Author Archives: Sarang Sheth

World’s fastest FPV drone with a 350km/h Top Speed will radically change how we watch F1 Races

Posted on by

The fact that the world’s fastest FPV drone looks somewhat like a missile is simultaneously incredibly cool and incredibly scary. It might change how we watch F1 races, but it has the potential to change much more than just that.

This just seems like the kind of crazy thing Red Bull would pull off. The company decided to challenge multiple-time F1 champion Max Verstappen to a race – the catch, Verstappen would be behind the wheel of a Red Bull F1 car, while his opponent would be the world’s fastest FPV drone. The project was in collaboration with Dutch Drone Gods, a group of FPV drone makers and pilots known for holding the existing title of the world’s fastest FPV filming drone with a 150km/h top speed. The only problem – Verstappen’s F1 car is more than twice as fast.

Designers: Red Bull Advanced Technologies & Dutch Drone Gods

Drones aren’t new in the F1 circuit, given that the racing organization uses a combination of aerial filming methods to get their shots. Sustained footage is taken on helicopters that hover above the track, but for up-close shots, the F1 team relies on drones… the only problem is that these drones don’t follow the car around. They simply hover in the air, taking cinematic panning/dolly shots before the camera angle changes. Understandably, creating a drone that can follow an F1 car around like a third-person camera in a video game is just a tad bit short of impossible. Drones have a notoriously low flight time, outputting probably a maximum of 15-20 minutes of flight before their batteries get drained. Moreover, F1 cars can hit speeds of almost 400km/h and are designed to be highly responsive, making razor-sharp turns on the tarmac. The Dutch Drone Gods’ FPV maxes out at 150km/h, and can’t perform sharp maneuvers in mid-air. This meant redesigning the drone to hit higher speeds while being responsive, and perhaps most importantly, not melting or exploding in the air because of all the heat generated by hitting upwards of 300km/h speeds.

Pilot and Founder of DDG Ralph Hogenbirk and F1 World Champion Max Verstappen with the Red Bull PFV Drone

The process saw multiple iterations from the Dutch Drone Gods’ team, who took up the challenge of pushing their drone to be as fast as a Formula 1 racecar. The challenge, aside from speed, was also to make the drone maneuverable, and durable. Initial tests yielded a few pitfalls, wires would melt under extreme heat, parts would wear and tear or even explode, but more interestingly, the drone’s stability would take a beating just because of the wind turbulence created by the F1 car as it zoomed across the track. Two rounds of prototypes also showed that simple off-the-shelf components and 3D-printed outer shells couldn’t handle the task, so the DDG team decided to visit the Red Bull Advanced Technologies headquarters to partner with the team there to design the drone. The new drone had machined metal structures, speed-capable inner components, and an FRP composite outer shell that was lightweight but highly resilient.

The final drone prototype got one single chance to race against Verstappen in the latest RB20 car on the Silverstone track. It fared incredibly well against Verstappen, filming the car as it blitzed through the track. The goal wasn’t to go faster than Verstappen’s car, that would be a foolish mistake, but rather, to capture the racecar from a unique following PoV, giving the audience the effect of moving at the same speed as Verstappen. F1 race broadcasts are already pretty exciting to begin with, but imagine being able to follow a car with a camera, capturing the intense speed, adrenaline, and reflexes of the race in real-time…

The engineering of Red Bull’s FPV drone could potentially revolutionize the landscape of F1 filming. Instead of static camera shots or quick drone shots that just pan across a track, Red Bull has potentially unlocked the ability to now follow cars as they race, creating an even more thrilling broadcast that could practically reinvent how people enjoy the sport. Heck, I could totally conceive the creation of a drone racing championship as a result too. The implications for Hollywood are just as exciting too, with cinematic drones getting a whole lot faster thanks to the Red Bull FPV Drone’s unique shape.

However, a drone hitting speeds of 350km/h has its own pitfalls too. Reconnaissance, surveillance, or potentially even weapon-based payload delivery could somehow become even easier and more accessible to anyone with the right tools. Sure, the Red Bull FPV drone isn’t a ballistic missile, but it’s dangerously close to being unstoppable. Try stopping a drone cutting through a military zone or an airport at 350km/h. This new world is exciting, but just as scary too.

