Tag Archives: Gadgets

ADATA XPG Nia handheld gaming PC brings a bit of ergonomics and sustainability

Posted on by

Although they have existed for a long time now, it seems that handheld PCs are finally taking root in the market. These mobile gaming devices are becoming more numerous, including a few from well-known manufacturers as well as a bit more obscure brands. That, unfortunately, also means that some designs are getting all too common, even if there’s still plenty of room for experimentation and innovation. At Computex 2024, we’re seeing some of these bold designs that are trying to challenge the status quo and one of them comes from an unlikely name yet could also be bringing some much-needed improvements to handheld gaming computers.

Designer: ADATA XPG

Handheld PCs are pretty much miniature laptops and they even use some of the same hardware but with weaker cooling solutions. That practically means you’re stuck with the specs you got when you bought the device, though there might be options to upgrade the storage and only that. Many laptops these days, however, also have upgradable RAM, and ADATA, a brand better known for its data storage solutions, is bringing that to the handheld PC market with the XPG Nia.

This feat is being attributed to the equally new LPCAMM2 memory module which, unlike most RAM on handhelds and some laptops, isn’t soldered to the motherboard. This makes memory upgradable in theory, though how easy it will be still remains to be seen. The XPG Nia also features upgradable storage courtesy of a more standard M.2 2230 SSD slot. This might sound like minor improvements since the capability has been around in laptops for many years, but it goes a long way in making handhelds last longer and be more sustainable in their own small way.

That isn’t the only novelty that the ADATA XPG Nia is bringing to the table, however. The handheld has a tilting screen that you can adjust to your comfort, and it has a built-in kickstand that lets you put the device down on a table without requiring a separate stand or dock. And unlike the majority of handheld gaming PCs, it has a front-facing camera that can be used for eye-tracking and, possibly, video chat among gamers. Again small details, but ones that significantly improve the usability and ergonomics of a device that still hasn’t cemented its place in the market.

As admirable as these improvements might be, the big drawback to the ADATA XPG Nia is that it’s not a product you can buy, at least not any time soon. What was shown at Computex was just a prototype, and the earliest ETA for the handheld PC is 2025. That leaves not only a lot of room for the brand to change or even backtrack on these features, it also gives its competitors the opportunity to steal the limelight even before the XPG Nia has a chance to get out the door.

The post ADATA XPG Nia handheld gaming PC brings a bit of ergonomics and sustainability first appeared on Yanko Design.

Cooler Master MasterHUB modular control system adjusts to creators’ workflows

Posted on by

Content creation these days looks so simple the way influencers like to show off in behind-the-scenes videos, but the reality is that they can be overwhelmingly complex as the content they create, especially as they level up their craft. While it’s definitely possible to stick to the tried and true keyboard, mouse, or drawing tablet, the demands of today’s creators and their audiences call for better tools that help make their lives easier. That said, no two artists or designers are alike, and they work in different ways with different techniques, tools, and processes. Most gadgets and devices try to force users to a specific way of working, but this modular stream kit lets you decide not only the specific controls that you need but even the layout that you want.

Designer: Cooler Master

As the name implies, stream kits were originally designed for live streamers as they usually need to access some functions quickly without having to perform finger calisthenics over their keyboard. Over time, however, the flexibility of these programmable buttons with tiny LCD displays has become a favored tool by many content creators, from designers to artists to video editors to general enthusiasts. The MasterHUB comes from this lineage but has one special power that very few have: it can change its shape to adapt to your needs, workflow, or even your whim!

The MasterHUB’s foundation is a base where you can mix and match modules that each deliver a different kind of control. The most common of these is the App Control with 15 programmable keys, each with a customizable display, that can be used to trigger an action or launch an app. Another module is the Encoder which is a large dial with an integrated circular LCD display that can be used for something like scrubbing through audio and video timelines. A Knob Module has three knobs that can be mapped to changing brush sizes, undoing and redoing steps, and similar actions. Completing the set is a Fader Precision module with five sliders and a Roller Scroll Module with two rolling bars.

