Yanko Design.

Korg pays tribute to classic vinyl turntable with Handytraxx Play

Posted on by

I’ve never DJ-ed in my life, although I’ve touched a turntable or two in passing. But even though I don’t listen to much of their music, I’ve always found those who use that “instrument” to be fascinating since I have no idea how it really works. One of the more popular tools for DJs who wanted to be portable was the Vestax Handy Trax. Now a brand that has been producing gear for the modern DJ is paying tribute to that particular vinyl player.

Designer: Korg

Korg worked with the former president of Vestax, Toshide Nakama (who passed away before completion of the project) to come up with the Handrytraxx Play, a tribute to the original Vesta Handy Trax. It is able to bring what made the original a favorite among DJs together with Korg’s more modern features in a lightweight product that the musician can easily bring along wherever they need it.

Original Vestax Handytrax

The turntable comes with built-in 3-W speakers and you can choose to spin at either 33.3, 45, or 78 rpm. It is powered by AAA-sized batteries or if you can connect to an outlet, a USB-C cord. It also has a built-in looper that has variable playback speed, a crossfader with reverse mode, delay and scratch effects and several “unique and creative filters”. You can of course monitor playback through headphones and it also has a detachable control panel.

It looks like pretty much a normal vinyl turntable except that it is pretty portable and lightweight. A non-playable prototype of this gadget is expected to make an appearance at the National Association of Music Merchants (NAMM) Show where Korg will be unveiling several other products.

The post Korg pays tribute to classic vinyl turntable with Handytraxx Play first appeared on Yanko Design.

Ikea repurposes old uniforms into new lifestyle collection

Posted on by

Over the past years, we’ve “stanned” brands that not only uses sustainable materials but are also able to upcycle and recycle materials to create new products. We’ve become conscious about how we consume things (well, hopefully, we’ve actually become conscious of it) and how this consumption culture affects this planet we’re living in. Ikea is trying to capture our hearts by creating a new lifestyle line created from materials that they themselves had to discard.

Designer: Ikea

The Swedish brand will be launching their newest collection called VÄXELBRUK which is uniquely made from their recycled coworker uniforms that were discarded when they introduced new attire back in 2020. So instead of just throwing these old uniforms into the trash heaps, they came up with new products that were made from 300 tonnes of these “useless” IKEA uniforms. If you’re not a fan of yellow and blue though, you might want to look elsewhere, even though they managed to tone down the colors considerably without dyeing the textile, which can be more expensive and resource-intensive.

The collection features 16 textile-based items that use the aforementioned old uniforms. This includes things like throw pillows, bags, cushion covers, and even curtains. They are not entirely made from the uniform textile though as they are blended with other recycled materials like polyester from used PET bottles. They also even included some of the “faulty” new uniforms so they will also not go to waste. The inclusion of other materials also helped to alter the colors that are normally so bright.

If you didn’t know that they were made from discarded co-worker uniforms, you’ll just think they’re normal Ikea products that use the iconic colors of the brand. But knowing there they come from makes it even more interesting. The VÄXELBRUK (which means interchangeable use in the Swedish language) collection will be released in February 2024 across Europe stores.

The post Ikea repurposes old uniforms into new lifestyle collection first appeared on Yanko Design.