That doesn’t take away from how incredibly impressive Red Bull and Dutch Drone Gods’ demonstration was. The Red Bull FPV Drone currently holds the record for defeating its predecessor by a factor of nearly 200km/h. The new FPV drone also gets the bragging rights of being able to keep up with Verstappen, a feat that not even other F1 racers can hold claim to!

The post World’s fastest FPV drone with a 350km/h Top Speed will radically change how we watch F1 Races first appeared on Yanko Design.

This tiny self-watering planter lets you easily grow microgreens with no soil or effort

Posted on by

Small enough to fit in both your palms, the Patella Crescenda makes growing greens ridiculously easy and quick. The unique shape of the planter allows it to water itself so you don’t need to, and helps you grow seeds without any soil, yielding sprouts in just about a week. The Patella Crescenda is intuitive, fun to use, and is made to be reusable so you can have a constant supply of microgreens for your salads, canapes, and smoothies.

Designer: House of Thol

The Patella Crescenda comes together with just four simple parts – a base tray, two reusable steel seed plates, and a water bulb that fits on top. Fill the bulb with water and place it upturned into the base and an air vacuum inside helps deploy the water slowly, filling up the base tray. Two steel plates sit on top of the base tray, right above the water level. Cuts on these plates let you place clusters of seeds like pulses, legumes, grains, etc. and they begin growing on their own, with the roots descending downwards into the base trey through the cuts.

In just about a week, the microgreens are ready to harvest and can simply be cut with scissors, or pinched off the steel plates. The sprouts grow directly in water without any soil, so you don’t need to clean or rinse them. Garnish them over your food or chuck them in your smoothies. Microgreens are incredibly nutrient-dense compared to their seed/grain/legume counterparts, giving your dishes a fresh burst of color as well a lot of minerals and antioxidants.

The Patella Crescenda simplifies the art of growing microgreens by literally condensing it down into three steps – Add water, add seeds, and harvest. The compact design, coupled with that glass bulb of water gives your interior space a wonderful aesthetic touch, while allowing you to intuitively see how much water your planter has. The steel plates come with six grill-cuts, allowing you to grow a variety of microgreens at the same time in the same dish, and once you’ve reaped your sprouts, cleaning and resprouting a new batch of seeds gives you a fresh harvest in just about a week!

The post This tiny self-watering planter lets you easily grow microgreens with no soil or effort first appeared on Yanko Design.

Girard-Perregaux’s Luxury Timepiece Features 4.5 Billion-Year-Old Meteorite on its Dial

Posted on by

There’s a certain poetic beauty in seeing how well a 4.5 billion-year-old cosmic rock blends so seamlessly with some of the most brilliantly modern timekeeping technology in the world. A gadget that measures time, adorned with one of the oldest remnants of space-time ever.

Imagine strapping a piece of outer space to your wrist, where timekeeping transcends mere functionality and becomes a cosmic journey. Girard-Perregaux, the venerable Swiss watchmaker with over two centuries of horological heritage, has just unveiled its latest masterpiece, the Free Bridge Meteorite: a watch graced with a dial forged from an actual 4.5 billion-year-old meteorite. This wrist-bound marvel connects us to the silent ballet of our solar system’s past, offering not only an instrument for measuring time but also a tangible link to the unfathomable vastness of space itself.

Designer: Girard-Perregaux

The watch is housed in a 44mm diameter stainless steel case, striking a balance between robustness and elegance with its 12.2mm thickness. It features a highly domed box-style sapphire crystal that not only safeguards the dial but also enhances the watch’s visual appeal, offering a distinct view from different perspectives. The case showcases a harmony of brushed and polished finishes, reminiscent of the interplay of light in the cosmos.

Central to the allure of the Free Bridge Meteorite is its dial, where Girard-Perregaux’s craftsmanship shines brightest. The black flange and luminescent metallic hour indices offer a contemporary flair, improving readability while maintaining sophistication. The design forgoes a 6 o’clock mark to accommodate the variable inertia balance, with the GP logo at the 12 position serving as a subtle homage to the brand’s history and design ethos.

The crown jewel of the Free Bridge Meteorite, as its name suggests, is the inclusion of meteorite plates flanking each side of the barrel, secured by two screws. These plates, crafted from the Gibeon meteorite found in Namibia, bear unique Widmanstätten patterns, serving as a tangible connection to the cosmos. Composed primarily of an iron-nickel alloy and estimated to be approximately 4.5 billion years old, these meteorite inlays beautifully represent the enduring passage of time and the wonders of the universe.

