Tag Archives: Wearables

Moto Watch 40 design straddles the line between smartwatch and fitness band

Posted on by

Smartwatches have more or less become a stable presence in today’s modern lifestyle to the point that no one will make fun of you anymore for wearing a screen on your wrist, except those coming lovers of classic mechanical watches. That said, not everyone is a fan of these hi-tech timepieces and would prefer something less distracting and more focused on just the health-tracking aspects. Dedicated fitness bands, however, often come in sporty and rugged designs, as if the only ones that would wear them are athletes or very active people who don’t mind strapping a rubber or silicone band on their wrists, even on formal occasions. That’s where the new Moto Watch 40 comes in, offering a wearable that almost looks like a stylish smartwatch but is a fitness band at heart.

Designer: CE Brands (Motorola licensee)

Although there was a bit of experimentation in the beginning, smartwatches today come in only two shapes: a square or a circle. Although circular smartwatches were touted to be classier or more stylish because of their resemblance to the majority of luxury timepieces, the Apple Watch has constantly made the case for equally elegant designs on square smartwatches. Unsurprisingly, there are some manufacturers that have even opted to walk the same path, producing smartwatches that, for better or worse, look like the Apple Watch.

The Moto Watch 40, however, is neither of those and is walking the fine line between smartwatch and smart band instead. It has a rectangular body, more common with fitness trackers, but the size of the device and its general appearance are more in line with smartwatches. It has a screen that curves at the edges, giving it a refined appearance compared to the rugged looks of common fitness trackers.

At the same time, however, its limited functionality leaves no doubt that it isn’t a smartwatch either. It has a variety of sensors for tracking activity, including blood oxygen levels and even sleep, but you won’t be seeing a lot of the advanced functions and options you’d find on a smartwatch. It supports only viewing notifications, so you’ll have to pull out your phone if you want to reply to messages or even take calls. Its 10-day battery life may sound a little disappointing, but the Moto Watch 40 compensates with an advertised charging speed of 25 minutes only.

That combination of essential functions and stylish design will set you back for only $64.99. It might sound like a tempting proposition, especially when other fitness bands are either too expensive or too informal. That said, even a wrist-worn device might still be too conspicuous for some people, and a smart ring that would let them wear their favorite mechanical watches could be the perfect compromise instead.

The post Moto Watch 40 design straddles the line between smartwatch and fitness band first appeared on Yanko Design.

Apple Vision Pro iFixit teardown reveals what’s inside and how it works

Posted on by

Apple has entered a new product category with the Vision Pro. The expensive eyewear, positioned to transport us into the future of VR, is an expensive deal to begin with at $3,499. So, ripping something of that value apart to just reveal how repairable it is and to what it packs within that makes it worthy of making Apple a new category giant may seem obnoxious to us.

But that’s little of a deterrent for the folks at iFixit, who pride in tearing down the latest gadgets to see how easy or difficult it is to repair them and examine what makes it a favorite. In that scheme of things, iFixit has put its heating guns and prying tools to use to tear open Apple’s new tech marvel. What they see is pretty straightforward: a few easy-to-remove parts and then complicated screws, connectors, and seals to get past before fully revealing the impressive cameras and more.

Designer: iFixit

Between the easy take offs and the intricate connectors, the Vision Pro – iFixit teardown reveals – has some unbelievable tech crammed. Some of this is never seen before, especially the advanced EyeSight display which it is discovered uses several videos of the wearer’s eyes simultaneously.

As the iFixit video runs through the teardown it shows Apple’s new AR/VR headset is similarly detailed and intriguing as the other Apple devices. So, the process of tearing it down is not easy and required a heat gun, screwdrivers, prying tools, and lots of effort. But as you’ll see, the effort is worth appreciating.

First up, the video suggests the customizable face cushion, light seals are easy to pull off, while the power chord has to be turned to unlock. The device’s knit band pops easily off the headgear stems, from the integrated latch. Stem with speakers disassemble the eye housing swiftly as well leaving the cameras, sensors, battery, R1 chip, and EyeSight display to take a look into.

