Tag Archives: Product Design

AYANEO Just Built a 115Wh Strix Halo Handheld and Killed Portability

Posted on by

Gaming handhelds are supposed to fit in your hands, but AMD’s new Strix Halo processors generate serious heat and drain batteries faster than you can finish a boss fight. The GPD Win 5 and OneXFly Apex responded by strapping external battery packs to their backs, which works, but looks like your handheld is wearing a fanny pack in the wrong spot. It’s practical but awkward, and it raises an obvious question: if you’re adding external batteries anyway, why not just make the whole device bigger?

AYANEO apparently asked that same question and decided to run with it. The AYANEO NEXT II skips external packs entirely, hiding a massive 115Wh battery and a 9.06-inch OLED inside a thick, sculpted body that feels more like a portable gaming monitor with grips than something you’d slip into a backpack. It’s AYANEO’s answer to Strix Halo’s power demands, and the solution involves simply accepting that this thing was never going to be pocketable in the first place.

Designer: AYANEO

The design doesn’t apologize for its size. Deep grips flare outward like a proper gamepad, and the body is thick enough to house dual cooling fans without turning into a space heater. Hall effect sticks sit where your thumbs expect them, surrounded by a floating D-pad, dual touchpads, and speakers that actually face you instead of firing sound into your lap. It looks less like a Switch rival and more like someone decided gaming monitors needed handles attached.

That 9.06-inch screen uses an unusual 3:2 aspect ratio instead of the typical widescreen shape most games expect. You get a gorgeous OLED panel with refresh rates up to 165Hz and brightness that peaks at 1100 nits, which sounds fantastic until you realize most games will either add black bars or run nowhere near 165 frames per second at this resolution anyway. Still, it’s lovely for desktop windows and emulators that appreciate the extra vertical space.

The 115Wh battery is where things get complicated. Everything stays hidden inside for a cleaner look and more console-like feel, but that capacity might cause questions at airport security since many airlines cap carry-on batteries at 100Wh. You also can’t swap batteries when one dies, and constantly feeding an 85-watt processor means faster charge cycles and potential long-term wear. You’re looking at two to three hours of heavy gaming before hunting for an outlet.

The dual cooling fans work hard to keep Strix Halo from overheating, and you’ll definitely hear them during intense sessions. AYANEO claims it can sustain up to 85 watts, which should let the integrated Radeon graphics handle modern games at respectable settings, though you’ll also feel warmth radiating from the vents. This is less a grab-and-go portable and more something you carry from the couch to the desk when you need a scenery change.

AYANEO loaded the NEXT II with premium controls that enthusiasts will genuinely appreciate. Hall effect sticks and triggers promise zero drift, dual-stage trigger locks switch between smooth analog and clicky digital modes, and rear buttons plus dual touchpads give you more inputs than a standard controller. A magnetic haptic motor adds feedback that tries to mimic console vibration, and the AYASpace software hides Windows behind a console-style launcher with performance tuning options built in.

The AYANEO NEXT II essentially stops pretending to be portable. It won’t fit in a jacket pocket, might get flagged at airport security, and is almost certainly too heavy for comfortable one-handed play in bed. But if you want something that feels more like a small gaming monitor with built-in controls rather than a device you’d actually carry around town, this oversized approach makes a strange kind of sense. You just have to accept that portability took a back seat to screen size and battery capacity.

The post AYANEO Just Built a 115Wh Strix Halo Handheld and Killed Portability first appeared on Yanko Design.

I Stopped Paying for Cloud Storage After Trying This Tiny 256GB iPhone SSD

Posted on by

I remember a time when smartphones had expandable storage. In fact, I remember feeling this internal rage when I saw the iPhone Air and that Apple even decided that a physical SIM slot wasn’t necessary anymore, because apparently a SIM tray blocks so much space that you need to shave down on a phone’s battery capacity. It’s wild that we’ve gotten to this point in our lives, and what’s more wild is that we now have to ‘rent’ storage out by paying for iCloud or Google Drive subscriptions to store our photos and videos. I remember when you could pop in a MicroSD card and those low-storage problems would go away… and ADAM Elements is trying to bring back that convenience with its ultra-tiny SSDs.

The iKlips S isn’t as small as a MicroSD, but it’s sufficiently more advanced than one. Barely the size of a 4-stud LEGO brick, this SSD plugs right into your smartphone, giving it an instant 256GB memory boost. It docks in your phone’s USB-C port, transferring data at incredible speeds, and here’s the best part – the tiny device packs biometric scanning too, which means you can pretty much secure your backups with a fingerprint the way you secure your phone with FaceID. The best part? No pesky subscription fees. You pay once and own the storage forever, and everything’s local and offline… so you never need to worry about remembering passwords, or about having companies and LLMs spy on your personal data to train themselves.

Designer: ADAM Elements

Click Here to Buy Now: $62.3 $89 (30% off, use coupon code “30YANKOIKPS”). Hurry, deal ends in 48-hours!

Think a thumb drive, but insanely tinier. That’s the beauty of SSDs, and ADAM Elements touts that the iKlips S currently holds the record for the world’s smallest SSD. Plug it into your phone, tablet, laptop, or any device and it instantly gets a 258GB bump. Data transfers at speeds of up to 400Mb/s with read speeds of 450Mb/s, that’s fast enough to move RAW files in milliseconds and entire 4K videos in seconds, or even directly preview/edit ProRes content on your phone, tablet, or laptop without having to transfer data to local storage. After all, that’s the dream, right?

The tiny device comes with a machined aluminum body and a lanyard hole so that you can string something through to prevent it from getting lost. Plug it into your phone to back up media, then into your laptop or iPad to edit said media. You can transfer data between multiple devices fairly quickly, across platforms too, thanks to cross-compatibility with iOS, Android, MacOS, Windows, ChromeOS, and even Linux. The tiny design sits practically flush against your phone, tablet, or laptop, occupying about the same amount of space as a USB receiver for a wireless keyboard or wireless mouse. Its most important design detail, however, hides in plain sight.