Technologically, the Free Bridge Meteorite is no less impressive. The movement, visible through the sapphire crystal case-back, is the Girard-Perregaux in-house automatic caliber GP01800. It operates at 28,800 vibrations per hour and offers a 54-hour power reserve, embodying the brand’s dedication to precision and endurance. The use of silicon in the escapement and balance wheel components not only boosts the watch’s functionality but also its longevity, thanks to silicon’s anti-magnetic qualities and resistance to deterioration.

A black calfskin strap with a fabric-like texture and white stitching near the lugs, secured with a steel triple-folding clasp, completes the ensemble. This strap choice lends a modern vibe to the watch, ensuring it fits a wide range of settings, from formal gatherings to everyday wear. The watch boasts a price tag of 27,100 EUR (~$29415 USD), which may sound a little outrageous but hey, that’s the price of wearing a fragment of space and centuries-old Swiss timekeeping technology on your wrist. Girard-Perregaux does sweeten the deal with a 5-year extended warranty, though…

The post Girard-Perregaux’s Luxury Timepiece Features 4.5 Billion-Year-Old Meteorite on its Dial first appeared on Yanko Design.

Modified $849 GoPro HERO12 lets you mount Professional DSLR Lenses on your Action Camera

Posted on by

Not many people really appreciate the GoPro for exactly how advanced it is. For a device that small, it boasts a mighty sensor and can capture media in incredibly high resolutions like 5.3K (with image stabilization no less)… but that tiny form factor has one trade-off, the fact that it doesn’t support interchangeable lenses – and, to be honest, that seems like the one thing that makes photographers and videographers not take the GoPro seriously, even though it outputs videos comparable to larger cameras like the ones from RED and Hasselblad.

So what if you could just switch out the GoPro’s fisheye lens for something much more advanced, like some serious DSLR or film camera lenses? Well, the folks at Canada-based Back-Bone managed to hack together a GoPro Hero12 to make it universally compatible with a whole range of DSLR lenses. The Back-Bone H12PRO comes with quite a few interesting tricks up its sleeve. The front features a special mounting armature to load professional camera lenses, giving your GoPro Hero12 the ability to shoot in ultrawide but also telescopic, or even macro, depending on the lenses you’ve got on hand.

Designer: Back-Bone

For the folks at Back-Bone, creating this modified GoPro was about allowing the action camera to achieve its full potential. The GoPro Hero12 is a multimedia beast, capable of shooting 5.3K HDR videos and even stills with its 27MP shooter. For a camera this capable, restricting it to a simple fisheye lens is quite a disservice if you ask me, which is why the modified H12PRO is so compelling.

The H12PRO lets you attach a variety of mounting brackets, giving you the choice between M12, CS, and C-mount lenses. It’s pretty much the same size as the existing GoPro, which means it also supports the company’s Media Mod, allowing you to add extra accessories like directional mics, flashes, etc. The H12PRO also packs GoPro’s Enduro Battery, offering longer battery life, especially in cold conditions.

With the Media Mod and the ability to pretty much attach any kind of lens to your GoPro, the H12PRO gives you the most powerful camera setup that can fit in your pocket. It’s cheaper and smaller than a flagship phone, and shoots higher quality content than cameras twice or thrice its size. The H12PRO has a tripod mount on the bottom, allowing you to attach it to tripods, gimbals, or even small-ish drones with decent payload abilities. Heck, the folks at Back-Bone are also selling an optional Micro Four-Thirds mounting plate to let you attach MFT lenses to your GoPro. If that isn’t the wildest, most brilliant upgrade to the world’s most advanced action camera, I don’t know what is. After all, an action camera is just a camera designed to capture high quality content at a great frame rate, right? So why not exploit its abilities to the max?!

Back-Bone’s H12PRO is available on its website. The $849 kit includes the following:

  • H12PRO modified HERO12 Black camera
  • Aluminum Tripod Mount
  • Original folding GoPro mount
  • Enduro Battery
  • 5mm C-Mount ring
  • M12 to CS adapter
  • M12 locking ring
  • Plastic cap (C-Mount)
  • USB-C Cable
  • Curved adhesive mount
  • Mounting buckle
  • Spare protective glass filter

Understandably, a modified HERO12 won’t be covered under GoPro’s warranty program, but Back-Bone does offer a 6-month repair guarantee against faulty parts or defects, and a zero-labor-cost repair warranty for a year (you just pay for parts and shipping).