This is according to iFixit the first scratch of the detailed teardown that would be revealed in the near future. The initial teardown however shows that the Vision Pro is inside out what we have heard of. It has some high-end tech within its small form factor, but it will require some elbow grease to repair.

The post Apple Vision Pro iFixit teardown reveals what’s inside and how it works first appeared on Yanko Design.

Galaxy Fit 3 leaked fitness tracker boasts an ultra-long battery life and advanced features

Posted on by

The recent leaks surrounding Samsung’s Galaxy Fit 3, especially those shared by Evan Blass and Ahmed Qwaider on social platforms, have shed light on the device’s design, features, and potential launch timeline. While speculation was rife about its introduction alongside the Galaxy S24, the consistent appearance of leaked images and specifications over the past months suggests an imminent unveiling.

Designer: Samsung

According to rumors, the Galaxy Fit 3 is expected to have a 1.61-inch display, which is 46% larger. It’s speculated to feature a bright OLED screen with a resolution of 256 x 402 and a pixel density of 302ppi. This marks a notable visual clarity and detail improvement, enhancing the user experience. The device’s build quality is also upgraded with an aluminum case, ensuring durability, an IP68 rating for dust and water resistance, and a lightweight silicon wristband at just 21.39g, combining comfort and resilience.

Battery life stands out as a key feature, with rumors pointing to an ultra-long battery life of up to 21 days on a single charge, surpassing the Galaxy Fit 2’s 15-day battery life and offering a significant advantage over the typical battery life of Samsung’s Wear OS-based Galaxy Watches. While the Galaxy Fit 3 may forego wireless charging, the extended battery life presents a compelling trade-off for users prioritizing longevity over convenience. A new and potentially significant feature being introduced on a Samsung fitness band for the first time is a blood oxygen level or SpO2 sensor.

The device is anticipated to come in three colors: Grey, Pink, Gold, and Silver, catering to diverse personal styles. It’s expected to be equipped with an array of sensors, including an accelerometer, gyro, and heart rate monitor, alongside sleep-tracking capabilities. The inclusion of GPS remains uncertain, leaving room for speculation about the device’s navigational features.

Pricing rumors suggest an attractive $80 price point, positioning the Galaxy Fit 3 as an accessible option for fitness enthusiasts seeking a blend of style, functionality, and endurance in their wearable devices. This combination of features and the device’s focus on health and fitness tracking solidifies the Galaxy Fit 3’s place within Samsung’s wearable lineup, offering a fresh alternative to the more comprehensive Galaxy Watch series and promising several advancements in design, display, and battery life.

Samsung fans and tech enthusiasts appear to be super hyped about the upcoming Galaxy Fit 3. It’s going to be the perfect fitness companion, packed with all the latest tech from Samsung and designed with fitness enthusiasts in mind. So stay tuned for more details!

The post Galaxy Fit 3 leaked fitness tracker boasts an ultra-long battery life and advanced features first appeared on Yanko Design.

Fossil will no longer make smartwatches, implies weak market for designer wearables

Posted on by

There was a time when smartwatches were seen as geeky trinkets that had no place on ordinary people’s wrists. It took the success of the Apple Watch and the collaboration of fashion brands to bring this piece of wearable technology to the masses. But while smartwatches have finally found their legs, that doesn’t necessarily mean that it has been a profitable business either. It seems that those brands that have made smartwatches literally fashionable are starting to reconsider their strategies, especially with only a few successful products that are unsurprisingly still dominated by consumer electronics companies. Fossil has apparently decided to just pull the plug and call it quits on the smartwatch market, preferring to focus its resources on the designer products that actually bring in the money.

Designer: Fossil (via The Verge)

When smartwatches first came to the market, it was smartphone manufacturers that took the lead. Compared to the selection we have today, it’s not surprising why most people shied away from having them on their wrists. They were large, clunky, and visually unappealing. And they required charging almost every night.