On the underside of the iKlips S is a fingerprint scanner, allowing you to add authentication to your SSD the way you add a password to your iCloud. The device can hold as many as 20 fingerprints, making it perfect for redundancies (just in case you cut a finger while chopping veggies) or even for a team of multiple people sharing data. Place your finger on the iKlips S and it unlocks the SSD, allowing you to read/write data in no time. You’re never faced with forgetting your iCloud password as your password literally lives on your fingertips.

The price of it all? A mere $62.3, which costs about as much as an annual subscription to these cloud storage services. For that, you get something you truly own, and can use without needing an app or an internet connection. Just plug it in and you’ve suddenly got extra storage. Secure the storage with a fingerprint, and move data around at speeds your internet service provider could only dream of. Neat, huh?

Click Here to Buy Now: $62.3 $89 (30% off, use coupon code “30YANKOIKPS”). Hurry, deal ends in 48-hours!

The post I Stopped Paying for Cloud Storage After Trying This Tiny 256GB iPhone SSD first appeared on Yanko Design.

Top 5 EDC Pocket Knives Running Major Last-Minute Discounts

Posted on by

The annual flood of Black Friday deals can feel overwhelming, a constant barrage of alerts and ads all claiming to offer the deal of a lifetime. For those of us who appreciate well-designed gear, the challenge isn’t just finding something cheap; it’s finding something great at a price that makes it impossible to ignore. A good everyday carry knife, in particular, is an investment in utility and reliability. This is the time of year when that investment pays off before you even make the purchase, with respected brands and proven designs becoming more accessible than ever.

Consider this your curated shortlist, a direct path to the best value in the EDC knife world right now. We’ve cut through the noise to bring you five standout blades that are currently seeing major price drops, from compact workhorses to unique tactical designs. Each one was chosen based on its reputation, build quality, and a discount that truly matters. This is your chance to acquire a fantastic tool that punches well above its weight class for a fraction of its usual cost.

Tekto A5 Spry (20% Off)

Out-the-front automatics occupy a special place in the knife world, somewhere between practical tool and mechanical indulgence. The Tekto A5 Spry lands firmly in both camps. This is an OTF with a 3.5-inch S35VN blade, titanium-coated and available in three distinct profiles: drop point for general use, dagger for piercing and double-edged utility, and tanto for maximum tip strength. That blade choice matters because each geometry fundamentally changes how the knife performs. The drop point excels at everyday slicing, the dagger offers symmetrical cutting edges and a needle-sharp tip, while the tanto brings reinforced strength for tougher tasks. All three options run 60-62 HRC hardness, putting this steel in premium territory where edge retention meets reasonable sharpening requirements. The 6061-T6 aluminum handle is contoured and textured aggressively, offering what Tekto calls an “iron grip,” and they’re not exaggerating. At 8.6 inches open and 3.49 ounces, this knife has presence without crossing into heavy.

The double-action mechanism fires with the kind of authority that makes cheap OTFs feel like toys. The button sits perfectly positioned for thumb deployment, and the blade launches with zero hesitation. Retraction is equally satisfying, a smooth return that locks back into the handle without play or wiggle. Tekto offers the A5 Spry in black or OD green aluminum, giving you color options to match either stealth or tactical aesthetics. The glass breaker on the pommel isn’t decorative, it’s a legitimate emergency tool that adds function beyond cutting. The ambidextrous pocket clip works for tip-down carry, and the lanyard hole gives you attachment options if you prefer alternate carry methods. This is an American-made OTF priced to compete with imports, which is rare enough to be notable. The build quality reflects domestic manufacturing standards, with tight tolerances and finish work that justifies the premium over budget alternatives.

Why We Recommend It

At 20% off (bringing it to $200 from $249.99), the A5 Spry becomes one of the best values in American-made OTF knives. S35VN steel at this price point is already competitive, but pairing it with three blade options and two color choices means you’re buying exactly the knife you want rather than settling for what’s available. The customization factor alone makes this compelling: drop point for EDC versatility, dagger for collectors who appreciate double-edged designs, or tanto for anyone who prioritizes tip strength. OTF automatics typically command premiums, and finding one with premium steel, solid construction, and genuine versatility under two hundred dollars is legitimately rare. This is the knife for anyone who’s wanted a quality OTF but balked at the typical $300-plus entry point.

Click Here to Buy Now: $200 $249 (20% off, use coupon code “YANKO” at checkout for $49.99 off, plus 2-day FedEx shipping. Hurry, deal ends in 48-hours!

SOG Keytron (26% Off)

Most people never think about knife accessibility until they’re standing in a parking lot with a package that needs opening and their EDC folder is sitting on their dresser at home. The SOG Keytron exists specifically for that moment. This is a 1.8-inch clip point blade made from stainless steel with a hardness of 54-58 RC, mounted on a slim aluminum handle that stretches to 5.3 inches closed. At 1.3 ounces, it weighs less than most sets of car keys and takes up about as much space. The lockback mechanism keeps the blade secure during use, releasing with a simple press of the spine lock. SOG added a thumb groove for opening, which works well enough once you get the hang of it, though this isn’t a flipper or assisted opener. Deployment is deliberate, not fast, which makes sense for something designed to live on your keychain. The satin finish on the blade is functional rather than flashy, and the flat grind gives you enough cutting edge for everyday tasks.

The built-in bottle opener is the kind of feature that sounds gimmicky until you actually need it, then it becomes the reason you keep this knife around. The keyring attachment uses a simple latch mechanism, making it easy to add or remove from your key collection without disassembling anything. The aluminum handle keeps weight down while providing enough rigidity to handle light cutting without flexing. This isn’t the knife you reach for when serious work needs doing, but it’s the knife that’s always there when you need to open a package, cut some cord, or pop the top off a bottle. The clip point blade shape gives you a fine tip for detail work while maintaining enough belly for slicing. SOG designed this for people who want a knife available at all times without the bulk or weight of traditional EDC folders. It’s the backup to your backup, the blade you forget you’re carrying until you suddenly need it.

