This WALL-E-inspired tabletop robot has artificial intelligence and a friendly personality

If we’re going to give in to our eventual robot overlords, my only hope is that they’re as adorable-looking as Doly.

With its googly eyes and treadmill-operated motion system, Doly instantly reminds me of Pixar’s WALL-E. Designed as a robot companion with high emotional intelligence, and the ability to respond to requests, evoke joy, and even serve as a learning tool, Doly combines an open-source build with AI capabilities. The result is remarkably better than the tabletop toys you’re used to expecting. Doly is smart, sensitive, and self-sufficient, as it moves around from A to B, enriches you with interactions and those adorable eyes, and then makes its way back to its charging station when it’s low on batteries.

Designer: Levent Erenler – Limitbit Inc.

Click Here to Buy Now: $299 $449 ($150 off). Hurry, only 4/325 left! Raised over $190,000.

On the design front, the Doly adopts a familiar form factor, mimicking the success of WALL-E and even the Vector robot by Anki. It stands at just 68mm (2.67 inches) tall, but has a personality that’s larger than life. Nearly half that height can be attributed to Doly’s massive eyes that give it its distinct cartoonish character that instantly makes you fall in love with the robot. The eyes can look in different directions, respond to stimuli, express emotions, and can even be replaced by imagery like weather status, a clock, or a timer. Depending on Doly’s mood, or how it reacts to your commands, the eyes do most of the speaking… while voice models allow Doly to speak in any tone of your choice too.

Doly accepts touch and voice inputs, through strategically located microphones and capacitive touch surfaces located on its body. You can tap its head, pet it, tickle it, and Doly emotes exactly how you’d expect a pet to. Talk to it too, and its built-in AI responds intelligently to your queries and commands, letting you set timers, know the weather, take a photo, etc. The robot has natural language understanding, and packs an 8MP camera that lets it see the world around it, identify humans, and even recognize familiar faces. Treads on both sides allow Doly to move around too, shifting forward, backward, and even making turns, while ToF sensors on the front allow it to sense depth, and four strategically placed edge-detection sensors prevent your robot from accidentally driving off surfaces like the stairs or a tabletop (Amazon’s Astro could pick up a few lessons from Doly)

On the inside, Doly runs on a Raspberry Pi board that drives its systems and even powers the AI functions. The robot is built on open-source approach with open-hardware and open-design, allowing you to mod or customize your robot in a variety of ways through I/O ports or even by adding quirky attachments to the robot’s magnetic hands. The hands themselves are an interactive dream to begin with, allowing you fistbump your Doly , or even have it grab things, with lights inside the arms adding a rich layer of interact-ability. I/O ports on the top let you build attachments for your Doly, transforming it in a variety of ways and helping you learn robotics too.

8 MP camera allows Doly to memorize and recognize people with their names, take high quality snapshots and many more.

Doly communicates and responds you back with his own voice when you ask about the weather forecast, time, your name and many more.

To that end, Doly’s much more advanced than most other STEM toys out there. It grows with you, learning and evolving to understand you, your mannerisms, needs, etc. so that no two Doly robots are alike after multiple months/years of usage. Moreover, the robot itself encourages people of all ages to learn coding, with support for languages like C, C++, and Python that let you program your robot, and even much more intuitive block-based coding apps like Google’s own Blockly that help children grasp the basics of programming through the robot toy.

Doly relies on cameras to analyze its surroundings and recognize faces, and built-in microphones to pick up on voice commands – that’s a fair amount of data that your toy robot gathers on a daily basis (sort of like your smart camera and smart speaker combined). Coupled with the fact that Doly has a built-in AI that learns from you (which means it does gather data for machine learning purposes), data privacy can be a pretty large concern. To ensure that your data stays safe and away from hackers, governments, and data-brokers who sell data to third parties, Doly stores and processes all its information locally, oftentimes even working offline. Embedded processing power and local storage ensure that your data never reaches any remote server where it can be compromised by targeted hacks.