While the Apple Watch would always be an exception, it took negotiations with brands like Fossil, TAG Heuer, Mont Blanc, and Michael Kors, just to name a few, to really bring smartwatch designs to the same level as traditional timepieces, at least on the outside. To some extent, there was a successful push to turn these pieces of wearable technology into true fashion accessories and, given some of the prices, luxury items. Now smartwatches are more or less more common, but that doesn’t mean the market for the more fashionable smartwatches is actually growing. In fact, you could almost say that the top smartwatch vendors are Apple, Samsung, and Google on the higher end, and Xiaomi, Mobvoi, and smaller manufacturers on the opposite end.

Confirming rumors that were already going around the Internet, Fossil announced that it was exiting the smartwatch business. It was a “strategic decision” and would focus on the “core segments of our business that continue to provide strong growth,” namely traditional watches, jewelry, and leather goods. Reading between the lines, it means that its line of smartwatches isn’t providing that kind of growth and it doesn’t foresee that changing in the future.

This makes the Fossil Gen 6 that was launched in 2021 the last smartwatch the marque will ever make. Fossil does promise to continue supporting its existing smartwatches for the next few years, though it probably really means only one or two years moving forward. Fossil is the first brand to make this big announcement, but it probably won’t be the last as the designer smartwatch market continues to stagnate or even shrink, leaving smartphone manufacturers to take the helm once more.

The post Fossil will no longer make smartwatches, implies weak market for designer wearables first appeared on Yanko Design.

Visor mixed reality headset promises a more accessible Apple Vision Pro

Posted on by

Although it’s definitely the latecomer, Apple is unsurprisingly stirring up a storm with the launch of the Vision Pro. Mixed reality, or spatial computing as Apple named it, is en vogue once again, and many companies are making a lot of noise to demonstrate how they’ve been playing the game long before the Vision Pro was even announced. That boast comes with the implication that they can offer a better experience and a more accessible product, like this visor-like Visor headset that’s trying to be a better Vision Pro than the Vision Pro with a more open platform, a more stylish design, and most importantly, a more affordable price tag.

Designer: Immersed

Although the Apple Vision Pro is definitely more stylish than other mixed reality headsets, it’s still a headset that leaves nothing to the imagination about what you’re wearing or doing. Visor, on the other hand, looks more like its namesake, at least outwardly. Despite the spectacle-like design, it actually bears 4K micro OLED displays per eye, a lot more than what the Visor Pro boasts. And yet the headset itself manages to weigh only 200g, more than half what the Meta Quest 3 weighs. And yes, it has an external battery to help keep the weight down.

Beyond just the design of the device itself, the Visor offers a completely different experience from the likes of the Vision Pro or even the new Xreal Air 2 Ultra that was announced at CES 2024 earlier this month. It neither runs its own operating system nor does it just mirror the screen of a computer. Instead, it harnesses Immersed’s mixed reality software that it has been developing for years that practically gives you virtual monitors spread across your vision, resulting in a wider field of view compared to the common smart glasses implementation.

What this means in practice is that you can keep on using the software and operating system you’re already familiar with without any limitations. In fact, Immersed says it won’t even block attempts to make SteamVR work with its device, even though its focus is more towards productivity and professional use. Visor doesn’t even have an app marketplace, but it will release development tools for sideloading apps later on.

If Visor’s $399.99 price tag sounds too good to be true, that’s because it somewhat is. That cheap figure actually requires you to also buy a “Membership Plus” subscription that will cost $59.99 a month for 12 months or $39.99 for 24 months. The good news is that you won’t lose access to the basic features of the device if you decide not to renew after that period. Alternatively, you can buy the device alone for a full $999.99, without any of the extras, which is still a lot cheaper than the Apple Vision Pro. Whether it can deliver all these promises, however, is something we’ll have to see in due time, no pun intended.