This modular system allows creators to define the layout out of their control center. They can even set it up vertically instead of the conventional horizontal layout, and you can pretty much change the combination on a whim, presuming you’re prepared to do the work of setting up the configuration again. Such a flexible control hub will also benefit even computer users who don’t create content, like gamers and power users that need more knobs and buttons than their keyboard can provide. Availability details for this powerful creativity tool, unfortunately, are still unavailable at the moment.

The post Cooler Master MasterHUB modular control system adjusts to creators’ workflows first appeared on Yanko Design.

Forest fire sensor system can detect danger within the first 15 minutes

Posted on by

We’ve seen a lot of horrible forest fires that have destroyed homes, properties, and whole ecosystems in an area. We see such destruction just because someone did not put out a cigarette properly or through an accident or even through a natural phenomenon. If there were better wildfire detection systems in place then maybe the damage would have been lessened or even prevented. This award-winning sensor system hopes to solve that problem and help save forests from future wildfires.

Designers: Suat Batuhan Esirger and Rana Imam

ForestGuard is a sensor system that is able to detect fires in real-time through its IoT-based, satellite-connected system. The devices are fixed on tree trunks through flexible, elastic straps that will not intervene with the tree’s growth. It is fixed at a height of 3 meters and can be placed every 16 hectares if you want an entire forest to be monitored. It also has a machine-learning algorithm that will be able to tell whether the smoke is from a vehicle’s exhaust, someone smoking a cigarette, or whether it’s an actual forest fire.

The modules actually have wide-spectrum sensors that will be able to measure gas levels, temperature, humidity, air pressure, and air quality for different scenarios. The sensor modules will transmit the data to GeoStationary satellites that will beam it back to earth and to the servers. Reaction time of authorities and firefighters can be reduced to under 15 minutes if everything works properly and the emergency condition is verified.

They have integrated Li-Ion Hyper Capacitors with the solar panels so the devices themselves will not cause a fire even if under extremely hot conditions. There is also an internal gyro sensor for anti-tamper and anti-theft features. The case manufacturing uses forest-collected plastics to helo reduce environmental impact. Hopefully more forest systems get to adapt this sensor system and help reduce the number of dangerous forest fires that occur in various places.

The post Forest fire sensor system can detect danger within the first 15 minutes first appeared on Yanko Design.

Music mixer concept uses generative AI to help you create music

Posted on by

I have a lot of respect for those people who can create music on their own, especially ones that are able to produce earworm-y pop riffs. Sometimes I’ve thought about studying how to create and mix music especially now that there are equipment, apps and websites where you can do that, but you need to study a lot of things before you can actually use them. Sometimes I think, can’t I just have something in my head transferred to a machine without having to do so much work? Well, thanks to artificial intelligence, that is somewhat possible, for better or worse.

Designer: Haechan Ryu

Happy Music Mixer 07 or HPMXR 07 is a music mixer that is powered by generative AI. This means, even if you don’t have knowledge on how to use mixers, you should be able to use this machine. The goal for this concept is to democratize composing music and using AI to help out with that. There are some ongoing issues in the music industry of course about using AI but it’s still an ongoing conversation that will continue to evolve. But if you are not hesitant to use AI to fuel creativity and things like music creation, then this should be of interest to you.

The machine looks like your typical synthesizer except that it is designed to not look so intimidating, with a clean interface and layout that should be easy to understand. The first step to using it is to describe the music that you’re thinking of, setting the length, tempo, mood, genre, prompt, mixing, and other things that may be in your brain. You can also even generate an album cover that will match your song. Once the AI has generated the song, you can also mix and adjust it according to your preference before transferring the completed song through an NFC card or a USB-C type connector.

All the buttons, knobs, and keyboard are designed in an intuitive interface. The housing of the HPMXR 07 is made from aluminum and has a monochromatic color with orange highlights. The switches and stabilizers have a tactile interface so you still feel in control even as the AI helps you generate the music that is in your head. It’s a good toy to play around with if you want to experiment with creating music but you don’t have the ability to understand more complicated mixers and synthesizers.

The post Music mixer concept uses generative AI to help you create music first appeared on Yanko Design.