Other than that, each Doly comes with an app that lets you access specific features like managing settings or performing graphical programming (Doly’s creators emphasize that you don’t NEED an app to use your robot). The creators do, however, mention that the robot can be customized to wild degrees, with even the ability to swap out the Raspberry Pi module on the inside with better CM4 boards that have better RAM and storage. The Doly robot starts at $269 for a DIY kit that lets you build your own robot from scratch, or $299 for a fully assembled bionic buddy. Limitbit, the creators behind Doly, promise free lifetime over-the-air (OTA) software updates to ensure the robot is always up to date with the latest features, and are apparently even working on ChatGPT integration to make your tiny robotic friend even smarter! Just promise that you won’t turn it against humanity!

Click Here to Buy Now: $299 $449 ($150 off). Hurry, only 4/325 left! Raised over $190,000.

The post This WALL-E-inspired tabletop robot has artificial intelligence and a friendly personality first appeared on Yanko Design.

This compact ATV hauling trailer is ultimate companion for your ice fishing escapades

There are different kinds of people with varied adventure/recreation demands. Trailer builders have been trying to cater to all the distinct needs through teardrops – compact trailers – for Overlanding expeditions, beaches, and campsites. Now leaping onto ice, Minnesota-based Eveland’s Inc has built the IcePro, a compact, lightweight toy hauling mobile house that you can take ice fishing.

Designed for ice anglers with the will to own a toy hauling fish house, the IcePro features a boxy profile that is based on an aluminum frame. A neon blue line divides the top white and bottom black color fiberglass exterior that renders the tiny trailer lightweight to tow behind an ATV. And to our surprise, the ATV is parked within the IcePro itself, when you’re not occupying it over a frozen lake.

Designer: IcePro Trailers

Inside the winterized fiberglass exterior, the IcePro has a well-insulated molded plastic interior that is comfortable and remains warm throughout your adventure on ice. This convenience is provided in 17 feet by 6.5 feet boxy structure, which is 6.8 feet high and apt to haul up to 1,200 lbs payload.

Envisioned to keep you comfy in harsh weather, the IcePro is priced at $24,995. With a dedicated garage – behind its double rear doors – for storing your ATV, the trailer can be easily towed by the ATV when you are ready to venture out. Once you reach the frozen ice, you can use the winch tire system to lower the IcePro down to the ice level so the occupant(s) can drill a hole in the ice from one of the (several) Catch Cover fishing holes and lower the fishing rods to begin with the business.

Since the IcePro isn’t meant to be a house on wheels; it has a minimalistic layout with overhead storage, large cabinets, and four Bluetooth speakers. It can be customized with an optional pair of swivel captain’s chairs, a generator, a fish finder system from Garmin, certain portable kitchen appliances, and an inflatable mattress. If you want to be on the ice, angling your heart’s content, the IcePro is a toy hauler you need. And I wish the ATV came complimentary with it!

The post This compact ATV hauling trailer is ultimate companion for your ice fishing escapades first appeared on Yanko Design.

DeLonghi portable heater is eco-friendly for your micro-climate needs

While it’s of course always a comfort to be working in a place with air conditioning, there are still times when it might be too cold for you. Or you may sometimes be working outdoors when the weather is a bit too cool / cold for comfort. Not all places have a heater for your convenience so a portable heater may just be the solution. But again, not all portable heaters are actually portable or convenient. This new one from DeLonghi may be the ideal one, and it’s also mindful of the environment.

Designer: Noi Creative for DeLonghi

The DeLonghi Capsule Desk Loop is a personal fan ceramic heater that you can place on your desk or wherever you are working so you can “work or relax in peace.” It has a special air grid design that brings you a convenient airflow speed and distribution when you need that soft warmth for your sedentary activities. The designers call the air grid the Flame pattern which actually creates an illusion of heat and flames from your heating source.

It looks like your typical heater but it’s small enough that you can carry it around with you and it’s also more stylishly designed. It is also more environmentally-friendly than most personal heaters as it uses 50% recycled plastic, a first for a DeLonghi product. It also uses 5.5 times lower energy consumption at just 360W, making it eco-friendly not just in the design but also in its function. It also is not as noisy as normal heaters as it just gives you a quiet 39dB operation so you can really work in peace without an annoying hum in the background.

Having a device that can create your very own micro-climate while working may not be a priority but it is pretty convenient to have especially if you work in places where you can get easily cold. That can solve some of the office arguments that can happen when there’s a mix of people who are either too cold or too warm.

