LAYER’s Ripple Dining Table Uses a Wavy Plywood Core to Cut Weight

Large dining tables are useful right up until you need to move one, when their reassuring weight becomes somebody else’s lifting problem. LAYER’s Ripple research table explores a lighter construction by giving thin plywood a corrugated profile instead of relying on a thick slab. That said, the project keeps a flat surface for everyday use while putting the waves underneath, mostly hidden from view.

The original table was specified at approximately 8.2 feet long and 39.4 inches wide, weighing about 19.8 pounds. That’s a generous dining surface for something intended to be moved by one person. Bringing it across a room for guests or shifting it away from the wall could become less of a coordinated household event. Its footprint, however, doesn’t shrink along with its weight.

Designer: LAYER

The material comes from a collaboration with Canadian manufacturer Corelam, using pressure lamination to form the repeating curves. LAYER specifies plywood approximately 0.12 inches thick, although that isn’t the overall depth of the assembled tabletop. The distinction matters here: the design gets its structure from a shaped sheet and layered construction, rather than pretending a thin, flat board can do everything alone.

Of course, a wavy dining surface would be a fairly annoying place to balance your coffee. Ripple covers its corrugated structure with a flat plywood sheet, leaving the waves visible below and along the edge. Plates and laptops get the ordinary surface they need, while the underside carries the more unusual geometry. The useful part doesn’t have to look particularly experimental from above.

The legs follow the same preference for shape over bulk. A refined version uses hollow triangular profiles, designed to increase rigidity in two directions. The tabletop’s underside also curves gently across its length and width. Those changes address a fairly obvious concern with lightweight furniture: being easy to pick up is only useful if the table still supports what you put on it.

The red finish keeps Ripple from disappearing into the background, even with such a thin outline. From the side, the top appears almost like a sheet balanced on four narrow supports. Along the short edges, the repeating curves reveal why that impression is misleading. The structure supplies its own ornament, without adding a carved border or a heavier decorative frame.

Using less wood is part of the environmental argument, too. The project’s original documentation claims 70% to 80% less material than a standard timber table, but doesn’t establish a defined comparison for that figure. Less material isn’t automatically a complete environmental assessment, either. Adhesives, finishing, production, and working life still matter, even when the basic idea of doing more with less is appealing.

LAYER presents Ripple as a studio research project, without a current retail price or ordering details. The construction offers an answer for people whose furniture has to move with them, though size remains a constraint. You might no longer need help with the lifting, but you’d still need a clear route through the house before taking that tabletop around a corner.

The post LAYER’s Ripple Dining Table Uses a Wavy Plywood Core to Cut Weight first appeared on Yanko Design.

This glowing modular moss panel system might be the coolest way to fix a boring room

Moss has been on this planet for around 450 million years, which means it predates dinosaurs, continents as we know them, and the concept of a watering schedule. The plant’s actual trick is that it has no roots and absorbs everything it needs directly through its surface, which makes it one of the most low-maintenance living things you could put in a room. Interior designers figured this out around 2015 and started installing living moss walls everywhere from hotel lobbies to coworking spaces, at which point the rest of us learned that professional moss wall installation costs roughly what a decent used car costs. A consumer-friendly version of that idea has been weirdly slow to materialize. MOSSLAB designed Moss Hexa around that natural biology, using a soil-free system that reduces day-to-day care while preserving the texture and presence of real moss.

Moss Hexa is a modular moss system using 100% real moss panels in a hexagonal format, mounting via a proprietary magnetic system called HexaLock that lets you click panels into place, rearrange them, or swap them out without tools. Three panel types handle the main use cases: Basic for pure moss texture and color, Light for integrated LED ambient lighting with an auto-dimming sensor and app control, and Wood for warmth and visual rhythm as an accent. MOSSLAB, the South Korea-based studio behind the award-winning Moss Air and Moss Echo, built all three modules to share the same mounting hardware, making the whole system genuinely expandable over time without disturbing anything already on the wall. Pricing runs from a discounted $59 for the 3-panel Basic Starter Pack, with larger configurations available at campaign-exclusive pricing.

Designer: MOSSLAB

Click Here to Buy Now: $59 $90 ($31 off). Hurry, only a few left!

Hexagonal patterns appear throughout nature because they connect efficiently, repeat beautifully, and expand with minimal wasted space, from honeycomb structures to cellular geometry in biological tissue. MOSSLAB’s choice of the hexagon as Moss Hexa’s base unit is a structural decision that determines how the system scales and how freely it grows, and it pays off. Each panel measures 8.27 × 7.09 × 1.42 inches (210 × 180 × 36 mm), and because hexagons share flat, parallel edges on all sides, tiles can cluster in multiple directions without gaps or forced symmetry. The system offers preset configurations of 3, 9, and 15 panels, but the geometry means there’s nothing stopping you from building something in between. It holds up when you pull everything down six months later and try a completely different arrangement from scratch, which is the whole point.