The AirTag that Apple should have built: Nomad’s GPS tracking card comes with Apple ‘Find My’ support

Posted on by

It’s the size of a credit card, fits in your wallet, works with Apple’s Find My network, and most importantly, charges wirelessly so you don’t need to worry about batteries or ditching the entire device altogether after a year of use. Meet the Nomad Tracking Card, a slick tracking device that makes you wonder why Apple made something as bulky as the AirTag. At just 2mm thin, it’s about as thick as 2 credit cards together, making it discreet enough to slip in anywhere, whether it’s your wallet, your backpack, or even your jacket pocket, giving you the ability to track your belongings through Apple’s global device tracking network.

Designer: Nomad

Anyone who knows me knows how much I think the AirTag needs a redesign. Apple made the tracking device back in 2019 to be used with bags and keys, but didn’t think of the potential of having a card-shaped tracker for your wallet and pockets. It’s been 5 years since the AirTag made its first appearance and rumors about an AirTag 2.0 are so few and far apart, it’s almost as if Apple’s left it up to third party creators to make better trackers that work with its devices.

That’s where Nomad’s Tracking Card comes in. It’s slim, compact, and manages to fit an impressive amount of tech inside its design. The card sports a polycarbonate body, known for its toughness and impact resistance, and comes with a GPS tracker, an NFC for pairing, a battery that runs for 5 months on a full charge, and a MagSafe-compatible wireless charging coil that lets you charge your card when its battery runs out. A graphic on the card tells you where the wireless coil is located, so you can simply attach the Tracking Card onto a MagSafe charger or place it on a wireless charging mat and it begins recharging. No replaceable batteries, no single-use design, no wastage.

Nomad’s website doesn’t mention the presence of a built-in speaker like you would have with the AirTag. Useful for being able to ‘hear’ where your tracking device is, or for alerting you if stolen or left behind, the speaker can be quite a nifty feature. The Tracking Card is, however, IPX7 water and dust-proof, and starts at $40.

The post The AirTag that Apple should have built: Nomad’s GPS tracking card comes with Apple ‘Find My’ support first appeared on Yanko Design.

Ultimate 140W GaN Travel Adapter gives you Power to Charge All Your Devices Anywhere You Go

Posted on by

It’s 2024, and if you’re still carrying multiple plugs, charging cables, and a travel adapter every time you visit a different country, you’re living an incomplete life. Chargers have evolved over the years, charging bricks have become slimmer and more powerful, and something as simple as the SWIFT PRO can technically charge your phone, tablet, laptop, handheld gaming device, and AirPods together at the same time, anywhere in the world. The world’s only travel adapter running on 4th-gen GaN technology, the SWIFT PRO offers a staggering 140W of power that can charge multiple devices at the same time. That amount of power is enough to even fast-charge all your devices together, so you’re never waiting hours to get your iPad or smartphone fully charged. Moreover, it works internationally, and is the same size as your regular travel adapter, eliminating the need to travel with multiple charging bricks… or even work from home with a cluttered power strip and multiple plugs and wires strewn across your desk.

Designer: iBlockCube Team

Click Here to Buy Now: $68 $103 (34% off) Hurry! Only 13 of 105 left.

The iBlockCube SWIFT PRO may look like your average travel adapter, but it’s also an all-in-one charging solution. Designed with a multi-plug framework that lets it work with different socket types across multiple countries, the SWIFT PRO slides right into your backpack or travel bag, going everywhere you go. In fact, it’s good enough to use at home too, helping you charge multiple devices together. Like any traditional travel adapter, it has switches on the side that let you deploy the plug type depending on what country you are in. It has a universal AC outlet too, allowing you to plug in appliances, chargers, or other devices, but look to its bottom and you’ll see three USB-C ports for connecting devices and gadgets directly to the SWIFT PRO. A USB-A port on the side gives you the ability to hook yet another device, allowing you to plug a total of 5 gadgets at the same time.

The reason the SWIFT PRO can handle 5 concurrent gadgets is thanks to 4th gen GaN technology. A replacement for silicon carbide, GaN has much better power efficiency as a semiconductor material, helping deliver energy without heat loss. This means more powerful, and thinner charging blocks. The SWIFT PRO has an overall output of 140W, which makes it powerful enough to simultaneously fast-charge your laptop, phone, AND a tablet – something that clunky chargers couldn’t do 10 years ago.

