Harley-Davidson’s $3,299 Turntable Is Shaped Like Their Logo

Posted on by

The moment you see the Pro-Ject x Harley-Davidson Turntable, you know exactly what it is, and you know exactly who it is for. That kind of immediate clarity is rare in product design, and it is worth paying attention to.

Pro-Ject Audio has built a reputation for doing collaborations the right way. The Austrian turntable maker has previously teamed up with The Beatles, Pink Floyd, Metallica, AC/DC, and Elvis Presley, and the pattern across all of them is consistent: these are not logo-on-a-box exercises. Pro-Ject uses each collaboration as an opportunity to rethink the physical design of the hardware itself, from the ground up. The Harley-Davidson edition follows that same standard, and arguably pushes it further than any of its predecessors.

Designer: Pro-Ject

The plinth, which is the chassis of the turntable, is literally shaped like the Harley-Davidson Bar & Shield logo. Not decorated with it. Shaped like it. That distinction matters more than it might initially seem. It means every design decision radiates from an identity that already carries enormous cultural weight, and Pro-Ject had to make the engineering work around that shape without cutting corners. The result is a chassis milled from solid MDF with no hollow spaces, which ensures maximum resonance damping and a dead-quiet noise floor. A precision-milled aluminum top surface sits above it. The whole thing looks like it belongs in a museum of industrial design, or possibly a very well-curated garage.

The materials continue the story. Polished aluminum, stainless steel, and a genuine leather platter mat that echoes the texture and feel of a classic Harley saddle. The 300mm glass platter sits above a diamond-cut aluminum sub-platter, and the total moving drive mass clocks in at 2.75 kilograms. The 915-gram Harley-Davidson record puck alone communicates seriousness. This is not a turntable that was assembled casually.

Then there is the tonearm. A hand-polished 8.6-inch S-shaped aluminum arm with an SME-style removable headshell, high-purity copper internal wiring, and a TPE-damped counterweight. The removable headshell is more useful than it might initially appear, because cartridge swapping becomes considerably easier, and Pro-Ject designed the arm to accommodate a wide range of cartridges for anyone who eventually wants to upgrade beyond the included Pick it PRO moving-magnet cartridge. Out of the box, it is ready to play. Down the road, it is ready to grow.

It is handmade in Europe, available for special order, and priced at $3,299. That is not an entry-level number, and it was never trying to be. Placed next to a $40,000 motorcycle inside a Harley-Davidson showroom, which is apparently one of the places where these will be sold alongside traditional hi-fi dealers, the price reads very differently. Context shifts perception. That is also one of the more quietly brilliant moves of this entire release: distributing it through Harley showrooms introduces serious audio equipment to an audience that may have never walked into a dedicated hi-fi store. That kind of crossover is genuinely good for the culture of listening.

My honest take is that this collaboration works because neither brand had to compromise to get here. Harley-Davidson’s visual identity is so iconic that a lazy licensed product would have been obvious immediately. Pro-Ject’s reputation is built on engineering, not lifestyle branding, so a piece that looked great but performed poorly would have been an embarrassment. The fact that both came away intact says everything about how seriously this was approached.

Production is limited, with no confirmed quantity and no guarantee of a second run. If the convergence of motorcycles, vinyl, leather, aluminum, and genuine hi-fi performance speaks to you at all, waiting feels like an unnecessary gamble. Some objects exist at exactly the intersection of who you are, and this turntable is very specifically that for a certain kind of person: someone who values craft, has opinions about sound, and is not apologetic about having taste with an edge. The open road has always had a soundtrack. Now it finally has a turntable to match.

The post Harley-Davidson’s $3,299 Turntable Is Shaped Like Their Logo first appeared on Yanko Design.

The Kudhva K1 Is the Off-Grid Cabin You Can Actually Take With You

Posted on by

You’ve seen a building so good you immediately wanted to live in it. Ben Huggins built one you can actually move. His latest project, the Kudhva K1, is a portable elevated cabin that somehow manages to feel both seriously considered and completely untethered from the ground beneath it. Huggins is co-founder of Sandford-based New British Design, and the K1 is the kind of thing you design when you love architecture but have no patience for permanence.

The K1 grew directly out of Kudhva, the beloved off-grid retreat carved into a disused slate quarry on the north coast of Cornwall. The original cabins, perched above the landscape on angular stilts, became something of a cult object in British architectural circles. Huggins, working alongside co-designer Hannah Huggins, took that angular, treehouse-like geometry and asked a simple but ambitious question: what if you could move it?

Designer: Ben Huggins of New British Design

The answer is a structure built around a recyclable aluminum frame wrapped in heavy-duty British Millerain Regentex poly-cotton canvas, rated at 407g/m2. Standing 3.6 meters tall, 3.3 meters wide, and 4.9 meters deep, the K1 isn’t small. An elevated deck extends beyond the entrance, accessed by integrated ladders, giving it a genuinely architectural presence that photographs like a building and packs down like equipment. The tripod leg system adjusts independently, meaning it can sit perfectly level on rocky, sloped, or otherwise uncooperative ground without disturbing a single blade of grass below it.

That relationship with the land matters. The K1 requires no foundation, no planning permission, and leaves no trace when it leaves. Two people can have it standing in 30 to 45 minutes. At 320 kilograms, it isn’t light, but it is relocatable, which places it in a category almost entirely its own: too architectural to call a tent, too mobile to call a cabin.

The canvas shell is built to withstand winds up to 80 mph, suggesting a product designed for real weather rather than curated glamping conditions. Inside, the two-person sleeping space carries the same minimal, considered proportions as the original Kudhva structures. The frame is described as infinitely recyclable, which fits neatly within the retreat’s broader ethos of leaving places better than you found them.