The Basic panel features 100% real moss that is naturally drought-tolerant, requires no direct sunlight, and needs only occasional light misting to stay at its best. Its frame is made from PC and steel, with magnetic components, and the whole panel weighs just 0.75 lb (338 g). The moss retains its color and three-dimensional texture between mistings, helping preserve the natural depth and organic character that distinguish real moss from artificial alternatives. The Wood panel uses the same HexaLock mounting footprint but replaces moss with a warm wood-finish surface, designed as a compositional accent rather than a primary surface. A mostly-moss arrangement with a few Wood panels breaking the pattern is the right call; the contrast reads as intentional interior design rather than a texture experiment that got away from you.

Each Light panel combines 100% real moss with built-in ambient lighting designed to bring out the moss’s natural depth, color, and texture while changing the atmosphere of the surrounding space. Brightness can be adjusted from 1–100%, with a maximum power draw of 7W per panel, while a built-in ambient light sensor automatically adapts the lighting as the environment changes. Light panels connect directly to one another through USB-C-to-USB-C connections, and one Control Hub & Power Adapter can support up to nine Light Panels. The Hexa App provides manual lighting control, lighting presets, and Natural Daily Rhythm scheduling, giving users more flexibility to shape the atmosphere throughout the day.

Sound absorption performance was independently measured by KCL, a KOLAS-accredited laboratory recognized under the international ILAC-MRA framework, using a Moss Echo installation made with the same real moss material used across MOSSLAB’s Moss product line. Covering nearly 11 m² with approximately 300 moss panels, the installation was tested in a large-scale interior setting. The test recorded sound absorption of 27% at common speech frequencies, increasing to 56% at frequencies associated with keyboard typing and up to 65% at higher frequencies associated with background chatter. Those results add a functional layer to real moss beyond its visual and tactile presence. Because the test was conducted using the same real moss material found in Moss Hexa, the takeaway is not that Hexa replaces dedicated acoustic treatment, but that the material itself brings measurable sound-absorbing properties into a system designed to change how a space feels.

Powered by the HexaLock™ magnetic mounting system, each panel snaps into place with a single click, no complicated measuring, no specialist tools, no installation experience needed. You attach the mounting guide to your chosen surface, and both screws and adhesive mounting options are included. The guide handles alignment automatically, so panels sit consistently without leveling. The key design call is that Basic, Light, and Wood panels all share the same HexaLock™ footprint, meaning you can swap any panel type for any other at any point without touching the wall hardware. You can start with 3 Basic panels, add Light panels as a seasonal upgrade, and work toward a 15-panel Signature Styling set across multiple additions, all from the same original wall installation. The dual mounting option, screws for homeowners and adhesive for renters, is a small detail MOSSLAB got right, and the kind of thing you only think to include if you’ve genuinely considered your customer’s actual living situation.

Moss Air earned a CES Innovation Award, an iF Design Award, and an IDEA Design Award, and MOSSLAB has also participated in an open innovation program with a major Korean conglomerate, and in 2025 was the only international startup chosen among five for Panasonic’s Electric Works accelerator program. These are production-level credentials, not concept-stage accolades, and they matter when evaluating a new product that ships internationally. The Basic Starter Pack (3 panels) will be available for $59 during the first 72 hours of the Kickstarter campaign launch, the Light Starter Pack (3 panels) at $99, and the 9-panel Basic and Light Standard Packs starting at $159 and $229, respectively. The 15-panel Signature Styling Pack, which combines Basic, Light, and Wood panels, starts at $339 during the same launch period. Individual add-ons are available at $25 for a Basic Panel, $40 for a Light Panel, and $24 for a Wood Panel, while an additional Control Hub & Power Adapter Set is $23. Estimated U.S. shipping starts at $25 for a 3-panel configuration, with fulfillment estimated to begin in June 2027.

Click Here to Buy Now: $59 $90 ($31 off). Hurry, only a few left!

The post This glowing modular moss panel system might be the coolest way to fix a boring room first appeared on Yanko Design.

This chrome skeleton is the most extra mechanical keyboard ever made

In 2006, Dutch designer Joris Laarman fed a bone growth algorithm into a computer and got a chair that looked grown rather than built. His Bone Chair became a landmark of generative furniture, and every hollowed out, nature mimicking object since has lived in its shadow. Zaha Hadid’s flowing buildings, Ross Lovegrove’s organic forms, and Neri Oxman’s computational experiments all share that family tree. Chairs, buildings, and lamps have all been invited to the reunion. Keyboards, strangely, never got the invite.

Pulse One, designed by Haoyuan Lu of New York based Pulsekey, is the late RSVP. Its 3D metal printed shell was shaped through generative design and digital sculpting, fusing the palm rest, frame, and bezel into one mirror finish lattice that looks like a skeleton went to a spa. White keycaps float above clear switches, and the board runs wireless. It earned Silver in Consumer Electronics / Computer Accessories at the International Design Awards. This is the most extra keyboard ever made, and I say that with admiration.

Designers: Haoyuan Lu, Hongbin Zhang & Wendi Yu

The closest pop culture cousin is the T-1000, the liquid metal assassin from Terminator 2: Judgment Day in 1991. That movie made flowing chrome terrifying, and designers have been borrowing the look ever since, minus the murder. Pulse One has the same mercury sheen, and every curve catches the light and stretches it into long silver ribbons. Park it on a desk and your monitor suddenly has a reflection to argue with. I would not outrun it, but I would happily let it sit next to my coffee.