This effectively translates to being able to travel light. All you need is the SWIFT PRO along with a few cables for your devices. The plug on the front can be used for a hairdryer or charging your electric razor while traveling, while the USB-C and USB-A ports on the bottom and sides can effectively juice your laptop, phone, tablet, and AirPods or Watch all together. Two of the USB-C ports can output up to 140W, letting you divert full power to a single laptop, while a third USB-C port caps at 20W, and the USB-A port caps at 18W. Plug multiple devices in and the SWIFT PRO automatically adjusts power delivery to each device, ensuring that all your gadgets get the right amount of fast-charging capacity. The charger will also intuitively cap the power to match your device’s highest charging requirements, protecting your gadgets from damage.

The AC outlet on the front outputs 1000W at 100V and 2500W at 250V, complying with global standards. The 140W gets distributed between the USB ports. The SWIFT PRO is perfect for charging all your gadgets, whether it’s the traditional laptop, tablet, phone, watch, and TWS earbuds, or even a drone, camera, handheld gaming device, hairdryer, or electric razor. A 10A dual-fuse keeps your devices safe from surges, and the GaN semiconductor doesn’t heat up as much as silicon carbide, ensuring efficient power delivery.

The SWIFT PRO comes in 3 color options, white, black, and tinted transparent. The travel adapter measures 3.5 inches tall, 1.9 inches wide, 2.1 inches deep, making it small enough to easily travel with. Each SWIFT PRO also ships with a small travel pouch for your adapter, and a lanyard cable that opens up to transform into a USB-C to USB-C charging cable just in case you end up running short! The SWIFT PRO is priced at a discounted $68 and ships globally starting July 2024.

Click Here to Buy Now: $68 $103 (34% off) Hurry! Only 13 of 105 left.

The post Ultimate 140W GaN Travel Adapter gives you Power to Charge All Your Devices Anywhere You Go first appeared on Yanko Design.

Keychron B1 Pro: Ultra-Thin Wireless Keyboard for Minimalists on the Go

Posted on by

It may not have the mechanical joy that the Lofree EDGE offered as the world’s slimmest mechanical keyboard, but the Keychron B1 Pro does offer an incredibly slim design that’s portable enough to slide right into your backpack. Boasting a minimal aesthetic bundled within a portable design, the B1 Pro is an ultra-slim wireless keyboard that comes with a whopping 1200 battery life and a rather commendable $39.99 price tag.

Designer: Keychron

The B1 Pro deviates from Keychron’s usual mechanical keyboards by opting for scissor-switch keys, similar to those found on laptops. This design keeps the profile incredibly thin, measuring just 5.2mm at the front and reaching a maximum height of 14.5mm. It’s incredibly lightweight too, at only 425g, making it a perfect companion for tossing in your bag and working from anywhere.

Despite its slim profile, the B1 Pro doesn’t compromise on performance. With a 1000Hz polling rate on the 2.4GHz wireless connection, you can expect smooth and responsive typing. It also offers Bluetooth 5.2 connectivity, allowing you to seamlessly pair it with multiple devices. This is also accompanied by a battery life of a staggering 1200 hours on a single charge. Translated to real-world use, that translates to roughly 8 months of typing for 5 hours a day – a near elimination of charging woes.

The keyboard has a Mac layout while remaining functional with Windows and Linux. It even features the same multimedia and function key functions as Apple keyboards, providing a familiar experience for Mac users with the added benefit of a more comfortable typing experience thanks to the scissor-switch keys. For added comfort during extended typing sessions, the B1 Pro features a 3.2-degree tilt angle and concave keycaps designed to improve accuracy. It even comes with a dedicated emoji shortcut key and a protective silicone keycap cover for increased durability.

The B1 Pro supports ZMK firmware, allowing users to program keys, macros, and shortcuts directly through a web interface. This eliminates the need for complex software installations and provides a user-friendly way to tailor the keyboard to your specific needs.

At an affordable price point of $39.99, the Keychron B1 Pro offers a compelling combination of portability, functionality, and battery life. Whether you’re a minimalist on the go, a student juggling classes, or someone who simply prefers a low-profile keyboard, the B1 Pro is definitely worth considering.