The post DeLonghi portable heater is eco-friendly for your micro-climate needs first appeared on Yanko Design.

This Colorful & Playful Chair Will Give You A Break From Conventional Office Seats

Perfectly picked office furniture can truly set up a working space. It can create a comfortable and conducive environment that lets you work productively and comfortably. And one of the most important furniture pieces in an office is our chair. However, conventional office seats can be quite boring. They’re often mundane-looking, although we don’t doubt their functionality. In an attempt to spruce up typical office chairs, Scandinavian brand Fora Ferm released the Bud Chairs designed by Skogstad and Wærnes.

Designer: Skogstad and Wærnes for Fora Form

The Bud Chairs are a playful and whimsical alternative to the traditional office chairs we’ve probably come across all our lives. The designers wanted to create something that would support a collaborative and comfortable working environment, without being overly extravagant, or visually loud. “We wanted Bud to be able to stand alone and to function in larger numbers, without creating a wall of backrests,” said designer Fredrik Wærnes.

The chairs include a metal frame available in a variety of leg formations, including a variant with caster wheels. The frame supports a padded seat cushion and a cylindrical wraparound crafted from foam. The backrest has a spherical form accentuated with four narrow legs, that provide the seat with a contrasting yet geometrically intriguing form. It instantly stands apart from the conventional office chairs, as it seems to tether on the boundary between an office chair and a dining table chair, but somehow manages to safely stay rooted in the former group.

The different elements of the chair are available in a wide range of finishes, from a spectrum of fabrics to leather upholstery options. They can be repaired and replaced, an initiative on the part of the brand. The chair has plenty of bright color options to choose from, allowing you to add a pop of color to your work environment, breaking the monotony of a modern office space. Different colors can be mixed and matched to create a fun and vibrant office, where furniture pieces can and will serve as subtle mood uplifters.

The post This Colorful & Playful Chair Will Give You A Break From Conventional Office Seats first appeared on Yanko Design.

This is what it looks like to reenter Earth’s atmosphere from a space capsule’s POV

Incredible footage released by Varda Space Industries gives us a first-person view of a space capsule’s return trip to Earth, from the moment it separates from its carrier satellite in orbit all the way through its fiery reentry and bumpy arrival at the surface. Varda’s W-1 capsule landed at the Utah Test and Training Range, a military site, on February 21 in a first for a commercial company. It spent roughly eight months leading up to that in low Earth orbit, stuck in regulatory limbo while the company waited for the government approvals it needed to land on US soil, according to Ars Technica.

“Here's a video of our capsule ripping through the atmosphere at mach 25, no renders, raw footage,” the company posted on X alongside clips from reentry. Varda also shared a 28-minute video of W-1’s full journey home from LEO on YouTube.

Varda, which worked with Rocket Lab for the mission, is trying to develop mini-labs that can produce pharmaceuticals in orbit — in this case, the HIV drug ritonavir. Its W-1 capsule was attached to Rocket Lab’s Photon satellite “bus,” which the company said ahead of launch would provide power, communications and altitude control for the capsule. Photon successfully brought the capsule to where it needed to be for last week’s reentry, then itself burned up in Earth’s atmosphere, SpaceNews reported. Now that the capsule has returned, Ars Technica reports that the ritonavir crystals grown in orbit will be analyzed by the Indiana-based pharmaceutical company, Improved Pharma.

This article originally appeared on Engadget at https://www.engadget.com/this-is-what-it-looks-like-to-reenter-earths-atmosphere-from-a-space-capsules-pov-211120769.html?src=rss

This is what it looks like to reenter Earth’s atmosphere from a space capsule’s POV

Incredible footage released by Varda Space Industries gives us a first-person view of a space capsule’s return trip to Earth, from the moment it separates from its carrier satellite in orbit all the way through its fiery reentry and bumpy arrival at the surface. Varda’s W-1 capsule landed at the Utah Test and Training Range, a military site, on February 21 in a first for a commercial company. It spent roughly eight months leading up to that in low Earth orbit, stuck in regulatory limbo while the company waited for the government approvals it needed to land on US soil, according to Ars Technica.

“Here's a video of our capsule ripping through the atmosphere at mach 25, no renders, raw footage,” the company posted on X alongside clips from reentry. Varda also shared a 28-minute video of W-1’s full journey home from LEO on YouTube.