Generative design, in general, works by handing a computer a set of goals and letting it propose the shape. The software piles material where a structure needs it and strips it away where it does not, which is why the results look so organic. You can see that logic in Pulse One’s shell, where big elliptical voids sit beside slim, tapering bridges of metal. Lu’s team then refined the form through digital sculpting, which is how a machine’s cold logic ends up looking this graceful. It reads as grown, much like Laarman’s chair did.

Folding the palm rest, frame, and bezel into one piece also cleans up a messy corner of keyboard design. Most boards stack a case, a plate, and a wrist rest, each with its own seams, screws, and opinions about alignment. Pulse One’s shell sweeps all of that into a single form that cradles the switches and tilts them toward your hands. A few small screws are still visible in the photos, so it is not magic, only very tidy engineering. Your wrists get a sculpted perch where a foam strip usually lives.

Under all that sculpture sits a keyboard people can actually live with. The campaign pitches it as wireless, hot-swappable, and good for weeks on a charge. Hot-swap sockets let you pull a switch and drop in another without a soldering iron, and one product photo shows exactly that, a lone switch pulled out beside a stray arrow keycap. The entry also describes the construction as modular, built for maintenance, customization, and renewal. Basically, it looks like a museum piece and behaves like a tinkerer’s board.

The post This chrome skeleton is the most extra mechanical keyboard ever made first appeared on Yanko Design.

Twelve New Designs in Six Weeks: Why I Love the new Apple under John Ternus

For fifteen years, Apple was the friend who shows up to the party an hour late and then insists it brought the best snacks. Tim Cook even had a motto for it, saying Apple was perfectly fine with not being first. Then John Ternus took over on September 1, and the snack table got crowded fast. In six weeks Apple has revealed the foldable iPhone Duo, a HomeView smart display in tabletop and wall-mounted versions, and nine smart home accessories. That makes twelve fresh designs, a wild number for a company that used to agonize over one hinge.

HomeView and the foldable will get the splashy coverage, but the real fun is the smart home gear. LG Electronics and Schneider Electric helped Apple build a video doorbell, a floodlight cam, outdoor and indoor cams, a deadbolt, two thermostats, and two sensors. They start arriving in December, with prices running from $39.95 for a sensor to $399.95 for the floodlight cam. Apple’s fingerprints are all over them, from the aluminum to the black glass to the rounded shapes. I am here to tell you why that deserves a small celebration.

Designers: LG and Schneider for Apple

The ROKR Taught Apple to Keep the Design and Rent the Factory

In September 2005, Steve Jobs launched the Motorola ROKR E1, a rebadged Motorola phone with an iTunes button and a cap of 100 songs. The demo stumbled and the phone flopped. Jobs looked pained onstage, and you can see why, since Apple’s software was riding around in someone else’s hardware. Roughly sixteen months later he unveiled the iPhone. The ROKR was a stepping stone he needed, taken at exactly the moment he needed it.

Ternus gets to run that play with the lesson already learned. Bloomberg reports that Apple shaped the design, features, and engineering of the LG gear, while LG handles manufacturing and support. The ROKR was Motorola’s design wearing Apple’s software. This is Apple’s design wearing LG’s factory. Ternus joined Apple in 2001, so he watched the ROKR saga from the inside, and the LG deal likely began on Cook’s watch but ships under Ternus, which puts it in his column.

Nine Products, One Family Look From Two Different Companies

Line up the lock, camera, thermostat, and doorbell from Apple’s photo and the family resemblance is hard to miss. The Smart Deadbolt pairs a black glass keypad with a pill-shaped aluminum plate, and the Video Doorbell is an aluminum column capped in black glass. The Indoor Cam’s round head swivels on a chrome pivot that echoes the hinge on HomeView. The big 68 on the thermostat belongs to Schneider, yet it shares the same soft rounded-square body. Two companies, one look.

The Indoor Cam physically tilts down to stop watching the moment the first person gets home, which is the friendliest privacy gesture I have seen on a camera. The doorbell carries a 2.5K front camera plus a 1080p lens aimed at the doorstep for packages. The deadbolt uses Ultra Wideband (a precise short-range radio) to unlock as you walk up with your iPhone or Apple Watch, and it keeps working without internet. Everything sets up with one tap on your iPhone. There is no extra app and no extra account.

Ternus Ships What Is Ready Instead of Waiting for Perfect

Cook’s way was to wait until Apple could do it perfectly, and the home hub paid for it, slipping from spring 2025 while Siri caught up. Ternus, per Bloomberg, wants Apple to ship faster, experiment more, and spread launches through the year instead of two big events. HomeView still waited for Siri AI, so the rulebook did not change overnight. What changed is that the wait no longer stalls everything around it. The doorbell, lock, cameras, and thermostats are ready now, and Apple is shipping them.