The post Keychron B1 Pro: Ultra-Thin Wireless Keyboard for Minimalists on the Go first appeared on Yanko Design.

Handheld printer and scanner concept sticks to tried and true methods of document handling

Posted on by


We live in a world filled with apps, multimedia content, and digital data, but there are and will always be things written on printed on paper. Official documents are still printed, receipts are still physical, and some people still prefer writing on notebooks and notepads. The gap between physical and digital isn’t that easy to bridge for people who want or even need to have the best of both worlds, even though there are, ironically, a handful of products claiming to offer the perfect solution. As some say, there is no perfect answer, but the best one might actually be the simplest and most straightforward. This concept device, for example, offers what looks like a traditional printer and scanner combo, except it’s something that you can easily store and take from your bag whenever and wherever you need it.

Designer: John Branca

There are quite a few product designs these days that try to unify physical and digital documents, from notebooks and pens that can record your handwriting to smartphone apps that can convert printed or even handwritten text into digital ones. The former doesn’t exactly work for digitizing what’s already printed, while the latter puts the burden on the person taking a perfect photo of the paper. These solutions also don’t work in the reverse, like turning digital files into their physical form, especially when you’re out of the office or not at home.

Scribe is a concept design that combines two things that already exist today, a portable printer and a portable scanner. In a nutshell, it shrinks 2-in-1 printer and scanner combos into a compact design that you can even carry in your hand if necessary. It has an industrial-inspired aesthetic that moves away from the predominant minimalist style, making it distinctive and memorable. It also has a large touch display that makes operating the device simple and intuitive without having to fumble on your computer or phone.

The device uses a feed-type mechanism where a piece of paper slides through the box to get printed or scanned. This does have the limitation of accommodating certain paper sizes only, though that will most likely be the most common use case for scanning receipts and printing out notes. That said, you won’t be able to scan any bound material like notebooks and books, so forget about taking this to the library. Due to size constraints, there’s also only room for a single black inkjet cartridge. ZINK technology might be more compact, but that also requires using special, non-standard paper.

1

Scribe is definitely an interesting break from all the app-based, smartphone-centric solutions out there, though it still raises the question of whether it’s more convenient or not. Then again, you can’t print from your phone either, so if you’re going to bring a portable printer with you, might as well have something that can also scan those documents as well.

The post Handheld printer and scanner concept sticks to tried and true methods of document handling first appeared on Yanko Design.

Cyberpunk device is actually a functional 4-in-1 charger for Apple devices

Posted on by

There are plenty of wireless chargers now in the market, many of which are designed for iPhones, Apple Watches, and AirPods. And just like the Apple devices they support, the majority of these have designs that try to match the minimalist aesthetics of Apple’s products. There’s no argument that they’re appealing and even beautiful, but sometimes the uniformity of design can be a bit boring and unsatisfying. There’s always room for variety, and thankfully, some accessory makers are indeed taking up the challenge without going overboard. This design, for example, still manages to adopt a clean look even while adopting a more cyberpunk or sci-fi style that puts a new flavor to the typical charging pad.

Designer: Aulumu

It’s common for Apple-compatible wireless chargers these days to support all three devices. After all, it’s highly likely that an iPhone owner would have the other two accessories and would want to charge all three at the same time. The conventional design is to either have a flat surface for these devices or to have one raised and angled platform to have the iPhone charge at a more usable angle. The Aulumu M01 4-in-1 Wireless Charging Station’s foldable design supports both modes, but that’s not exactly the most interesting thing about it.

What makes it special is its style, particularly the cyberpunk-like aesthetic it adopts. Rather than a straightforward row of circles for the wireless charging contacts, it alternates their arrangement to have a more visually interesting composition. The colors also alternate, with the white Apple Watch pad flanked by the black circles for the iPhone and AirPods case. It has the typical lines, text, and visible screws you’d find in this technology-centric design language, clearly separating it from the crop of wireless chargers.