Why We Recommend It

At $19.96 (down 26% from $27), the Keytron costs less than most people spend on a single lunch and solves a problem most knife people don’t think about: what do you carry when carrying a real knife isn’t practical? The built-in bottle opener and keyring attachment turn this from a simple blade into a multi-function tool that actually fits on a keychain without destroying your pockets. The aluminum construction and sub-2-inch blade mean it’s legal almost everywhere and inconspicuous enough to carry in settings where larger knives would draw attention. This is the knife for gym bags, travel kits, office drawers, or anywhere you want cutting capability without commitment. At under twenty bucks, it’s cheap enough to buy multiples and stash them everywhere you might need one.

Click Here to Buy Now

Gerber Gear Quadrant (47% Off)

Gentleman’s folders exist in a strange intersection between knife and accessory, where aesthetics matter as much as edge geometry. The Gerber Quadrant understands this assignment perfectly. The 2.7-inch sheepsfoot blade is made from 7Cr17MoV stainless steel, a budget-friendly Chinese steel that sharpens easily and holds an edge well enough for daily cutting without requiring constant maintenance. That sheepsfoot profile is the defining characteristic here, a straight cutting edge with a curved spine that eliminates the pointy tip most knives sport. This makes it less aggressive, more workplace-friendly, and surprisingly effective for precise slicing tasks where you’d normally reach for a box cutter. The frame lock is textured stainless steel, providing structural rigidity while the flipper deployment snaps open with satisfying authority. At around 3 ounces, this knife has enough heft to feel substantial without weighing down your pocket.

The handle is where things get interesting. Gerber offers three scale options: white G-10 composite, natural bamboo, and black bamboo. The bamboo variants turn this knife into a genuine conversation starter, bringing organic warmth to a category typically dominated by synthetic materials and anodized metals. The bamboo isn’t just for looks, it provides natural texture and grip while keeping weight minimal. The white G-10 option appeals to anyone who wants a cleaner, more modern aesthetic without sacrificing durability. The deep-carry pocket clip keeps the knife discreet, sitting low enough that most people won’t notice you’re carrying unless they’re specifically looking. The overall package feels refined in a way that makes it appropriate for office environments, social settings, or anywhere a tactical folder would seem out of place. This is the knife you carry to meetings, dinners, or events where pulling out something aggressively tactical would raise eyebrows.

Why We Recommend It

At $25.10 (slashed 47% from $47), the Quadrant becomes one of the best gentleman’s folder deals you’ll find anywhere. That bamboo handle option at this price is borderline absurd, it’s a material upgrade that typically adds significant cost but here comes in under twenty-six dollars. The sheepsfoot blade makes this genuinely useful in situations where pointed tips feel unnecessary or inappropriate, and the flipper action provides quick deployment without screaming “tactical knife.” Gerber designed this for people who want something classy that still performs, and the discount turns an already reasonable $47 into an impulse buy that makes sense for anyone needing a sophisticated EDC option. This is style meeting substance at a price that removes any reason to hesitate.

Click Here to Buy Now

CRKT Daktyl (23% Off)

Some knives whisper. The Daktyl screams from across the room. Tom Hitchcock designed this thing to look like it escaped from a sci-fi prop department, and he succeeded completely. The entire knife is cut from stainless steel, both blade and handle, creating a skeletal framework that’s equal parts functional tool and conversation starter. That massive finger ring isn’t just for show, it’s the core of the “Hole In One” deployment system that lets you rotate the 3.05-inch modified Wharncliffe blade open with a flick of your finger. The 420J2 stainless steel blade is skeletonized with oval cutouts that reduce weight and add visual drama, while the slide lock mechanism keeps everything secure once deployed. At 6.813 inches open and weighing just 2.4 ounces, this is lightness taken to its logical extreme.

The handle is where things get interesting, and by interesting, we mean polarizing. Those flowing curves and cutouts look fantastic in photos, but they’re designed around that finger ring more than traditional grip ergonomics. The bead-blasted finish is grippy enough, and there’s a carabiner built into the pivot end that doubles as a bottle opener, because why not add party tricks to your EDC? The deep-carry pocket clip works for left or right-hand carry, and the whole package feels more like jewelry than a tool, which is either the point or the problem depending on your perspective. This isn’t the knife you grab for heavy cutting tasks or extended use. It’s the knife you carry when you want something that looks like nothing else in anyone’s pocket, a blade that values aesthetics and novelty as much as it does utility. The Wharncliffe profile is excellent for precision work and slicing, but that handle design means your grip options are limited by the architecture of the frame itself.

Why We Recommend It

The Daktyl at $45.99 (down from $60) is twenty-three percent off a knife that you either instantly love or completely don’t get, and that’s precisely why it belongs on this list. This is design as statement, a knife that refuses to blend into the background of standard folders and liner locks. That stainless steel skeleton construction and finger ring deployment make it instantly recognizable, and the built-in bottle opener means it’s actually useful at parties where knives normally aren’t. At under fifty bucks, you’re buying into something genuinely different without the usual premium that “unique” commands. It’s not the most ergonomic knife you’ll ever hold, but it might be the most interesting, and sometimes that counts for more than another perfectly competent but forgettable folder.

Click Here to Buy Now

Smith & Wesson Extreme Ops (31% Off)

Budget knives have a certain reputation, and the Extreme Ops leans into it completely. This is a knife designed to hit a price point first and ask questions later. The 3.1-inch clip point blade is made from 7Cr17MoV stainless steel, a perfectly serviceable Chinese steel that holds an edge well enough for everyday tasks without requiring expert sharpening skills. The partially serrated configuration gives you options: plain edge for clean cuts, serrations for rope and tougher materials. The black aluminum handle is lightweight and functional, adorned with jimping on both the spine and handle for grip. At 7.1 inches overall and weighing 3.5 ounces, this is a knife that announces its tactical aspirations loudly, with ambidextrous thumb studs, an index flipper, and aggressive styling that screams “I’m ready for anything” even if that anything is usually opening Amazon boxes.