The Home Collection starts at $39.95 for a sensor, with the lock at $349.95 and the floodlight cam topping out at $399.95. It arrives in December in the U.S. and Canada, the cameras and doorbell are also heading to the UK, and select items slip to early 2027. You can see the full lineup in Apple’s Home Collection announcement. Cook’s Apple was the friend who showed up late with the best snacks. Ternus’s Apple shows up on time, brings the snacks, and lets someone else carry the cooler.

The post Twelve New Designs in Six Weeks: Why I Love the new Apple under John Ternus first appeared on Yanko Design.

Meet Apple HomeView: A weirdly genius combination of the iMac, Watch, iPad, and HomePod

Apple’s design team apparently raided four different family albums and stitched the best bits into one object. HomeView has the iMac G4’s floating-screen silhouette, Apple Watch-style faces, the iPad’s slab of glass, and a speaker base that recalls the HomePod. I have a soft spot for that sunflower-lamp iMac, so seeing a dome and a tilting display make a comeback in 2026 made me unreasonably happy. Somehow the pile of parts works visually. It looks like a lamp, has a tablet’s touchscreen, and doubles as a speaker.

Apple announced HomeView on October 13, 2026. It pairs a 7-inch Liquid Retina screen with a domed aluminum speaker base and a stainless steel hinge that lets you tilt the display. An A18 chip and the rebuilt Siri AI run the show, and Apple says it recognizes up to six enrolled users, each with a personalized experience. A wall-mounted version offers the same screen and core functions, though its speaker hardware differs. Both models cost $299 in the U.S., with preorders open and availability scheduled for November 13, 2026.

Designer: Apple

The iMac G4’s Dome and Personality Make a Comeback

The iMac G4 arrived in January 2002 with a 15-inch flat panel hovering over its base. Its sunflower-inspired form emerged from Steve Jobs and Jony Ive’s design discussions; Walter Isaacson’s account credits Ive with suggesting that the screen be separated from the base like a sunflower. HomeView echoes that silhouette but swaps the long swinging arm for a compact hinge, which suits a counter where nobody wants a lamp neck knocking over the olive oil. The tilt adjustment gives you some latitude on a low nightstand or a tall kitchen island.

The G4 showed how much personality a computer’s shape could carry. HomeView’s similar stance makes a box packed with a camera and microphones look friendlier, at least to my eye. A dome with a head-on-neck posture reads more like a desk pet than a gadget, which is a handy trick for something that recognizes faces. The thick black bezel is a taste call I’m happy to defend: it gives the Photos face a proper picture-frame border.

Apple Watch-Style Faces and iPad Glass Decide What You See

The screen looks like it comes from the iPad side of the family: a square slab of glass with rounded corners and a front camera for FaceTime. Center Stage adjusts the framing as people move or join the call. Apple lists a brightness range from 500 nits down to 0.3 nits, allowing the display to dim substantially at bedtime. True Tone adjusts the white balance to ambient lighting. Selected interface elements also respond to your distance, showing simpler information across the room and more detail as you approach.

The faces feel distinctly Apple Watch-like. Photos offers Portrait-style depth effects, while Flow reacts to movement in the room. Snoopy’s animations respond to the time of day, weather, and sporting events, a very Watch way of being useful and adorable at once. Home Modular puts favorite accessories on one dashboard, and Home Camera can stream up to nine video feeds at once. Fan designers were exploring this territory years ago. Justin Latham’s HomePod Nano concept, which we covered in 2023, imagined a speaker with a display running a proposed watchOS fork. It was a fan concept, not an Apple product or working software announcement. HomeView’s Live Activities surface the current song, an active timer, or an incoming Intercom message, bringing that glance-and-go logic to a household screen.

The Speaker Base Does the Heavy Lifting

The base recalls the HomePod, although Apple’s images show a perforated, color-matched exterior rather than the HomePod’s fabric mesh. Small grille holes also run along the display’s lower edge. A down-firing woofer and two force-cancelling passive radiators sit in the base, while two full-range drivers occupy the display.Apple says computational audio uses its silicon and onboard sensors to adjust loudness and bass response in real time.  The wall-mounted model has two full-range drivers but no base-mounted woofer or passive radiators, so the two versions shouldn’t be treated as acoustically identical. HomeView supports multiroom audio alongside HomePod, HomePod mini, and AirPlay-compatible speakers. Intercom also reaches HomeView and HomePod speakers elsewhere in the house.

The original HomePod was announced in 2017 at $349, when we dubbed it Apple’s “tune-busting Fabergé Egg.” Against that historical price, $299 for a speaker, screen, camera, and face recognition looks tempting on paper. You can pre-order HomeView on Apple’s site now, with both the tabletop and wall-mounted models arriving November 13. The tabletop unit ships with a color-matched USB-C cable, while the wall version relies on Schneider Home’s power mounts, which start at $59.95 and are sold separately. Siri AI launches in beta and in English, and Apple is not selling HomeView in the EU for now. Every ancestor in this object was Apple’s bet on a different decade, and HomeView is the first time they all share one counter.

 

The post Meet Apple HomeView: A weirdly genius combination of the iMac, Watch, iPad, and HomePod first appeared on Yanko Design.