The post Modified $849 GoPro HERO12 lets you mount Professional DSLR Lenses on your Action Camera first appeared on Yanko Design.

This WALL-E-inspired tabletop robot has artificial intelligence and a friendly personality

Posted on by

If we’re going to give in to our eventual robot overlords, my only hope is that they’re as adorable-looking as Doly.

With its googly eyes and treadmill-operated motion system, Doly instantly reminds me of Pixar’s WALL-E. Designed as a robot companion with high emotional intelligence, and the ability to respond to requests, evoke joy, and even serve as a learning tool, Doly combines an open-source build with AI capabilities. The result is remarkably better than the tabletop toys you’re used to expecting. Doly is smart, sensitive, and self-sufficient, as it moves around from A to B, enriches you with interactions and those adorable eyes, and then makes its way back to its charging station when it’s low on batteries.

Designer: Levent Erenler – Limitbit Inc.

Click Here to Buy Now: $299 $449 ($150 off). Hurry, only 4/325 left! Raised over $190,000.

On the design front, the Doly adopts a familiar form factor, mimicking the success of WALL-E and even the Vector robot by Anki. It stands at just 68mm (2.67 inches) tall, but has a personality that’s larger than life. Nearly half that height can be attributed to Doly’s massive eyes that give it its distinct cartoonish character that instantly makes you fall in love with the robot. The eyes can look in different directions, respond to stimuli, express emotions, and can even be replaced by imagery like weather status, a clock, or a timer. Depending on Doly’s mood, or how it reacts to your commands, the eyes do most of the speaking… while voice models allow Doly to speak in any tone of your choice too.

Doly accepts touch and voice inputs, through strategically located microphones and capacitive touch surfaces located on its body. You can tap its head, pet it, tickle it, and Doly emotes exactly how you’d expect a pet to. Talk to it too, and its built-in AI responds intelligently to your queries and commands, letting you set timers, know the weather, take a photo, etc. The robot has natural language understanding, and packs an 8MP camera that lets it see the world around it, identify humans, and even recognize familiar faces. Treads on both sides allow Doly to move around too, shifting forward, backward, and even making turns, while ToF sensors on the front allow it to sense depth, and four strategically placed edge-detection sensors prevent your robot from accidentally driving off surfaces like the stairs or a tabletop (Amazon’s Astro could pick up a few lessons from Doly)

On the inside, Doly runs on a Raspberry Pi board that drives its systems and even powers the AI functions. The robot is built on open-source approach with open-hardware and open-design, allowing you to mod or customize your robot in a variety of ways through I/O ports or even by adding quirky attachments to the robot’s magnetic hands. The hands themselves are an interactive dream to begin with, allowing you fistbump your Doly , or even have it grab things, with lights inside the arms adding a rich layer of interact-ability. I/O ports on the top let you build attachments for your Doly, transforming it in a variety of ways and helping you learn robotics too.

8 MP camera allows Doly to memorize and recognize people with their names, take high quality snapshots and many more.

Doly communicates and responds you back with his own voice when you ask about the weather forecast, time, your name and many more.

To that end, Doly’s much more advanced than most other STEM toys out there. It grows with you, learning and evolving to understand you, your mannerisms, needs, etc. so that no two Doly robots are alike after multiple months/years of usage. Moreover, the robot itself encourages people of all ages to learn coding, with support for languages like C, C++, and Python that let you program your robot, and even much more intuitive block-based coding apps like Google’s own Blockly that help children grasp the basics of programming through the robot toy.

Doly relies on cameras to analyze its surroundings and recognize faces, and built-in microphones to pick up on voice commands – that’s a fair amount of data that your toy robot gathers on a daily basis (sort of like your smart camera and smart speaker combined). Coupled with the fact that Doly has a built-in AI that learns from you (which means it does gather data for machine learning purposes), data privacy can be a pretty large concern. To ensure that your data stays safe and away from hackers, governments, and data-brokers who sell data to third parties, Doly stores and processes all its information locally, oftentimes even working offline. Embedded processing power and local storage ensure that your data never reaches any remote server where it can be compromised by targeted hacks.