Varda, which worked with Rocket Lab for the mission, is trying to develop mini-labs that can produce pharmaceuticals in orbit — in this case, the HIV drug ritonavir. Its W-1 capsule was attached to Rocket Lab’s Photon satellite “bus,” which the company said ahead of launch would provide power, communications and altitude control for the capsule. Photon successfully brought the capsule to where it needed to be for last week’s reentry, then itself burned up in Earth’s atmosphere, SpaceNews reported. Now that the capsule has returned, Ars Technica reports that the ritonavir crystals grown in orbit will be analyzed by the Indiana-based pharmaceutical company, Improved Pharma.

This article originally appeared on Engadget at https://www.engadget.com/this-is-what-it-looks-like-to-reenter-earths-atmosphere-from-a-space-capsules-pov-211120769.html?src=rss

25 Household Hacks That Make Cleaning A Breeze

Cleaning frequency depends on lifestyle and can feel like a looming task. There’s always a lot of cleaning to be done but with limited time and little desire to spend hours scrubbing after work, an efficient solution is needed. Thankfully, results can be achieved without dedicating hours and using ingredients already on hand, avoiding the need to buy more eco-friendly cleaning products. Here are some tried and tested tips to get you going.

Designer: Roborock

1. Refresh Microwave with Steam

Image courtesy of: leungchopan

Steam-clean your microwave by placing a bowl of lemon juice inside and microwaving it for 2 minutes, or until the lemon juice boils. This trick generates steam that helps loosen any residue clinging to the microwave walls. Afterward, wipe down the interior with a cloth, leaving behind a refreshing citrus aroma.

2. Eliminate Wine Stains on Carpets

Image courtesy of: gcpics

Although wine stains can pose a challenge, there’s a solution with club soda. Start by spraying the stain with club soda, then gently blot it with a microfiber cloth. Repeat this procedure until the stain disappears. Note that rubbing alcohol, clear vodka, and even white wine can be utilized for this cleaning technique.

3. Clean your Ceiling Fan Using a Pillowcase

To clean fans, cover each blade with a pillowcase and wipe. This ensures dust is collected inside the pillowcase instead of settling on your furniture and floors.

4. Clean Blinds with Socks

Image courtesy of: marshmallowbela

Start by placing an old sock on one hand and lightly moistening it with water. Next, grasp each blind panel and glide your hand covered with the sock along the length of the slats, effectively removing dust from both sides.

5. Remove Water Marks with Shaving Cream

Image courtesy of: SkloStudio

Remove water stains from shower glass effectively using shaving cream. Simply apply the shaving cream, let it sit for 15 minutes, then wipe it off.

6. Shine with Lemon Oil and Vinegar

Image courtesy of: LightFieldStudios

Woodwork and wooden furnishings accumulate dust and dirt with time, requiring regular cleaning to maintain their shine. For an eco-friendly and shiny cleaning hack, combine equal parts lemon oil and white vinegar.

7. Eliminate Hard Water Stains

Image courtesy of: Vailery

Remove hard water stains by soaking paper towels in undiluted vinegar, placing them on the buildup overnight, then scrubbing and rinsing.

8. Use Microfiber Dusters

Image courtesy of: towfiqu98

Clean efficiently with microfiber products, which use an electrostatic charge to attract and hold dust. They outperform traditional methods like dry rags and feather dusters. Machine-washable and reusable, they save money over disposable options. Air dry them for continued softness, and avoid bleach or fabric softener to maintain effectiveness.

9. Polish Surfaces Using Olive Oil

Image courtesy of: hannievanbaarle

Buff surfaces, such as stainless-steel pots, pans, and appliances, with olive oil applied on a soft cloth in circular motions to effectively clean and polish them.

10. Freshen your Garbage Disposal with Lemons

Image courtesy of: ThamKC

Freshen and cleanse your garbage disposal by using lemons or limes. Given the regular dirty work it handles, maintaining cleanliness and preventing clogs is crucial. Simply cut the citrus fruit into quarters, and with the water running, insert the pieces one by one into the disposal.