The liner lock is straightforward and reliable, exactly what you’d expect from a workhorse folder at this price tier. The pocket clip allows for ambidextrous carry, and the whole package feels solid enough for regular use without the anxiety that comes with carrying something expensive. Smith & Wesson’s knife division isn’t trying to compete with high-end custom makers; they’re building tools for people who need something functional, affordable, and backed by a recognizable name. The Extreme Ops delivers on that promise without pretense. It won’t impress knife snobs, but it also won’t leave you stranded when you need to cut something. The partially serrated edge is genuinely useful for anyone who regularly deals with zip ties, packaging straps, or fibrous materials, and the aggressive jimping means your grip stays secure even when things get slippery.

Why We Recommend It

At $17.33 (down 31% from $24.99), the Extreme Ops costs less than most people spend on lunch and delivers a fully functional EDC knife with a lifetime warranty. This is the knife you throw in a tackle box, glove compartment, or work bag without worrying about it. The 7Cr17MoV steel won’t win awards, but it’s tough enough and sharpens easily when it dulls. The partially serrated blade makes it more versatile than single-edge alternatives, and the aluminum handle keeps weight down while providing decent durability. This is maximum utility for minimum investment, a knife that understands its place in the world and excels at being exactly that. At under eighteen bucks, it’s an impulse buy that actually makes sense.

Click Here to Buy Now

The post Top 5 EDC Pocket Knives Running Major Last-Minute Discounts first appeared on Yanko Design.

This Shape-Shifting Bed Care Device Uses Airbags to Protect Patients Around the Clock

Posted on by

For elderly individuals or patients confined to bed for extended periods, whether due to surgery, chronic illness, immobility, or long-term care, pressure ulcers are among the most serious and persistent complications. Also known as bedsores, these injuries develop when constant pressure restricts blood flow to vulnerable areas of the body, particularly the back, hips, and buttocks. Over time, the skin and underlying tissue break down, leading not only to pain and infection but also to a significant decline in overall quality of life. Traditional care relies heavily on manual repositioning by caregivers, which can be physically demanding, inconsistent, and sometimes insufficient in fully preventing tissue damage.

Flipcare emerges as a transformative solution to this longstanding medical challenge. Designed with both patients and caregivers in mind, Flipcare integrates smart engineering, ergonomic support, and automation into a single, seamless care system. At its core, the device is built around a network of adjustable airbags strategically positioned to minimize prolonged pressure on any one part of the body. These airbags expand and deflate in timed intervals, gently shifting the user’s weight and redistributing pressure without causing discomfort or disturbing rest. This dynamic support system mimics the natural micro-movements healthy individuals make during sleep, movements that bedridden patients may no longer be able to perform on their own.

Designer: suosi design, Boyuan Pan, and Jianshen Yuan

Complementing the airbag system is Flipcare’s ergonomic back support design, crafted to follow the natural contours of the spine. Instead of forcing the user into a flat or rigid posture, the structure provides stable yet adaptive lumbar support that aligns with the body’s natural curvature. This not only enhances comfort but also reduces the risk of musculoskeletal strain, targeting one of the lesser-discussed but equally important consequences of long-term bed rest.

The hallmark of the device is its automated turning function, a clinically proven method for preventing pressure ulcers. Flipcare periodically shifts the patient from side to side using controlled, gentle rotations. These movements are precise and consistent, providing a level of care difficult to replicate manually over long hours. By automating this process, caregivers are relieved of repetitive physical labor, enabling them to focus on other essential tasks while ensuring that the patient receives uninterrupted pressure redistribution throughout the day and night.

What sets Flipcare apart is not just its technology but its human-centric approach. Every feature aims to enhance the patient’s dignity, comfort, and autonomy, while also reducing caregiver burden. With more consistent pressure management, patients experience improved skin health, better sleep, and reduced pain, critical factors that collectively elevate their overall well-being.

As the demand for long-term care rises and populations continue to age, Flipcare stands as a vital advancement in patient support. By merging intelligent design with compassionate engineering, it offers a safer, more comfortable, and more dignified care experience for those who need it most.

The post This Shape-Shifting Bed Care Device Uses Airbags to Protect Patients Around the Clock first appeared on Yanko Design.

Custom Modded iMac G3 Has An M4 Chip And Runs Cyberpunk 2077 At 30 FPS

Posted on by

Remember the Apple iMac G3? Those translucent, candy-colored bubble machines were everywhere in the late 90s and early 2000s. Steve Jobs and Jony Ive turned computing into something you’d actually want on your desk, and suddenly schools, offices, and homes were full of these things. For a lot of people, this was their first real computer.

But try using one today and you’ll understand why they’re mostly decorative now. The CRT screen hurts to look at, the processor moves like molasses, and those integrated speakers that seemed so premium back then sound absolutely terrible. That’s what makes Zac Builds’ recent project worth paying attention to. He took an iMac G3 shell and rebuilt it with current hardware, keeping everything that made the original iconic while fixing everything that makes it painful to actually use.

Designer: Zac Builds

The teardown shows just how strange these computers were. Apple used pressed-form RF shielding that looked genuinely sculptural, completely functional but designed to look cool even though nobody would ever see it. Then there’s the CRT, which can store lethal amounts of energy months after you unplug it. After carefully discharging the tube and pulling out all the original components, Zac had that famous shell and a whole lot of empty space to work with.

Removing everything created a structural problem. The case was basically held together with clips, so Zac 3D-scanned all the remaining parts to create precise digital models. He designed custom posts to properly connect the top and bottom halves, plus replacement clips where the old plastic had crumbled. He even tracked down the right 3D printing filament to match Apple’s original translucent plastic, testing physical color swatches until he found Bambu’s transparent PETG.