Other than that, each Doly comes with an app that lets you access specific features like managing settings or performing graphical programming (Doly’s creators emphasize that you don’t NEED an app to use your robot). The creators do, however, mention that the robot can be customized to wild degrees, with even the ability to swap out the Raspberry Pi module on the inside with better CM4 boards that have better RAM and storage. The Doly robot starts at $269 for a DIY kit that lets you build your own robot from scratch, or $299 for a fully assembled bionic buddy. Limitbit, the creators behind Doly, promise free lifetime over-the-air (OTA) software updates to ensure the robot is always up to date with the latest features, and are apparently even working on ChatGPT integration to make your tiny robotic friend even smarter! Just promise that you won’t turn it against humanity!

Click Here to Buy Now: $299 $449 ($150 off). Hurry, only 4/325 left! Raised over $190,000.

The post This WALL-E-inspired tabletop robot has artificial intelligence and a friendly personality first appeared on Yanko Design.

This WALL-E-inspired tabletop robot has artificial intelligence and a friendly personality

Posted on by

If we’re going to give in to our eventual robot overlords, my only hope is that they’re as adorable-looking as Doly.

With its googly eyes and treadmill-operated motion system, Doly instantly reminds me of Pixar’s WALL-E. Designed as a robot companion with high emotional intelligence, and the ability to respond to requests, evoke joy, and even serve as a learning tool, Doly combines an open-source build with AI capabilities. The result is remarkably better than the tabletop toys you’re used to expecting. Doly is smart, sensitive, and self-sufficient, as it moves around from A to B, enriches you with interactions and those adorable eyes, and then makes its way back to its charging station when it’s low on batteries.

Designer: Levent Erenler – Limitbit Inc.

Click Here to Buy Now: $299 $449 ($150 off). Hurry, only 4/325 left! Raised over $190,000.

On the design front, the Doly adopts a familiar form factor, mimicking the success of WALL-E and even the Vector robot by Anki. It stands at just 68mm (2.67 inches) tall, but has a personality that’s larger than life. Nearly half that height can be attributed to Doly’s massive eyes that give it its distinct cartoonish character that instantly makes you fall in love with the robot. The eyes can look in different directions, respond to stimuli, express emotions, and can even be replaced by imagery like weather status, a clock, or a timer. Depending on Doly’s mood, or how it reacts to your commands, the eyes do most of the speaking… while voice models allow Doly to speak in any tone of your choice too.

Doly accepts touch and voice inputs, through strategically located microphones and capacitive touch surfaces located on its body. You can tap its head, pet it, tickle it, and Doly emotes exactly how you’d expect a pet to. Talk to it too, and its built-in AI responds intelligently to your queries and commands, letting you set timers, know the weather, take a photo, etc. The robot has natural language understanding, and packs an 8MP camera that lets it see the world around it, identify humans, and even recognize familiar faces. Treads on both sides allow Doly to move around too, shifting forward, backward, and even making turns, while ToF sensors on the front allow it to sense depth, and four strategically placed edge-detection sensors prevent your robot from accidentally driving off surfaces like the stairs or a tabletop (Amazon’s Astro could pick up a few lessons from Doly)

On the inside, Doly runs on a Raspberry Pi board that drives its systems and even powers the AI functions. The robot is built on open-source approach with open-hardware and open-design, allowing you to mod or customize your robot in a variety of ways through I/O ports or even by adding quirky attachments to the robot’s magnetic hands. The hands themselves are an interactive dream to begin with, allowing you fistbump your Doly , or even have it grab things, with lights inside the arms adding a rich layer of interact-ability. I/O ports on the top let you build attachments for your Doly, transforming it in a variety of ways and helping you learn robotics too.

8 MP camera allows Doly to memorize and recognize people with their names, take high quality snapshots and many more.

Doly communicates and responds you back with his own voice when you ask about the weather forecast, time, your name and many more.

To that end, Doly’s much more advanced than most other STEM toys out there. It grows with you, learning and evolving to understand you, your mannerisms, needs, etc. so that no two Doly robots are alike after multiple months/years of usage. Moreover, the robot itself encourages people of all ages to learn coding, with support for languages like C, C++, and Python that let you program your robot, and even much more intuitive block-based coding apps like Google’s own Blockly that help children grasp the basics of programming through the robot toy.