The post Visor mixed reality headset promises a more accessible Apple Vision Pro first appeared on Yanko Design.

Samsung Galaxy Watch non-invasive glucose monitor will be a live-saving game-changer

Posted on by

While there seems to be a rising interest in smart rings as condensed fitness monitors, smartwatches are hardly done growing. Smart rings, at least in their current incarnation, promise a discreet way to keep track of your body’s state, but smartwatches have more room for more advanced sensors and features that you can never fit inside a ring. Some of those features might even make the difference between life and death, as proven time and again by Apple Watch anecdotes. Samsung, however, is setting its sights on a more ambitious goal that’s considered to be one of the Holy Grails of home healthcare. In the near future, its Galaxy Watch line could tell the wearer if their blood sugar is dangerously low or high, all without having to prick their skin and draw blood.

Designer: Samsung (via Bloomberg)

Next to heart-related disorders, diabetes is considered to be one of the most serious diseases plaguing people today. In fact, it’s also labeled as a “silent killer” because of how too late a diagnosis often comes. Monitoring one’s glucose or blood sugar levels, after all, is a literally painful procedure that most people would avoid, including diabetics themselves. There is a great and urgent demand for non-invasive glucose monitoring solutions, and Samsung is apparently already eyeing that achievement.

According to the company’s digital health chief, Hon Pak, Samsung is really pushing hard to make this innovation available in a future version of its Galaxy Watch wearables, like the Galaxy Watch 6 pictured in this piece. A non-invasive blood sugar monitor, together with continuous blood pressure monitoring, would definitely put Samsung at the head of the race. Of course, it’s easier said than done, and even the exec can only hope that the technology and the product will be available within the next five years.

It can’t take its sweet time either, because in addition to medical equipment manufacturers trying to cash in on this potentially lucrative future market, Samsung is also racing against Apple. The Cupertino-based company whose Apple Watch has become synonymous with life-saving wearables, has long been reported to be working on a solution as well. Such a smartwatch with a non-invasive glucose monitor will surely be a reality, but whoever gets there first will be able to claim a large share of the market.

Then again, diabetics and healthcare workers probably care less about who launches a design first, as long as a reliable product does indeed arrive. There are already a few non-invasive monitors that indirectly compute glucose levels from other biometrics, but their accuracy is often still in question. A smartwatch might not even be as accurate as those, but anything that will give wearers the faintest clue is still significantly better than not knowing at all until it’s far too late to make a difference.

The post Samsung Galaxy Watch non-invasive glucose monitor will be a live-saving game-changer first appeared on Yanko Design.

Designers envision a stylish face mask to dive right into polluted air

Posted on by

The COVID-19 pandemic is behind us. Some (would be an understatement) almost all of us have given up on face masks and are breathing fresh air. Are we actually? There is a reduced risk of the virus but new subvariants are propping up with time and the air pollution levels, almost everywhere, are crashing past the WHO particulate matter ratings. As a result, high-grade fevers, cough, cold, lung and heart diseases are catching us faster than ever before, and the only instant solution in sight is to put air purifier on our faces that can prevent viruses and polluted air from traveling down our gut.

In an analogy of a post-COVID environ where we must wear a mask for clean air, with equal necessity of a scuba diver for breathing underwater; this capable face mask, modelled after the fish and the functions of the gills, presents a novel solution. Dubbed the Air-Diver, the face mask is designed because “in the polluted air, we become a diver;” and a diver is no good without a face mask pumping in oxygen to facilitate breathing.

Designers: Doyoon Kim and seongmin Ha

The Air-Diver is not instinctively doing that; primarily with onboard filters, it is meant to help the wearer breathe in clean, fresh air and help reduce exposure to airborne particulate matter. This electronic mask helps regulate air purification and the supply of clean air depending on the pollution level of the surroundings.