The core of the build is an M4 Mac Mini. Apple’s M-series chips have turned out to be legitimately good. They’re efficient, compact, and powerful enough for serious work without turning into space heaters. The base $599 model delivers solid performance, though Apple still charges obscene amounts for storage upgrades.

Zac addressed storage with three different solutions. First, he upgraded the internal NVMe drive. The Mac Mini’s storage isn’t soldered, which is unusual for Apple, though it uses a proprietary format and requires another Mac to restore the system via DFU mode. Apple’s documentation even gets it wrong, saying not to use a Thunderbolt cable when that’s actually what makes it work. Second, he added a UGREEN hub that plugs into the Mac Mini and has its own NVMe slot underneath, adding 2TB in about 15 seconds. Third, he connected a UGREEN NAS for bulk storage, supporting up to 60TB without subscription fees.

The display replacement required some creative problem-solving. Finding a modern screen that fits the G3’s curved opening while maintaining that retro 4:3 aspect ratio is basically impossible. Zac went with a 14-inch 4K OLED at 16:10, then designed a custom interposer frame to bridge the gap between the flat screen and the curved case. Getting that transparent frame to look right meant using CA glue without accelerator spray, which takes 8+ hours to cure but avoids the foamy expansion you’d see through clear plastic.

The audio system got a proper upgrade too. Zac installed Dayton Audio 1.5-inch full-range drivers in custom 3D-printed enclosures designed for optimal acoustic volume. A 200-watt digital amp boosts the signal from the Mac Mini’s headphone jack, and after some tweaking, the whole setup works like it’s factory-integrated and responds to software volume controls.

The power system is genuinely clever. Zac rewired the original power cord to feed automotive-grade junction terminals that distribute 120V AC to everything inside: the Mac Mini, the screen’s power supply, the amp’s transformer, and anything else that needs power. It’s live electricity, so there’s real risk if you’re careless, but the modular approach means one cord powers everything.

The IO panel mirrors the original’s placement while offering Thunderbolt, USB-C, dual USB-A, and Ethernet, all connected back to the Mac Mini through short cable extensions. Even the original power button works, thanks to some microscope-assisted soldering that extended the Mac Mini’s switch contacts to reach the front of the case.

The rebuilt machine runs Cyberpunk 2077 and handles 6K video editing smoothly. The upgraded internal drive shows 50% speed improvements, while the external NVMe delivers nearly 1GB/s transfers. Both options cost significantly less than Apple’s storage pricing.

Could you just buy a MacBook instead? Sure, and you’d get more portability. But you’d also pay nearly three times as much for comparable storage, and you’d miss the entire point. This project isn’t about building the most practical computer – it’s about preserving a design icon while making it genuinely usable. Like restoring a classic car, you’re trading pure practicality for the joy of bringing something meaningful back to life. Zac’s rebuilt iMac G3 delivers that early-2000s nostalgia without the painful slowness, eye-straining display, or terrible speakers, proving that sometimes the best way forward is to bring the past along with you.

The post Custom Modded iMac G3 Has An M4 Chip And Runs Cyberpunk 2077 At 30 FPS first appeared on Yanko Design.

This Stretching Device Pays You Real Rewards to Fix Your Posture

Posted on by

You know that feeling when you’ve been hunched over your laptop for three hours straight and your shoulders are basically living rent-free up by your ears? That tightness in your neck that no amount of rolling your head around seems to fix? Yeah, we all do. The modern office worker’s body is basically staging a protest, and honestly, it has every right to. Enter Break, a wellness device that’s part fitness tracker, part game controller, and part intervention for your increasingly sedentary existence. Designed by Jeoung Jinyoung, Lee Jonghyun, Yang Junhong, and Lee Junyoung, this Red Dot award-winning concept tackles the desk job health crisis with a surprisingly playful approach.

The device itself looks like nothing you’ve seen before. It has this curved, almost sculptural form with a wire connecting two handle-like pieces. Think of it as a resistance band met a piece of modern art and they decided to help you fix your posture. The sleek design in soft blue and coral feels refreshingly un-intimidating, which is kind of the point. This isn’t gym equipment that’ll gather dust in your closet while silently judging you. It’s meant to be portable, accessible, and actually used.

Designers: Jeoung Jinyoung, Lee Jonghyun, Yang Junhong, Lee Junyoung

Here’s where it gets interesting. Break doesn’t just sit there looking pretty. It actively encourages you to do specific stretches that target the exact problems desk workers face. Those rounded shoulders from hovering over your keyboard? The dreaded text neck from staring at your phone? The device prompts you with what it calls “quests” for exercises like Y/T/A raises, delivered right on its built-in screen. You’re basically doing physical therapy, but the gamification makes it feel less like a chore and more like, well, a game.

The wire structure facilitates these movements, giving you the resistance you need to actually work those neglected muscle groups. You hold the handles, stretch in different positions, and the device tracks your progress. It’s simple enough that you don’t need a YouTube tutorial to figure it out, but effective enough that you’ll actually feel the difference.

But Break goes beyond just being a stretching tool. It’s also monitoring your vitals with built-in sensors. Heart rate, oxygen saturation, calories burned, the whole package. This data gets sent to the accompanying app, which transforms your phone into your wellness command center. The more you use Break, the more detailed health information you receive, creating this feedback loop that actually motivates you to keep going.

And here’s the kicker that makes this concept particularly clever: those virtual rewards you earn from completing physical quests? They’re not just digital badges collecting virtual dust. You can exchange them for actual goods or services from real merchants. Suddenly, taking a break from your spreadsheet to do some shoulder stretches isn’t just good for your health, it’s also getting you closer to that coffee you’ve been craving or whatever else the reward system offers. The genius of Break lies in understanding that knowing you should exercise isn’t enough. We all know sitting is the new smoking. We’re all aware our posture is terrible. But awareness doesn’t create change. What does? Making it easy, making it fun, and giving tangible rewards. Break tackles all three.