Doly relies on cameras to analyze its surroundings and recognize faces, and built-in microphones to pick up on voice commands – that’s a fair amount of data that your toy robot gathers on a daily basis (sort of like your smart camera and smart speaker combined). Coupled with the fact that Doly has a built-in AI that learns from you (which means it does gather data for machine learning purposes), data privacy can be a pretty large concern. To ensure that your data stays safe and away from hackers, governments, and data-brokers who sell data to third parties, Doly stores and processes all its information locally, oftentimes even working offline. Embedded processing power and local storage ensure that your data never reaches any remote server where it can be compromised by targeted hacks.

Other than that, each Doly comes with an app that lets you access specific features like managing settings or performing graphical programming (Doly’s creators emphasize that you don’t NEED an app to use your robot). The creators do, however, mention that the robot can be customized to wild degrees, with even the ability to swap out the Raspberry Pi module on the inside with better CM4 boards that have better RAM and storage. The Doly robot starts at $269 for a DIY kit that lets you build your own robot from scratch, or $299 for a fully assembled bionic buddy. Limitbit, the creators behind Doly, promise free lifetime over-the-air (OTA) software updates to ensure the robot is always up to date with the latest features, and are apparently even working on ChatGPT integration to make your tiny robotic friend even smarter! Just promise that you won’t turn it against humanity!

Click Here to Buy Now: $299 $449 ($150 off). Hurry, only 4/325 left! Raised over $190,000.

The post This WALL-E-inspired tabletop robot has artificial intelligence and a friendly personality first appeared on Yanko Design.

Tiny USB Device Saves You Nearly $1000 Per Year on Cloud Storage by Auto Backing Up Your Photos

Posted on by

How much do you pay for your iCloud+ or Google Drive storage to make sure your photos get backed up on the cloud? Imagine paying zero.

Remember a time when flagship phones came with memory card slots that let you expand storage and potentially even swap out old cards for new ones to get more storage? Sure, some phones still go as far as offering expandable storage, but for the most part, all companies have defaulted to the ‘cloud storage’ model where you pay a monthly subscription and your phone automatically backs data up without you needing to remember. It’s convenient, but it’s also costly, as you’re suddenly required to pay monthly cloud storage fees. It isn’t easy to ask phone makers to revert back to those good old MicroSD card days… but that’s where something as deviously simple as the PhotoCube PD+ comes in. Designed as a simple plug-and-play USB-C device, the PhotoCube automatically backs up your photos to an SD card for you, saving effort and money. A companion app makes the entire process as simple as clicking a button (instead of manually selecting all your images and copy-pasting them) and the PhotoCube does the rest, updating your old storage files with new ones so your photo backups are always up to date. It’ll also create separate file structures for multiple devices, letting you separately back up photos across different phones and even tablets. Your photos remain offline, so you don’t need the internet to access them – and as a result, they’re also hacker-resistant. Quite impressive for a device that just costs $55.

Designer: PhotoFast

Click Here to Buy Now: $55 $99 (45% off) Hurry! Only 4 left of 470.

The reason most people prefer cloud storage is because it’s designed to be the easiest option ever. The phone backs itself up without you needing to remember, the files get stored in a safe server somewhere else, and if you ever lose your device, you can easily restore your photos if you log into your cloud storage account. What users then ignore is the fact that they end up paying hundreds (if not thousands) of dollars each year to store their photos. The PhotoCube PD+ aims at breaking that dependency with a hardware solution that’s just as easy. Plug the PhotoCube in and it literally begins backing up your photos in an instant. Photos get stored on a MicroSD card, so you can choose how much storage you want (you get 2 terabyte MicroSD cards nowadays), and it all happens offline without eating data transfer fees.

The PhotoCube device can easily be configured using an app

The fact that your data gets stored on a MicroSD card allows the PhotoCube to be such a ridiculously compact device. It’s no bigger than an AirTag, albeit square in shape (hence its name). A card slot on one end lets you add a MicroSD card in, while a male USB-C pin on the other end lets you plug your PhotoCube into any Android phone/tablet, any iPad with USB-C, and the latest iPhone 15 series. There’s also a female USB-C port on the opposite end (right under the card slot) that allows you to charge your phone THROUGH the PhotoCube, so you can run long backups while juicing your battery – a feature so wildly convenient it deserves a special mention.