To that accord, it can be used in crowded places or in everyday moments to help filter pollutants. The white mask which seems a rip off of what Darth Vadar might prefer on Earth, it allows the air from outside to be filtered through its external filter. This is then refiltered using a photocatalyst filter and an H1 class HEPA filter inside the mask before it is inhaled.

Through the left and right air intake holes fresh air is available for the user, which can be increased at will with the releasable oxygen capsule (that is inserted into the sides of the mask) for extended usage or in densely polluted spaces while the heat and exhaled carbon dioxide is released through the opening on the front. The air capsules are provided separately. The Air-Diver is designed with an air presser – silicon ribbing – that inflates to adjust the mask and fit snuggly to the face so you are nicely covered and safe for walking into the polluted air.

The post Designers envision a stylish face mask to dive right into polluted air first appeared on Yanko Design.

Amazfit Helio Ring joins the fray with a focus on athletes’ well-being

Posted on by

Now that smartwatches have more or less become more acceptable in society, it seems that the wearable tech market is setting its eyes on less conspicuous and less distracting designs for monitoring one’s health and fitness. And just like smartwatches in their early years, smart rings just aren’t resounding yet with people, though that could only be a matter of time. There hasn’t been much variety yet in this nascent market, which isn’t surprising given the physical limitations of a ring. Wearable tech brand Amazfit, however, believes it has something unique to offer, at least to athletes and very active people who are just as concerned with their mental health and recovery as they are with their steps and heart rate.

Designer: Amazfit

The niche that smartwatches have found themselves in seems to revolve around fitness and health, with features like activity tracking, health monitors, and the like. While those are indeed important metrics, they only represent a part of one’s overall well-being. Mental health is just as important, and giving your body and mind time to rest and recover is critical as well. Those are the points that the Amazfit Helio Ring is trying to emphasize in order to differentiate it from the likes of the Oura Ring, currently the leading name in this very young and small market.

In a nutshell, the Amazfit Helio Ring takes the same data collected by sensors inside the ring but interprets them in a slightly different way. Of course, it still records your steps, tracks your blood oxygen levels, and even monitors your sleep, but it frames that information in light of stress levels, your mental health, and most importantly, how well you’re taking steps to recover from those. Amazfit will propose actionable steps to guide you toward recovery, which unsurprisingly include getting enough sleep and meditation.

As for the device itself, the Amazfit Helios Ring is a bit of an outlier in that it doesn’t try to masquerade as a piece of jewelry. The dotted pattern on its surface is a dead giveaway that it is anything but luxurious, giving it a more rugged appearance that its target audience won’t mind anyway. In fact, it is intentionally designed for this group of people, using “skin-friendly” titanium alloy and ensuring water resistance of up to 10ATM, for those times when you need to take a swim.

The Amazfit Helios Ring can be used on its own, with or without an Amazfit smartwatch. Of course, you will need to pair with the mobile app, but you will also need to subscribe to the Zepp Aura rest and wellness service to really use the data it gives. A purchase of the ring will include a three-month free trial, but there are no pricing details available yet.

The post Amazfit Helio Ring joins the fray with a focus on athletes’ well-being first appeared on Yanko Design.

Retro Gaming Watch puts a tiny handheld on your wrist, also tells the time

Posted on by

There’s a retro design craze that’s gripping multiple industries, from fashion to music to gaming. The latter is probably one of the most prolific sectors, spewing out new designs based on old models every year or sometimes more than once a year. Regardless of the origin, almost all these retro gaming devices have the same goal of allowing people today to experience the games of the past the way they were meant to be played, at least to some extent. Some, however, do try to just mimic the looks while offering a bit more freedom in what you can do with the device, like this rather unusual Game Boy SP look-alike that’s meant to ride on your wrist and act as a smartwatch when you’re not playing games on it.

Designer: Jason Rogers

There’s no shortage of small gaming handhelds, some of which can even be attached to a key ring. They’re not great at comfort or ergonomics, but these novelty items capture a lot of attention and even let you play a few retro games on the fly. You do have to take them out or pull them off your key ring before you can use them, though, which translates to seconds or minutes of lost opportunities.