The design team behind this clearly understands that modern wellness solutions can’t just lecture people into being healthy. They need to meet users where they are, which is usually at a desk, probably tired, definitely stressed, and not particularly motivated to add one more thing to their to-do list. By integrating seamlessly into the workday, requiring minimal time investment, and gamifying the experience, Break removes most of the barriers that keep office workers chained to their chairs.

Is Break going to replace your gym membership? Probably not. But it might be the thing that gets you moving when you otherwise wouldn’t. It might be the intervention your shoulders have been begging for. And in a world where we’re all increasingly aware of the toll our digital lives take on our physical bodies, having a beautifully designed tool that makes wellness feel achievable is pretty refreshing.

The post This Stretching Device Pays You Real Rewards to Fix Your Posture first appeared on Yanko Design.

5 KeyShot Renders With Lighting So Perfect, You Wish They Were Real Products

Posted on by

There’s something magical about watching a design concept come to life before it ever physically exists. That’s the power of KeyShot Studio, the rendering software that lets designers test their wildest ideas, play with materials and lighting, and present their visions with stunning photorealistic clarity. For those of us who obsess over beautiful objects and dream about perfectly curated spaces, KeyShot renders are like candy for the eyes: they show us what could be, all wrapped up in gorgeous visuals that make us think, “I need that in my life right now.”

This collection of KeyShot-rendered concepts proves that the best designs don’t just look good; they solve real problems with style and wit. From furniture that fits in a suitcase to clocks that respect your rental deposit, these five concepts showcase how designers are reimagining everyday objects through a minimalist lens. Each piece started as an idea, was meticulously crafted in KeyShot, and emerged as something we’re genuinely excited about. Whether you’re a design collector, a function-obsessed minimalist, or someone who just appreciates when smart meets beautiful, these concepts will make you fall in love with the art of possibility.

Create your own Aesthetic Render: Download KeyShot Studio Right Now!

1. Carousel Chair by Alessandro Pagura

When I see that a piece of furniture needs to be assembled if I buy it, I immediately back away because I am not the brightest when it comes to following instructions and using various tools. But if the promise is that it’s as easy as building a Lego set (which isn’t always that easy TBF), I might reconsider. The Carousel Chair concept by Alessandro Pagura promises that all you need is an Allen key to set it up and that it’s actually pretty accessible.

The pieces are made from standard plywood and off-the-shelf hardware, and once put together, you get a simple and minimalist chair with clean, rounded lines and a distinctive segmented backrest. The curved seat design is probably meant to make your tush a bit more comfortable even when sitting on it for a long time. This isn’t just eye candy for your space but ingeniously practical. The entire chair breaks down and tucks neatly into a suitcase, requiring only an Allen key for assembly. No complex instructions, no specialized tools, no stress. It also brings the spirit of DIY accessibility, democratizing furniture design and making it more open and shareable through open-source CNC plans.

2. Wall Clock by Marc Senar

Say goodbye to wall damage and hello to effortless style with this genius suction-mounted wall clock concept. Crafted from smooth, durable plastic with an organic, pebble-inspired silhouette, this timepiece is a renter’s dream and a perfectionist’s best friend. No screws, no drill holes, no dust clouds, and definitely no noise: just peel, press, and you’re done. The innovative suction system adheres securely to any smooth surface, making it perfect for bathroom tiles, kitchen backsplashes, or glossy bedroom walls where you’d never dare break out the power tools.

Envisioned in soft, sophisticated colorways including crisp white and warm amber orange, this concept clock brings a playful yet refined touch to any space. The clean face features easy-to-read numerals with contrasting hands (love that pop of orange!), while the gently curved form adds sculptural interest without overwhelming your aesthetic. Whether you’re decorating a rental apartment, refreshing a spa-like bathroom, or simply avoiding another DIY disaster, this design concept shows how functional pieces can respect both your walls and your sanity. Time-telling has never looked this stress-free.

3. RW Tea Candle by Design in Depth

Roll the dice on ambiance with this clever candle holder concept that takes the gamble out of mood lighting. Inspired by the iconic shape of a gaming die, this sleek metallic cube features the classic dot pattern on its sides while the top surface holds three tea light candles in perfectly positioned wells. Crafted with a sophisticated matte finish, it’s a playful nod to chance and risk, but the only thing you’re betting on here is creating the perfect cozy atmosphere. No odds, no stakes, just pure flickering flame and conversation-starting style.

This design concept transforms an everyday object into sculptural art that’s equal parts functional and fun. The geometric precision and minimalist aesthetic make it a stunning centerpiece for modern interiors, while the cheeky dice reference adds personality and edge. Imagine it gracing your coffee table during game night, adding drama to a bookshelf display, or bringing unexpected whimsy to a sophisticated dinner setting. For collectors who appreciate design with a sense of humor and anyone who loves when form meets witty function, this dice candle holder concept proves that the best designs know how to play.

4. Ennea Light by Have Not

The Ennea Light concept reimagines illumination as pure geometry, where nine perfectly arranged spheres create a mesmerizing grid of light and shadow. Supported by sleek chrome legs that give it an almost whimsical stance, this sculptural lamp is designed to be as versatile as it is beautiful. The genius lies in its dual personality: face it toward a wall and it becomes soft ambient lighting that bathes your space in a dreamy glow, or turn it forward to showcase those glowing orbs as a statement art piece. Available in glossy black, pure white, or luminous configurations, each sphere works in harmony to create depth and visual rhythm that feels both futuristic and timeless.

This design concept embodies minimalist philosophy through mathematical precision and balance. The name “Ennea” (Greek for nine) celebrates the power of repetition and order, where individual points of light unite into a cohesive plane that feels greater than the sum of its parts. Perfect for design collectors who appreciate the intersection of form and function, or anyone drawn to pieces that transform a room’s entire atmosphere. Whether perched on a sideboard, bedroom shelf, or modern console, the Ennea Light concept proves that sometimes the most captivating designs are built on the simplest foundations: perfect spheres, precise spacing, and the magic of light.