GELATO Glass Candle Holder Keeps Its Swirl While the Candle Melts

Soft-serve ice cream rarely keeps its perfect swirl for long, which is part of the appeal and occasionally a problem for your shirt. GELATO turns that fleeting shape into a glass candle holder, with rounded coils that seem ready to slide onto the table. A handcrafted piece from the 2026 GLASS DESSERTS collection, it keeps the dessert around after dinner without needing a freezer.

The resemblance comes from a continuous spiral that widens toward the bottom, where the glass spreads into an irregular base. Above it, generous bulges wind around the candle rather than forming a straight, anonymous stem. There’s something amusing about putting a perfectly upright taper into such a relaxed shape. The wax looks orderly, while its holder seems to have given up on that idea.

Designer: Monika Pacíková

That looseness comes from how the material is handled, according to the maker. The pieces are handcrafted at Czech glassworks, where the behavior of hot glass helps determine the finished form instead of being forced into identical results. Each holder follows the same swirling idea, but small differences remain. Buying a pair doesn’t mean getting two mirrored objects for the dining table.

Clear Bohemian crystal makes those differences noticeable, because the overlapping curves bend and distort whatever sits behind them. Even a plain candle becomes part of the decoration as its color appears through the surrounding glass. Without an opaque finish hiding the shape, the rounded surfaces do most of the work. It’s a confectionery reference that doesn’t need pastel icing to get the idea across.

Of course, the alexandrite glass version brings its own color, shifting between purple and blue under different lighting. This is a property of neodymium-containing glass, not an iridescent coating applied to its surface. The effect depends on the light source, so don’t expect the same shade everywhere. Moving the holder to another room could change how it fits into your decor.

You can keep one on a sideboard, place a pair on the dining table, or gather several into a more playful centerpiece. The individual variations give a group some movement without needing different designs. They also have enough visual interest to remain on display between meals. You don’t have to light the candles every time you want the arrangement to feel complete.

Despite that softened appearance, GELATO isn’t a lightweight ornament. The listed height is approximately 6.7 inches, with each piece weighing about 3.5 pounds. That’s worth considering if you’re planning a larger arrangement or moving it around regularly. The broad glass base needs its own space, too, so leave room for the dinner plates rather than treating it like a narrow candlestick.

The post GELATO Glass Candle Holder Keeps Its Swirl While the Candle Melts first appeared on Yanko Design.

5 Best Pocket-Sized Gadget Designs That Give Your Phone a Break

You reach for your phone to change a song, take a picture, or read a few pages. The task takes seconds; everything surrounding it is ready to keep you longer. A dedicated gadget gives that small action its own place to happen. Press a button, turn a page, put it away. Something is appealing about an object that knows its job and doesn’t immediately suggest five others for your attention.

These five designs take familiar phone functions and give them separate bodies, from a music player with an unusually placed screen to a camera disguised as a film canister. The MAD-5 is a concept, while the other selections are retail products, with availability noted below. This is a design roundup based on published specifications, not hands-on testing, and the largest pick belongs in a coat pocket rather than tight jeans.

1. BluHub

BluHub’s lid opens like a miniature grand piano, displaying a spare disc while another sits inside the working drive. The design combines Blu-ray, DVD, and CD reading and writing with USB expansion and memory card readers. Connected to a compatible computer, it offers a way to revisit a physical music collection or archive photographs outside a cloud service. The lid gives those discs a visible place on the desk, although the displayed disc isn’t the one being played.

This is a portable computer accessory, not a standalone player or a pocket-sized device. Its aluminum body measures 165 × 160 × 34 millimeters and weighs 409 grams, making a laptop bag the more sensible home. The advertised 100GB recording capacity requires suitable BDXL Blu-ray media, not ordinary DVDs. BluHub’s maker estimates shipping will begin in November 2026, so delivery remains a crowdfunding promise. Its appeal is bringing discs and peripheral connections together, rather than directly replacing a phone function.

What we like

  •  Combines an optical drive, USB hub, and memory card readers in one accessory.
  • The flip-up lid displays a spare disc without occupying the working drive.

What we dislike

  • Its size and 409g weight don’t fit the roundup’s pocket-sized promise.
    It needs a compatible host device, and the estimated November delivery isn’t guaranteed.

2. MAD-5

Florent Porta’s MAD-5 puts its blue display on the front edge of a square aluminum body, where track information could remain visible when the player is clipped to clothing. That placement is the interesting part. Instead of treating the clip as an accessory, the concept makes it central to the interface. A circular navigation surface and physical buttons keep the face simple. For listening on a walk, the arrangement would let the music stay separate from messages and app switching.

The design also proposes USB DAC functionality, allowing the player to handle audio from a connected computer. That gives the object a plausible role at a desk as well as on the move. Its resemblance to Teenage Engineering’s TP-7 stops at the circular face, though: there’s no motorized reel here. More importantly, MAD-5 remains a concept rather than something you can order. The compelling idea is its relationship between wearing and reading, with sound quality still unproven in actual use.

What we like

  • The edge display considers how a clipped player would be viewed.
  • Proposed USB DAC functionality gives it a useful second role.

What we dislike

  • It remains a concept, with no retail release.
  • Bluetooth and expandable storage aren’t specified in the published design.