Measuring just 30mm wide and 38mm long, the PhotoCube is smaller than even an AirPods case, but it can store up to 2TB

The PhotoCube’s brilliance lies in the fact that it isn’t a one-trick pony. When it isn’t backing up photos from your phone, it works as a card reader with all your devices (especially with your laptop), allowing you to read photos from your phone, drone, or DSLR on any machine. With USB 3.2 Gen 1, the PhotoCube PD+ can transfer files as rapidly as 5Gb/s, letting you swiftly back up or even access media without waiting for stuff to load.

Speaking of swift, the tiny gadget does a remarkable job of power delivery too, allowing you to charge your phone at an impressive 60W for fast-charging. The PowerCube PD+ supports pass-through fast-charging which means your backups and your charging can happen simultaneously… and rapidly.

Photo transfers happen in tandem with the PhotoFast app, which has a few impressive features. You can do more than just backing up photos and videos – the app lets you back up contacts, calendars, documents, even music (if you still believe in listening to MP3 files)… and if you’ve already paid for cloud storage, the PhotoFast app lets you download your backups from the cloud server onto the PhotoCube so you can cancel that pesky subscription and keep your files safe locally, and access them without needing to connect to the internet. The app intelligently also allows the PhotoCube to create and maintain separate backups for separate devices, so one PhotoCube could potentially store your entire family’s data, getting you off that expensive family cloud storage plan.

This isn’t maker PhotoFast’s first rodeo. Last year’s PhotoCube PD had a similar design, but didn’t support OTG plug-and-play storage (it needed a separate power source), and it wasn’t configured to work with iPhones (because iPhones didn’t have USB-C ports until September last year). The new PD+ comes with all those improvements under the hood, and now with two color options too – a simple white and grey, and a slightly jazzed up white and sky blue. The PhotoCube PD+ starts at $55 for Kickstarter backers (the original price after the crowdfunding campaign goes up to $99) and ships starting June 2024. It doesn’t come with a MicroSD card, so you have the liberty of choosing what brand/capacity of storage card you want to pair with your gadget. That’s quite a lot of flexibility for a device that fits in your pocket and also saves you money every month!

Click Here to Buy Now: $55 $99 (45% off) Hurry! Only 4 left of 470.

Click Here to Buy Now: $55 $99 (45% off) Hurry! Only 4 left of 470.

The post Tiny USB Device Saves You Nearly $1000 Per Year on Cloud Storage by Auto Backing Up Your Photos first appeared on Yanko Design.

The M-Hero 917 is a Military-Inspired SUV with a 1000hp Engine, Steer-By-Wire, and a Companion Drone

Posted on by

For an extra $14,000, the manufacturer will also sell you a companion drone to go with your mammoth SUV.

Meet the Meishi 917, also fondly dubbed the M-Hero 917 from Dongfeng – China’s first off-road automotive brand. Drawing inspiration from the robustness of military vehicles, the M-Hero 917 boasts a design characterized by sharp lines and a commanding presence. Its black matte finish and robust bumper lend it an unmistakably aggressive demeanor, reminiscent of a machine ready to conquer any terrain it encounters. However, despite its formidable appearance, it’s essential to recognize that beneath its rugged exterior lies a meticulously engineered chassis and a formidable powertrain.

Designer: Dongfeng Motor Corporation

The M-Hero 917 offers a choice between two powertrain options tailored to meet the diverse needs of modern drivers. For those inclined towards embracing sustainable mobility, there’s a fully electric variant equipped with four electric motors and a substantial 140-kilowatt-hour NMC battery. Alternatively, there’s a range-extender hybrid model featuring a 1.5-liter turbocharged four-cylinder engine serving as a generator, coupled with a 66-kWh battery pack and three electric motors, delivering an impressive output of 816 horsepower. Such capabilities translate into a blistering 0-62 miles per hour acceleration in a mere six seconds, reaffirming the SUV’s prowess on and off the beaten path.

However, what truly sets the M-Hero 917 apart are its standard and optional features, which elevate the driving experience to unprecedented heights. Inside the cabin, attention to detail reigns supreme, with interior door handles reminiscent of the iconic Desert Eagle pistol, and aircraft throttle-inspired levers adorning the center console, granting intuitive control over the vehicle’s transmission and driving modes. Complementing these design elements are three strategically positioned screens, comprising a digital instrument cluster, a navigation display, and a passenger infotainment screen, ensuring occupants are seamlessly connected and informed throughout their journey.