5. SETTIME by Design Woork

This SETTIME concept reimagines how we experience the passing of time through ultra-minimalist design that’s more art object than alarm clock. With its sleek circular profile and impossibly thin silhouette, this timer device distills functionality down to its purest essence. The face features a clean, uncluttered surface with subtle controls tucked discreetly along the side, while the overall form takes inspiration from a perfectly balanced water droplet. Available in sophisticated monochrome options of deep black or crisp white, the concept comes in packaging as elegant as the product itself, with a beautifully simple line drawing that captures the device’s graceful proportions.

Designed for those who appreciate when technology knows how to disappear into the background, this SETTIME concept would be equally at home on a minimalist desk, modern kitchen counter, or serene bedroom nightstand. The ultra-slim profile means it takes up virtually no space while making maximum visual impact, proving that timekeeping devices don’t need to shout to be noticed. For design collectors who value restraint and refinement, or anyone tired of cluttered, over-designed tech, this concept shows how beautiful simplicity can be when every element serves a purpose. Time, distilled to its most elegant form.

Create your own Aesthetic Render: Download KeyShot Studio Right Now!

The post 5 KeyShot Renders With Lighting So Perfect, You Wish They Were Real Products first appeared on Yanko Design.

This $368 Gadget Turns Any Bike Into an E-Bike in 30 Seconds (And It’s 28% Off This Weekend)

Posted on by

The whole appeal of LIVALL’s PikaBoost line is that it doesn’t look like a DIY experiment. The PikaBoost 2 Lite is a self-contained module that clamps to your seatpost and drives your rear tire with a roller, and it manages to do that while looking more like a piece of refined bike kit than a bolt-on science project. LIVALL released the Lite alongside the full PikaBoost 2 as the simpler, lower-power version: same core idea, same clean industrial design, but tuned for casual city rides rather than long-range commuting. It’s on sale for 21% off through December 1st, which puts it squarely in the Black Friday impulse-buy zone if you’ve been curious about trying electric assist without committing to a full e-bike.

What “Lite” means in practice is a set of sensible compromises that align perfectly with urban riding. The motor delivers up to 500W of peak power, enough to flatten hills without feeling like a rocket, and assists you up to a city-friendly 15 mph (25 km/h). The brains behind it is LIVALL’s patented AAR 2.0 adaptive algorithm, which intelligently matches the power output to your pedaling for a smooth, natural feel. LIVALL claims a maximum range of up to 31 miles (50 km), and an IPX5 waterproof rating means it’s built to handle road spray and unexpected showers. This isn’t a kit for extreme touring; it’s the convenient, quick-fit solution for riders who want a simple boost for their daily commute and the ability to turn any bike into an occasional e-bike.

Designer: LIVALL

Click Here to Buy Now: $368 $508 (PikaBoost 2 Lite Bundle with additional 220Wh battery) Use Code RKMASDSTJYYT for extra $20 off. Hurry, deal ends in 48-hours!

Click Here to Buy Now: $269 $339 (PikaBoost 2 Lite) Use Code ANBM9MC9Y5X8 for extra $10 off. Hurry, deal ends in 48-hours!

Amazon Here.

Streamlined eBike Conversion, Featuring Only the Essentials

What makes the Lite Edition interesting at this price point is that it preserves the “install in under a minute, move it between bikes, take it off when you don’t need it” convenience, but strips out the features most people won’t miss on short rides. It totally simplifies the e-bike experience: no remote controller, no app connection, just pure riding. Retaining only the essential Assist Mode, the powerful assist activates automatically when you pedal – zero setup, zero learning curve, just focus on the joy of powered cycling without any distractions. Lite Edition also retains the core safety features of the Powerful Edition, including slip detection, anti-slip V-shape tire, smart sensor, and LED rear light. It provides the confidence and peace of mind that make it an excellent choice even for novice riders or seniors.

Intelligent Engineering: Lightweight Design and Effortless Flexibility

Clamping a motor and battery to your seatpost sounds like it should make a bike feel clumsy and top-heavy, but the reality is often less dramatic than you’d think. By keeping the mass centered and relatively close to the rider’s own center of gravity, it avoids the weird, disconnected steering feel you can get from a heavy front hub motor. The entire experience is meant to be transient. You aren’t permanently marrying your frame to a motor; you’re just giving it a temporary partner for a specific journey. This is a fundamental departure from the mindset of hub or mid-drive conversions, which demand a commitment of both time and mechanical alteration to your bike. The PikaBoost 2 Lite asks for neither.

Perfect for Anyone Seeking Seamless Electric Assist

You can almost picture the ideal user. Maybe it’s someone with a Brompton and a third-floor walk-up, who needs an assist for the last mile but can’t add permanent weight to a bike they carry daily. Or it’s a couple who share a single assist unit between two different bikes for weekend errands. It even makes sense for the dedicated road cyclist who loves their lightweight frame but secretly wishes for a little help on the last 20 kilometers of a hilly century ride. These aren’t people looking to replace a car with a 50-kilometer-per-hour e-bike beast. They’re cyclists who just want to smooth out the rough edges of their existing rides, to arrive a little less sweaty, to make that final hill feel a little less daunting.

Honest Evaluation: Convenience Over Perfection

Of course, the friction-drive concept itself isn’t an outward replacement for dedicated e-bikes. It’s a modular solution that does the job well, but has some really minor trade-offs. The direct roller-on-tire interface is brilliantly simple, but it’s also inherently sensitive to conditions. Heavy rain can reduce its grip, and a worn or under-inflated tire can impact performance. There’s also a low but audible hum as the roller spins against the tread. These aren’t deal-breakers so much as they are the known physics of the design. You trade the silent, all-weather consistency of a hub motor for the unparalleled convenience of a system you can install or remove in the time it takes to fill a water bottle.