Another interesting and uncommon detail is an LED light encased in what looks like a miniature vacuum tube bulb. It functions as a desk night light with three different levels of brightness, though not bright enough to be your only source of light. It gives the charging station a retro-futuristic image that you’d often find in cyberpunk designs.

In terms of functionality, Aulumu M01 even goes beyond your typical 3-in-1 charger by supporting the iPad as well, though you’ll have to connect that using a USB-C cable. The cyberpunk design definitely won’t sit well with everyone, but it offers a breath of fresh air for those who’re already tired of looking at minimalist designs everywhere they turn.

The post Cyberpunk device is actually a functional 4-in-1 charger for Apple devices first appeared on Yanko Design.

Logitech Debuts Wave Keys for Mac: Ergonomic Keyboard for Apple Enthusiasts

Posted on by

In an exciting announcement today, Logitech expanded its “Designed for Mac” lineup with the introduction of the Wave Keys for Mac, an ergonomic keyboard crafted to provide comfort and enhance productivity for Mac users. This launch, set to coincide with the release of other Mac-centric peripherals in Logitech’s portfolio, underscores the company’s commitment to creating seamless, user-friendly experiences within the Apple ecosystem.

Designer: Logitech

Ergonomics Meets Mac-Specific Design

The Wave Keys for Mac stands out as Logitech’s first ergonomic keyboard specifically designed for the Mac, adapted from the Wave Keys that launched at the end of last year. Emphasizing comfort and usability, it features a signature wave shape that ensures a natural typing posture. This wavy design positions the hands, wrists, and forearms in an optimal manner, reducing strain and promoting comfortable typing throughout the day.

A key highlight of the Wave Keys for Mac is its cushioned palm rest, which comprises three layers: memory foam, high-density foam, and a knitted fabric covering. This thoughtful design offers 57% more wrist support compared to traditional Logitech keyboards without palm rests, making it an ideal choice for prolonged use.

Compact and Versatile

The compact layout of the Wave Keys for Mac is not only space-saving but also strategically designed to promote a more natural shoulder position while using a mouse. This makes it a practical addition to any desk setup, particularly for those who prioritize ergonomics without compromising on functionality.

Further enhancing its appeal, the keyboard includes easy-to-use +4° tilt legs, allowing users to adjust the keyboard’s angle to their preference for maximum comfort.

Seamless Integration and Personalization

Logitech’s commitment to enhancing user experience is evident in the Wave Keys for Mac’s seamless integration with macOS, iPadOS, and iOS devices. Users can connect up to three Apple devices simultaneously and switch between them effortlessly with the tap of a button. This multi-device capability is complemented by the Logi Options+ app, which enables users to personalize their keyboard shortcuts and optimize their workflow.

The Wave Keys for Mac also boasts an impressive battery life, capable of lasting up to three years on the included AAA batteries, reducing the need for frequent replacements and ensuring consistent performance.

Sustainable Design

In line with Logitech’s dedication to sustainability, the Wave Keys for Mac is made with 48% post-consumer recycled plastic, excluding the plastic in the printed wiring assembly, receiver, and packaging. This eco-friendly approach aligns with Logitech’s broader initiative to reduce the carbon footprint of its products and promote environmentally conscious manufacturing practices.

This launch is part of a broader initiative by Logitech to cater to the needs of Mac users. Alongside the Wave Keys for Mac, Logitech is also introducing other products such as the MX Keys S for Mac, MX Keys S Combo for Mac, MX Anywhere 3S for Mac, and MX Keys Mini for Mac. These additions are designed to enhance productivity, streamline workflows, and ensure ergonomic comfort for Mac users.

Delphine Donné, Vice President and General Manager of Personal Workspace Solutions at Logitech, highlighted the company’s focus on integrating user-centric solutions with the Apple ecosystem while maintaining a strong commitment to sustainability. “With a focus on optimizing workflow, productivity, and comfort, our Designed for Mac portfolio empowers Apple users to unleash their creative potential and enjoy day-long comfort at the desk without sacrificing Mac compatibility and look,” said Donné.

The Wave Keys for Mac will be available for purchase in May 2024 at a price of $59.99.

The post Logitech Debuts Wave Keys for Mac: Ergonomic Keyboard for Apple Enthusiasts first appeared on Yanko Design.