Yet, perhaps the pièce de résistance lies in the SUV’s optional drone package, a testament to the convergence of automotive and aerial technologies. Priced at $14,000, this package includes a state-of-the-art drone that can be effortlessly controlled via voice commands from within the vehicle, offering a unique perspective and enhancing the overall driving experience. Furthermore, the inclusion of a switchable rear steering system grants the M-Hero 917 the ability to execute the elusive crab walk maneuver, further showcasing its versatility and agility in navigating challenging terrains.

The post The M-Hero 917 is a Military-Inspired SUV with a 1000hp Engine, Steer-By-Wire, and a Companion Drone first appeared on Yanko Design.

This LEGO Vintage Radio lets you actually play music through your smartphone…

Posted on by

With 25 submissions to the LEGO Ideas forum (5 of which crossed the 10,000 vote mark), LEGO builder Dimexart is somewhat of a veteran when it comes to putting plastic bricks together. The brick aficionado’s latest creation combines LEGOs with the real-world in the form of a vintage radio that actually plays music. Made from over a thousand LEGO bricks, this vintage radio has a secret flap on the back that lets you slide your smartphone in. Switch on Spotify or YouTube, select your favorite track, and hit play as you pop your phone into the LEGO Vintage Radio and it recreates the feeling of having an antique radio playing your favorite tracks! The best part, Dimexart’s build comes with functional knobs and buttons that you can twist and press, moving sliders inside the gizmo just like you would with an authentic AM/FM radio.

Designer: Dimexart

Strangely enough, Dimexart made a radio back in 2021 out of LEGO bricks, and it did cross the 10,000 vote mark too, but was rejected by LEGO’s internal team. Unfazed by this, Dimexart went back to the drawing board and decided to tweak the radio to make it even better. The new MOC (My Own Creation, as it’s called in LEGO parlance) now features a flap on the back that let’s you slide any smartphone in, using the phone’s speakers and the acoustic chamber of the empty LEGO radio to create that warm, slightly twangy audio associated with radios of the past.

In Dimexart’s demo, he even uses the phone screen to mimic the warm backlight seen in most radio control panels. Given that they were sometimes used at night too, radios came with lights in their gauges so you could see which station you were on. Dimexart’s build uses light from your smartphone’s screen to create a similar experience.

The dials on the left and right are both functional and cause sliders inside to move left or right to indicate the station/frequency or the volume. There are dials/knobs and buttons on the bottom too, which are functional in that they can be interacted with – but that’s about all they do. It’s a fun interaction, however, and recreates the real tactile joy of the radio, which firmly belonged in a much more hands-on era long before touchscreens dominated our lives. The radio comes with a wood-inspired aesthetic, a rather realistic set of grills, and that gorgeous control panel on the bottom that I’m sure you won’t be able to get enough of.

Dimexart’s entry currently has 3,228 supporters as of writing this article. If you want to vote for the entry (and hopefully see it turn into a retail box set), vote for it on the LEGO Ideas website here.

The post This LEGO Vintage Radio lets you actually play music through your smartphone… first appeared on Yanko Design.

Handheld e-ink reader helps you pick up and practice new languages

Posted on by

Dubbed the Paperang Q1, this portable ‘vocabulary card’ works better than Duolingo, allowing you to take quizzes, access flash cards, and quickly pick up new phrases. It’s smaller than a Kindle, and does a much better job of teaching you a new language than those translator apps that only focus on short-term gains. And unlike other e-ink readers, this comes with a speaker too, enabling audio-based learning.

Designer: Zuoyebang Education Technology (Beijing) Limited

The Paperang Q1 comes with a 3.9-inch e-ink display with touch input, along with a home button on the side and a record button on the top. Its staggered design gives it a distinct aesthetic that makes it instantly recognizable, with its quadrilateral forms intersecting each other to give you an overall rectangle that still feels different. Except, what you’d expect to be a camera bump is, in fact, the speaker unit that pumps out rich audio. The bump also gives your fingers a place to rest as you’re holding the device.

The Paperang Q1’s simplistic design opens it up to a lot of visual exploration. The two forms can be paired in distinct colors, creating a fun and funky palette.  The device itself comes in black and white variants, although it does feature replaceable metal backplates that add a touch of color to the overall gadget, allowing users to choose between classic or vibrant color schemes.

The post Handheld e-ink reader helps you pick up and practice new languages first appeared on Yanko Design.