Unlock the Best Value in eBike Experience This Black Friday

That 28% discount on the Lite Edition Bundle for Black Friday really reframes the entire proposition. At full price, the PikaBoost 2 – Lite Edition is a considered purchase, an investment in convenience that you have to weigh against more powerful but more complex kits. With a significant price cut, it becomes something else: a low-risk experiment. It’s an opportunity to answer the question, “Would I actually use an e-bike?” without first spending a couple of thousand dollars on a dedicated machine. If you discover you love the assist and use it constantly, you’ve learned something valuable for your next big bike purchase. But if you find you only reach for it once or twice a month, then the Lite Edition, bought on sale, was probably the smartest, most cost-effective way to get that occasional electric tailwind all along.

Click Here to Buy Now: $368 $508 (PikaBoost 2 Lite Bundle with additional 220Wh battery) Use Code RKMASDSTJYYT for extra $20 off. Hurry, deal ends in 48-hours!

Click Here to Buy Now: $269 $339 (PikaBoost 2 Lite) Use Code ANBM9MC9Y5X8 for extra $10 off. Hurry, deal ends in 48-hours!

Amazon Here.

The post This $368 Gadget Turns Any Bike Into an E-Bike in 30 Seconds (And It’s 28% Off This Weekend) first appeared on Yanko Design.

Trace Line Clock Uses a Single Hand to Sketch Time as a Moving Line

Posted on by

Clocks are one of the oldest design playgrounds, and yet most of us still live with the same two-hand layout we grew up with. Designers keep trying to find new ways to visualize time, sometimes at the cost of instant readability. The Trace Line Clock is a small desk piece that connects hours and minutes with a single, constantly changing line, turning the familiar dial into something that feels a little more like a drawing.

The Trace Line Clock is a minimal, 3D-printed desk clock by Hye-jin Park that uses one continuous hand to show both hours and minutes. The inner end of the line rides an inner circle for the hour, while the outer end rides an outer circle for the minute. As time passes, the line’s angle and length shift, so every glance shows a new geometric relationship between the two.

Designer: Hye-jin Park

The physical form is a white, wedge-like block that leans back slightly, with a circular recess on the front. Two concentric tracks are cut into that circle, and a single colored line spans between them. There are no numerals, logos, or extra markings, just the circles and the hand. It reads more like a small piece of graphic sculpture than a typical clock, especially on a clean desk.

The inner tip of the line points to the hour on the inner track, while the outer tip points to the minute on the outer track. It’s not as instant as glancing at a bold wall clock, but it’s also not inscrutable. With a moment’s attention, you can read it reasonably well, and the payoff is that you also get a little geometric drawing that changes every minute instead of just numbers.

Because the minute end moves faster than the hour end, the line is always stretching, shrinking, and rotating. The clock doesn’t just tick; it sketches. Checking the time becomes a small moment of noticing how the hand has reconfigured itself, not just a quick number grab. It’s the kind of object that rewards a second look rather than a drive-by glance at your phone or wrist.

The clock hides a standard movement and two internal hands behind the face, using magnets to couple them to the visible line. The front stays clean and uninterrupted, with the hand floating in the recess. The choice of a single accent color for the line against the white body keeps the focus on the changing geometry, not on branding or ornament that would clutter the composition.

The Trace Line Clock is not the tool you buy if you need to read the time from across the room in half a second. It’s a small, thoughtful piece for a desk or shelf where you don’t mind spending an extra beat to parse it. In return, it turns time into a quiet, evolving graphic that feels more like a living diagram than a static display.

The post Trace Line Clock Uses a Single Hand to Sketch Time as a Moving Line first appeared on Yanko Design.

Come Together Adds Rolling Speaker and Mini Fridge to Your Couch

Posted on by

TVs keep getting brighter and sharper, but the viewing experience is still broken up by small, annoying tasks. Getting up for a drink, fiddling with lights, or pausing mid-scene to adjust the volume. These micro-interruptions chip away at immersion more than we admit. Come Together is a concept that tries to design around those gaps instead of just upgrading the panel, treating the home theater as a full ecosystem rather than a screen on a wall.

Come Together is a three-part home theater system made up of a Tower, a Base, and a Station. It’s meant to sit alongside a premium TV as an accessory, not replace it. The Tower handles drinks, lighting, and phone charging. The Base handles spatial sound and movement. The Station is a compact dock that cools, charges, and keeps everything ready for the next movie night.

Designer: Woojin Jang

Most of the time, the Tower sits as a calm black cylinder, but when needed, it rises up to reveal a mini fridge that can hold up to five cans. An optional tray on top can be swapped in for snacks. Adaptive mood lighting under the top disc syncs with what’s on screen, and the very top surface doubles as a Qi2 wireless charging pad for your phone, so it doesn’t die halfway through a marathon.

Instead of a static soundbar, the Base is a circular spatial sound unit with drivers arranged around its perimeter and a 3D ToF sensor for spatial awareness. It maps the room, figures out where you’re sitting, and quietly rolls itself to the best spot for audio. The drive system borrows from robot vacuums, but here the goal is better sound rather than clean floors or delivering drinks in an awkward dance.

The Station is a small, low-profile dock that the system returns to when it’s done. There, it recharges and cools the mini fridge for the next session. A simple display on top shows the time and the fridge temperature, giving you just enough information at a glance. The Station keeps the whole setup feeling like a single, coherent appliance rather than a pile of separate gadgets fighting for outlets and attention.

All three components share a cylindrical, black-glass aesthetic that feels more like high-end audio gear than robots. The Tower’s rising motion and glowing top give it a bit of theater without tipping into gimmick. The Base and Station stay visually quiet, so the TV remains the focal point while the system supports it in the background, both literally and in how it shapes the room.

Come Together shows how robotics might slip into home entertainment without feeling like sci-fi props. By bundling drinks, lighting, and spatial sound into a calm, coordinated system, it treats immersion as something you can design from end to end. For anyone who’s ever hit pause just to grab a drink, the idea of a home theater that comes to you is appealing.

The post Come Together Adds Rolling Speaker and Mini Fridge to Your Couch first appeared on Yanko Design.