3. Analog Capsule Camera

A film canister is an odd place to put a camera, which is what makes the Analog Capsule memorable. The ABS body measures about 45 millimeters across and 47 millimeters tall, with a listed weight of 25 grams before adding a memory card. It’s a digital camera, despite the name, and the included strap lets it hang from a bag. For casual snapshots, the appeal is having a separate object to reach for without unlocking your phone or opening apps.

Built-in playback lets you review photographs, while USB-C and microSD storage keep the process digital from capture to transfer. That distinction matters: a film-shaped shell doesn’t make this a film camera, and its aesthetic shouldn’t be mistaken for versatility. At its listed $55 price, consider it a playful sidekick for casual pictures, not a phone camera upgrade in detail or shooting flexibility.

Click Here to Buy Now: $55.00

What we like

  • The 25g body and included strap make carrying a separate camera less demanding.
  • Digital storage avoids the expense and waiting associated with film processing.

What we dislike

  • A 1 megapixel sensor limits captured detail.
  • The tiny 80 × 160 pixel display offers a limited area for reviewing photographs.

4. Playdate

Playdate’s fold-out crank gives your fingers something a phone screen cannot offer. It’s an analog game controller, not a charging handle, and some games build their mechanics around its rotation. Panic created the console, with hardware design by Teenage Engineering, giving the yellow handheld a clear family resemblance to purposeful electronic tools. At 76 × 74 × 9 millimeters, it makes a convincing pocket companion. A D-pad and two main buttons provide more familiar controls when the crank isn’t needed.

The package includes Season One’s 24 games, delivered two at a time over 12 weeks after setup. That gives the hardware a library designed specifically for its unusual controls, rather than asking it to imitate a phone. The black-and-white screen has no backlight, making available light part of where you can play. At $229 before taxes and shipping, this is a considered purchase. Choose it for games that make something of those physical controls, not for a larger gaming library.

What we like

  • The crank, D-pad, and buttons offer interactions beyond touchscreen tapping.
  • Season One’s 24 games are included with the console.

What we dislike

  • The screen has no backlight for low-light play.
  • At $229, it’s a substantial purchase for a device dedicated to one activity.

5. CasaBeam Everyday Flashlight

The phone flashlight is convenient until you need to keep using the phone. HOTO’s CasaBeam Everyday Flashlight puts lighting in a dedicated body with a front section you twist to adjust the beam. Choose a focused spotlight or a wider floodlight, then add the included diffuser cap for lantern use. Standing it upright frees your hands for other tasks. The design gives you several ways to direct light without balancing your phone against an object.

The Shop lists three brightness levels, a maximum output of 1,000 lumens, and USB-C charging beneath the zoom head. Its claimed 24-hour runtime applies to low brightness, not maximum output. Size deserves equal attention: at 6.14 inches long and 175 grams, CasaBeam is a coat-pocket proposition rather than a tiny jeans-pocket accessory. For evening walks or occasional lighting jobs, that bulk may be worthwhile. At $50, the question is how often you need lighting beyond a phone’s quick, close-range illumination.

Click Here to Buy Now: $50.00

What we like

  • Adjustable spotlight and floodlight.
  • Diffuser included for lantern use.

What we dislike

  • The 175g body demands pocket space.
  • Maximum claimed runtime requires low brightness.

One Extra Device Is Enough

A pocket full of replacements would defeat the point for most people. You would gain a collection of charging routines, storage decisions, and objects competing for limited space. A useful approach is to notice which phone task you’d enjoy giving its own device. Reading is different from photography; lighting is different from play. Pick the interruption you want to avoid, then decide whether the extra object earns its space.

Keep the phone for the jobs where its flexibility matters. There’s no prize for making navigation, communication, or sharing unnecessarily difficult. A dedicated gadget becomes interesting when its shape or controls change what you do, not simply because it removes an app. The strongest reason to carry one is straightforward: you prefer taking that picture, turning that page, or playing that game on an object designed specifically for the task.

The post 5 Best Pocket-Sized Gadget Designs That Give Your Phone a Break first appeared on Yanko Design.

This 9-in-1 folding titanium ruler can draw circles, slice paper, and eject your SIM card

Measure twice, cut once is solid advice that skips a few steps. Somewhere between the measuring and the cutting you also need a pencil, a square, a knife, and usually a level, and they are never in the same place. Every maker knows the shuffle of patting down pockets for a stub of graphite. It is the least glamorous part of any project, and nobody has bothered to design around it. MakerPi did.

The Tiruler 2.0 is a folding ruler from MakerPi in Hong Kong, built from Grade 5 titanium and brass. Its two 3.94-inch (10 cm) arms carry a magnetic pencil, a magnetic knife, a pocket caliper, a curve-measuring wheel, and a bubble level. A row of holes along one arm turns it into a compass, which is a party trick I did not expect from a ruler. The hinge also stops at 45, 90, and 180 degrees. All of it comes to 2.2 ounces (63.3 g), a little more than a large egg.

Designer: MakerPi

Click Here to Buy Now: $99 $148 (33% off). Hurry, only 215/500 left! Raised over $140,000.