The Retro Gaming Watch loses no time, no pun intended, by having that gaming handheld always at hand, or in this case, on your wrist. In its inactive, unused form, it masquerades as a regular though thick smartwatch, with a standard squarish display and typical features such as a digital watch face and notifications. It doesn’t have activity tracking, though, because that would require cramming more hardware in an already cramped space, space that would rather be used for running games instead.

1

The watch changes its tune the moment you detach it from its strap, unfolding to reveal a clamshell-style gaming device not unlike the Nintendo Game Boy SP. Given the existence of gaming devices smaller than this, it shouldn’t be a surprise that the Retro Gaming Watch can handle a few emulated games, at least the 8 to 16-bit titles that can fit in the device’s small memory. Where you get your emulated content, of course, is up to the reader’s ingenuity.

The Retro Gaming Watch is supposed to be a sort of counter-movement to the “Great Conformity” that is happening in a world filled with Apple Watches and its clones. It recalls a time when watches looked fun and could even be used as toys, at least for a younger crowd who wouldn’t be embarrassed wearing bulky and sometimes gaudy designs for everyone to see. Again, it’s not going to offer the best gaming experience, presuming it even becomes an actual product, but it has that novel character and rebellious spirit that’s going to tickle the fancy of many gamers, even if they’re just gonna wear it for show.

The post Retro Gaming Watch puts a tiny handheld on your wrist, also tells the time first appeared on Yanko Design.

Modular mixed reality goggles aim for a fusion of fitness and fashion

Posted on by

Smart eyewear is back in fashion, especially thanks to Apple finally announcing the Vision Pro. Although its design pretty much still falls under the “headset” category, the ultimate goal of many of these wearables is to be as inconspicuous are regular spectacles or sunglasses as possible. Easier said than done, of course, especially when you need to cram plenty of electronics in such a small space. There are advancements in that area, of course, to the point that it might be possible to fit almost all the necessary components on or near the lenses. That kind of technology will open the doors to a wider variety of wearable designs, including one where you can swap frames to be as sporty or as classy as you need your mixed reality eyewear to be.

Designers: Ben Melvin, Jo Barnard, Dan Lloyd, Harry Mason (Morrama)

There are actually quite a number of designs for smart eyewear, depending on how complicated they need to be. Some include more complex computers and the usual design involves a headband that you wear around your head. Others simply mirror the screen from your phone or computer, so they can just look like overgrown sunglasses. But if you can settle for something even simpler, you might be able to condense everything around the lenses so that the frame is really just a frame, one that you can even replace more easily than with prescription glasses.

Morrama Issé is a concept for mixed reality eyewear that takes advantage of such a design by making the lenses and the frame two connected but independent pieces. The lenses are not your average pair and look more like sports visors. The rim of the visor is quite thick which is where all the electronics will be hidden. In other words, the visor can function on its own without the frame, and the frame only provides the structure that will hold the visor up on the wearer’s face.

This means that the frames are interchangeable, letting the wearer choose the style of the frame depending on where they want to wear the mixed reality goggles. These can be rugged or elegant, at least as elegant as possible considering the rather thick frame required to support the weight of the visor part. More importantly, however, the frames can be made using more sustainable and recyclable materials since this part usually has a shorter lifespan.

The Morrama Issé design is no Minority Report or Tony Stark, and you will still look conspicuous if you will be wearing such eyewear in public. Of course, the primary use case for the wearable will be for fitness, where the goggles will provide the relevant biometrics and information that people need when training or exercising. It’s pretty much the same data that your smartwatch would show, except it will always be within your field of vision. Not everyone will find the aesthetic that pleasing, but Issé’s innovation is how it is able to envision a more modular approach to designing mixed reality eyewear, especially with a bent towards more sustainable options.

The post Modular mixed reality goggles aim for a fusion of fitness and fashion first appeared on Yanko Design.