11. Use Rubber Gloves to Eliminate Pet Hair

Image courtesy of: karmanovalive

To tackle pet hair that your regular vacuum may miss, opt for rubber gloves, which effectively gather remaining hair when rubbed against fabric due to their elasticity. Simply slide them on, rub down areas needing extra cleaning, and then rinse the gloves under running water to remove the collected hair.

12. Freshen Upholstery

Image courtesy of: towfiqu98

Banish unpleasant odors from upholstery by blending vinegar, water, and a preferred essential oil like lavender. Pre-test the solution on a hidden spot for colorfastness before applying it to the rest of the upholstery, as it often retains odors. If safe, spray the mixture on the remaining upholstery, then vacuum once dry.

13. Clean the Mattress

Image courtesy of: friends_stock

Refresh your mattress by combining baking soda and vinegar. Spray vinegar on the mattress, sprinkle with baking soda, cover with a towel, and let sit for one to two hours before vacuuming. Another method that can be used for mattress cleaning is to employ a garment steamer to thoroughly treat the top, sides, and box springs, eliminating dust mites. Follow up with your vacuum’s upholstery tool to remove deceased mites. Address stains with a carpet and upholstery cleaner, ensuring not to over-wet the mattress.

14. Clean the Gadgets

Image courtesy of: towfiqu98

Utilize damp microfiber cloths to clean shared tech like TV remotes, keyboards, and game controllers, followed by disinfectant-treated cloths for germs. Make sure to keep surfaces wet for 5 minutes, then wipe dry with a microfiber cloth. Repeat twice weekly. For keyboard crevices, tap gently and use a folded sticky note to remove stubborn dirt

15. Clean the Grout

Image courtesy of: AtlasComposer

Clean grimy grout by making a paste of baking soda and water, applying it with an old toothbrush, spraying vinegar over it to create a bubbling mixture, scrubbing with a brush or old electric toothbrush head, and rinsing tiles well with water afterward.

16. Cut the Dirt

Image courtesy of: Andy_Dean_Photog

To keep dirt out of the house, use a high-quality dirt-trapping doormat. Regularly shake it outside and vacuum it weekly. Check if it’s machine washable, but be cautious as some mats may be heavy when wet.

17. Sparkling Clean Windows

Image courtesy of: Tatiana_Mara

Achieve sparkling windows by spraying a solution of one part distilled white vinegar to nine parts water onto the glass and wiping it with a lint-free cloth. Then, use a chamois leather or glass polishing microfiber cloth to buff them to a brilliant shine.

18. Use Soda Crystals

Soda crystals are versatile cleaners, useful for deodorizing washing machines, removing burnt-on residue from pans, keeping sinks and drains fresh, and clearing moss and algae from patios. To unclog plugholes and drains, pour in half a cup of soda crystals followed by boiling water, but remember to wear gloves as they can irritate the skin.

19. Use Lemon to Clean the Cutting Board

Image courtesy of: BLACKDAY

To freshen up your wooden cutting board, sprinkle salt on it and scrub it with half a lemon. Rinse and repeat if necessary for a clean board.

20. Refresh your Refrigerator

Image courtesy of: davidpereiras

Freshen up your refrigerator with the aroma of coffee. Just place dry ground coffee in a bowl inside the fridge. The coffee grounds will absorb any unpleasant odors, keeping your fridge smelling clean and fresh.

21. Scrub your Cast Iron with a Potato

Image courtesy of: AtlasComposer

Clean your cast-iron skillet with a potato. Sprinkle salt inside, then use a halved potato to scrub in circles. Rinse and dry.

22. Clean the Coffee Maker

Image courtesy of: evgrafovasa

Clean your coffee maker with vinegar. Fill the chamber with equal parts vinegar and water, then run the machine. Flush with water afterward. Repeat until clean.

23. Renew Cloudy Glasses

Image courtesy of: magone

Restore clarity to cloudy glasses by soaking them in white vinegar for five minutes to dissolve hard-water mineral buildup. Hand rinse and dry with a microfiber cloth for sparkling results

24. Make an All-Purpose Cleaner

Image courtesy of: tenkende

Create a versatile kitchen cleaner with this homemade recipe. Mix four tablespoons of baking soda with one quart of warm water in a spray bottle. Apply to surfaces and wipe away messes with a sponge. Rinse with a damp cloth if necessary.