A titanium body with scales you can actually read

Most of the Tiruler 2.0 is Grade 5 titanium, the Ti-6Al-4V alloy aerospace engineers rely on, shaped into two folding arms. Brass scale plates add the warm gold you see against the gray metal. One arm reads metric and the other reads imperial by default, which ends the mental conversion game. All-metric and all-imperial versions are offered for people who live in one system. Titanium also resists corrosion, so a tool that rides in a pocket or a bag should wear well.

The scale markings are now chemically etched and filled with black ink. The original Tiruler laser-engraved its brass scales, and users found some marks hard to read once grime built up. MakerPi made the change after feedback on that first version. The result is crisp, high-contrast numbers that read well from different angles. It is a technique familiar from instrument dials, and I like seeing it on a pocket tool. A ruler you cannot read is a stick.

Angle stops, a curve wheel, and a caliper that reads to 0.1 mm

The pivot end of the Tiruler 2.0 handles angles and curves. A brass dial measures an angle and lets you draw it directly, with stops at 45, 90, and 180 degrees so common corners click into place. The same end works as a measuring wheel, where one full rotation equals 3.94 inches (100 mm). A click sounds each time the wheel passes zero. For anything longer, you count the clicks and add the current reading, which is old-school arithmetic that works fine on a bottle or a bike frame.

The pocket caliper slides out of an arm and reads down to 0.1 mm using a vernier-style scale. Pierre Vernier published that clever scale back in 1631, and it still works the same way. Outside measurements cover cylinders, bottle caps, rings, and model parts. New this generation are inside measurements, taken with two 1.5 mm pins across a range of 0.12 to 2.17 inches (3 to 55 mm). You add 3 mm to the brass scale reading, so 11 mm becomes 14 mm, a small tax that still beats a trip to the toolbox.

A magnetic pencil that doubles as a compass, plus a blade

The pencil sits in a magnetic slot and pulls out with no latch to fight. Its replaceable everlasting tip is water-resistant and needs no sharpening. Unscrew the top and a fine pin appears, which works as a SIM ejector, a toothpick, a tiny hole punch, or a pick for small parts. That same pin is the pivot for the compass function. Plant it, drop the pencil into one of the holes along the arm, and rotate the ruler around it, with the scale telling you the circle size. I love it when one small part gets two jobs.

The knife lives in its own magnetic slot, backed by an extra retention feature so it stays put when the tool gets shaken or carried around. It accepts standard #11 scalpel blades, so replacements are cheap and easy to find. Paper, cardstock, and tape are the intended targets. MakerPi says plainly that it does not replace a dedicated cutting tool, which I appreciate. Measuring, marking, and slicing along the same edge without setting anything down is the point.

Glow tubes, engraving, and what it costs

A bubble level is built in, handy for installation, positioning, and model making. Two mounting holes take tritium tubes or glass glow tubes, which makes the tool easy to spot in dim light. Tritium glows continuously without charging, while glass tubes charge under UV light and slowly fade. There is also an optional engraving area that takes up to 20 characters, ideal for a name or a mark. A genuine leather case is available as an add-on for protection and storage.

Early pricing for the Tiruler 2.0 starts at $99, against a planned retail price of $148. The default build pairs a metric arm with an imperial arm, and all-metric or all-imperial versions are available. Each unit includes the magnetic pencil and knife, while the leather case, glow tubes, and custom engraving are optional add-ons. MakerPi ships worldwide and import and export taxes are already baked into the price, so US buyers should not face a customs bill. Shipping is expected to begin in March 2027.

Click Here to Buy Now: $99 $148 (33% off). Hurry, only 215/500 left! Raised over $140,000.

The post This 9-in-1 folding titanium ruler can draw circles, slice paper, and eject your SIM card first appeared on Yanko Design.

Redmi just debuted an ultra-affordable $42 monitor arm that hides your cables too

Xiaomi is assembling your desk one cheap piece at a time. First came the monitors, from 24-inch office panels to 4K gaming screens. In July, the Mijia Monitor Light Bar 2 arrived to perch on top of them for about $39. Now Redmi, Xiaomi’s budget sub-brand, has launched the piece that holds the whole thing up, a monitor arm with a hidden cable channel for roughly $42. At this rate, a Xiaomi standing desk is probably already sitting in a spreadsheet somewhere.

The Redmi Monitor Arm went on sale October 12 on Xiaomi Youpin for ¥299 (about $42), and Xiaomi has not announced a US release. It holds screens up to 34 inches, and the body is 3mm aluminum alloy. Xiaomi’s pitch is that cables tuck inside the arm, so your desk shows a single post. A five-year replacement guarantee comes along for the ride, which is a lot of faith at this price. If you have ever fought a monitor arm and zip ties in the same evening, you can see the appeal.

A load range that starts at 4.2 pounds

Redmi rates the arm for 4.2 to 19.8 pounds (1.9 to 9 kg), and the low end is the interesting part. An arm tuned for a heavy screen will push a light one skyward, so a 1.9 kg floor suits the featherweight office panels Xiaomi itself sells. At the other end, 17173 notes a loaded 34-inch ultrawide lands around 8 kg, so the 9 kg ceiling has room. Anything heavier, or anything past 34 inches, needs a different arm. Check your panel’s spec sheet before you click buy.