Priced at around $15,500, the K1 is now making its way to the United States through British American Camping, with initial deployments planned across glamping destinations in Georgia. The price puts it squarely in the commercial hospitality bracket, though nothing about the design reads like a product built for budget corners. It reads like a building that decided to keep its options open.

The post The Kudhva K1 Is the Off-Grid Cabin You Can Actually Take With You first appeared on Yanko Design.

This 400-Square-Foot Log Cabin Has a Loft, a Covered Porch, and Cathedral Ceilings — and It Arrives on a Flatbed

Posted on by

Zook Cabins has built a quiet reputation for making tiny homes that feel anything but small. The Aspen Park Model is their clearest proof of that. At 400 square feet across a 12-by-41-foot footprint, this log-sided cabin does something few homes of its size manage: it doesn’t ask you to compromise on comfort, character, or quality.

The exterior is built from solid 4-by-8 kiln-dried Eastern White Pine logs, stained and sealed for durability. A 7/12 roof pitch gives the Aspen a proper cabin silhouette, and the 28-gauge, 40-year heritage metal roof comes standard in Textured Evergreen, with Textured Bronze, Textured Black, and Galvalume as alternatives. A 7-by-11-foot covered front porch anchors the entrance, wide enough for a pair of chairs, a small table, and a grill. Mornings genuinely slow down out there.

Designer: Zook Cabins

Inside, 2-by-8 tongue-and-groove Southern Yellow Pine boards line the cathedral ceiling, with log beams left exposed and finished in two coats of polyurethane. Luxury vinyl plank flooring runs throughout. The layout is deliberate: a great room combining the kitchen and living area, one master bedroom, one full bathroom, and a 7.5-foot loft accessible by a proper staircase. Solid pine interior doors with sliding barn door hardware add a detail that feels intentional rather than pulled from a catalog.

The kitchen comes fully outfitted with a 9.8-cubic-foot refrigerator, a two-burner electric induction cooktop, a 24-inch over-the-range microwave, and painted wood cabinets with Formica countertops. The bathroom offers a 4-foot shower with a black shower head, a 30-inch vanity with a matching black faucet, and an exhaust fan. Climate control runs through two 18,000-BTU ductless mini-split units. Ethernet ports are tucked into the closet or cabinet, a small touch that signals Zook understands exactly who is buying these homes.

Structurally, the Aspen rides on a heavy-duty steel, 4-axle chassis with a detachable hitch. It carries an RVIA seal and meets ANSI A119.5 standards, making it eligible for RV loans and RV insurance. For buyers looking to skip traditional mortgage timelines, that matters. Closed-cell spray foam insulates both the roof and floor, and delivery is included nationwide.

For anyone building out a retreat property, running an Airbnb, or just looking for a weekend space that doesn’t feel like a sacrifice, the Aspen makes a quiet but convincing case. The log exterior photographs beautifully, the footprint fits most parcels, and the build quality shows up in the details. It’s a home that asks nothing of you except to enjoy it.

The post This 400-Square-Foot Log Cabin Has a Loft, a Covered Porch, and Cathedral Ceilings — and It Arrives on a Flatbed first appeared on Yanko Design.

Rope Replaced Every Screw and Dowel in This $77 Wooden Folding Stool

Posted on by

Most furniture relies on hardware you can’t see to hold everything together. Screws, bolts, dowels, and adhesives do the invisible work that keeps chairs and stools from coming apart. The Rope Stool does without all of it. Designed as part of a craft exchange between Tottori, Japan, and Gothenburg, Sweden, it holds its flat cedar boards together through rope tension alone, and it folds flat when it’s done.

The exchange that produced it ran for three weeks in Tottori Prefecture, where six Swedish creatives came to collaborate with local Japanese craftspeople. The initiative was organized by Oshinsha, a Japanese retailer dedicated to promoting the work of local artisans, with funding from both countries. It was structured as a genuine creative residency, not a cultural showcase, and the stool that came out of it reflects that difference.

Designers: Esbjorn Grip, Junsei Fujimoto

The brief handed to the pair who made the Rope Stool was deliberately restrictive: create a piece of furniture from a single, repeatable wooden element. What they arrived at is a seat made entirely from identical flat boards of Japanese cedar, no custom-cut components, no specialized hardware. The rope pulls them into formation and holds them there, tight enough to carry a person’s weight, loose enough to release when you want to pack up and leave.

That packing-up quality is one of the things that makes the stool more than a design exercise. A seat that disassembles into a flat bundle of boards and a length of rope is genuinely portable in a way that most stools aren’t. You can bring it to a market stall, a workshop, an outdoor event, or anywhere that needs a seat more than it needs a chair stored permanently in the corner. The rope tension is what creates the rigidity; without it, the parts stay separate and flat.

The cedar itself is a considered choice. Japanese cedar, or sugi, is one of the most widely used traditional wood materials in Japan, valued for its light weight, straight grain, and durability. Flat boards cut from it are uniform enough to be truly interchangeable, which is the point of the single-repeatable-element brief. Each board in the stool is the same as the others, and the rope is what differentiates a pile of boards from something you can sit on.

There’s a conceptual clarity to the construction that most furniture doesn’t achieve. The structure is visible, the logic is readable, and nothing about how it stays together is concealed. Pull the rope, and it assembles. Loosen it, and it comes apart. The simplicity isn’t a limit on what the stool can do: it’s the thing itself, expressed as directly as the brief demanded.

The post Rope Replaced Every Screw and Dowel in This $77 Wooden Folding Stool first appeared on Yanko Design.