25. Clean your Sponge

Image courtesy of: larisikstefania

Keep your sponge bacteria-free by microwaving it for 30 seconds or running it through the dishwasher. Remember to let it cool before use.

The post 25 Household Hacks That Make Cleaning A Breeze first appeared on Yanko Design.

Two toppled moon landers go dormant for a lunar night they may not survive

Lunar night has come around again, presenting yet another test for the two landers that recently arrived on the moon’s surface. Both Japan’s SLIM spacecraft and Intuitive Machines’ Odysseus have gone to sleep for the two-week-long stretch of darkness, the two teams confirmed at the end of this week. There’s no guarantee that they’ll be able to resume operations afterward, but they’ll try to reestablish contact when the time comes.

While the solar powered landers weren’t built to withstand the frigid lunar night, SLIM — which has been on the moon since January 19 — has already beaten the odds before to pull through last month. It’ll be the first lunar night for Odysseus, which landed on February 22. 

The missions, though successful in that the spacecraft survived their respective descents to the surface, stand as further examples of how challenging it is to land on the moon; both landers fell over, leaving them stuck in non-ideal positions. SLIM face-planted, and Odysseus broke a leg and tipped onto its side.

SLIM has been able to capture a few images from the surface, and the team shared another look at the Shioli crater from its perspective on Thursday before it powered down. Odysseus has sent home some pictures too from its wide-angle camera, including one last transmission before lunar night that shows a portion of the lander and the surface of the moon, with a tiny crescent Earth in the distance. But the world has eagerly been awaiting third-person POV pictures from the EagleCam made by students at Embry-Riddle Aeronautical University, which hitched a ride with Odysseus. Unfortunately, that doesn’t seem likely to happen at this point.

The camera wasn’t deployed as originally planned before the moment of touchdown, and while Intuitive Machines said this week that the team was able to power it up and eject it after Odysseus reached the surface, communications with the camera so far aren’t working. “The Embry‑Riddle team is working on that and wrestling with that to see if there’s anything they can do,” Intuitive Machines CEO Steve Altemus said on Wednesday. The onset of lunar night isn’t going to help those odds.

This article originally appeared on Engadget at https://www.engadget.com/two-toppled-moon-landers-go-dormant-for-a-lunar-night-they-may-not-survive-182451657.html?src=rss

Two toppled moon landers go dormant for a lunar night they may not survive

Lunar night has come around again, presenting yet another test for the two landers that recently arrived on the moon’s surface. Both Japan’s SLIM spacecraft and Intuitive Machines’ Odysseus have gone to sleep for the two-week-long stretch of darkness, the two teams confirmed at the end of this week. There’s no guarantee that they’ll be able to resume operations afterward, but they’ll try to reestablish contact when the time comes.

While the solar powered landers weren’t built to withstand the frigid lunar night, SLIM — which has been on the moon since January 19 — has already beaten the odds before to pull through last month. It’ll be the first lunar night for Odysseus, which landed on February 22. 

The missions, though successful in that the spacecraft survived their respective descents to the surface, stand as further examples of how challenging it is to land on the moon; both landers fell over, leaving them stuck in non-ideal positions. SLIM face-planted, and Odysseus broke a leg and tipped onto its side.

SLIM has been able to capture a few images from the surface, and the team shared another look at the Shioli crater from its perspective on Thursday before it powered down. Odysseus has sent home some pictures too from its wide-angle camera, including one last transmission before lunar night that shows a portion of the lander and the surface of the moon, with a tiny crescent Earth in the distance. But the world has eagerly been awaiting third-person POV pictures from the EagleCam made by students at Embry-Riddle Aeronautical University, which hitched a ride with Odysseus. Unfortunately, that doesn’t seem likely to happen at this point.

The camera wasn’t deployed as originally planned before the moment of touchdown, and while Intuitive Machines said this week that the team was able to power it up and eject it after Odysseus reached the surface, communications with the camera so far aren’t working. “The Embry‑Riddle team is working on that and wrestling with that to see if there’s anything they can do,” Intuitive Machines CEO Steve Altemus said on Wednesday. The onset of lunar night isn’t going to help those odds.

This article originally appeared on Engadget at https://www.engadget.com/two-toppled-moon-landers-go-dormant-for-a-lunar-night-they-may-not-survive-182451657.html?src=rss