The lift comes from a dual-spring design, with springs on both sides firing together so the force stays even through the whole 11.8 inches (30 cm) of height travel. Xiaomi says it survived 30,000 test cycles. Chinese outlet Kuai Keji worked that out to about 20 years of use at four adjustments a day, which is a lot of standing up and sitting down. The listing cites a Chinese utility model patent, a lighter registration than a full invention patent. Redmi adds a separate tilt-force adjustment at the VESA head to go after screen sag

Cable routing that hides the mess, mostly

Redmi’s renders show cables running through a channel beneath the arm and down the riser. Only the clamp stays visible on the desk. It echoes the trick behind Calvin Lien’s Console Desk concept, which hid its cabling inside the desk’s spine so the surface stayed clean. The arm adds reach to that job, with 17.1 inches (43.5 cm) of front-to-back travel and a 360-degree screen rotation. The promo shots still show a little cable curling out near the VESA plate, which is fair, because a moving screen needs slack somewhere.

Six years ago, Redmi’s first PC monitor, the Display 1A, launched with nothing to hide its cables, a gap a Polish review called out at the time. Concealed routing is now a headline feature on the company’s own product page. That tells you where desk setups have gone. A channel in the arm means the monitor’s cables follow one path instead of dangling in every direction. Redmi’s version is far simpler than a full desk rebuild, and it only has to live inside one arm.

The ¥299 price and China-only availability

The arm costs ¥299 in China (about $42) and went on sale October 12 through Xiaomi Youpin. The listing shows a struck-through ¥499, but Youpin’s fine print calls that a reference price, so read ¥299 as a launch price rather than a markdown. Notebookcheck points out that pricier ergonomic arms can run up to $350 in the US, which makes $42 look like a typo. A five-year replace-instead-of-repair guarantee comes with it, though the full terms are not spelled out on the page. The currency conversion is approximate.

Compatibility looks friendly, since the VESA plate takes the 75x75mm and 100x100mm patterns that most monitors use. That is the same pair CORSAIR’s Platform:6 desk specs for the arms it ships with, so most panels should line up. Xiaomi has not published a clamp thickness range, so measure your desk edge before you get excited. There is no word on a global release, but Xiaomi often sends its accessories abroad later, sometimes wearing the Xiaomi name. The part holding your screen up has never been the exciting purchase, which is exactly why a $42 version is worth watching.

 

The post Redmi just debuted an ultra-affordable $42 monitor arm that hides your cables too first appeared on Yanko Design.

CleanMyMac just made a Screen Cleaning Perfume for your MacBook that smells like a pine forest

Apple’s official answer to a smudgy MacBook screen is a $9 Polishing Cloth, which, to be fair, is ten bucks cheaper than the version everyone roasted in 2021. MacPaw has a more extravagant answer. The Ukrainian company behind CleanMyMac just revealed CleanMyMac Mist, its first physical product, a screen and keyboard cleaner dressed up as a bottle of designer fragrance. One spritz on a microfiber cloth is meant to lift the fingerprints and leave your laptop smelling like a frosty pine forest. Your candles, your hand soap and your car already have signature scents, so honestly, the MacBook was overdue.

MacPaw calls the scent Frosted Juniper, picked because juniper grows both in Ukraine, where the company was founded, and in California, where the Mac was born. That’s a little sentimental, and I’m completely here for it. The notes run from camphor, ozone and citrus up top to fir needle, cedar leaf and green apple at the base, and the brief was to smell clean without smelling like a cleaning product. Pole, a design and small-batch production studio in Ivano-Frankivsk, made the glass atomizer, its metal case, and a pink box loud enough to see from across the office. Only 100 bottles exist, and they’re up for grabs via a CleanMyMac Instagram and TikTok giveaway until October 23, so don’t go hunting for a price tag.

Designers: MacPaw & Pole

Every design choice here borrows from the perfume counter instead of the cleaning aisle. A slim glass atomizer sits inside a cylindrical metal case, and its silver-and-gray finish would sit happily next to any MacBook. The box flips the mood entirely, with a hot pink tray holding the Mist, a microfiber cloth, a small brush and a scent card, which is basically a perfume blotter for your laptop. The whole package is designed to live on your desk in plain view, far away from the Windex under the kitchen sink. Le Labo pulled a similar trick with its hand-cast concrete diffuser, treating a fragrance gadget as decor first.

Apple’s own cleaning guide warns against aerosol sprays, so the Mist uses a pump atomizer, and you spritz the cloth instead of the screen. That small habit change tackles a real problem, since one in three US Mac owners in MacPaw’s survey admitted to damaging their machine while cleaning it. The product site names the usual culprits: glass cleaners that strip anti-reflective coatings, paper towels that leave micro-scratches, and the hoodie sleeve that only feels like it’s doing something. Apple Stores reportedly keep their display units spotless with WHOOSH!, so dedicated screen formulas are nothing new. MacPaw’s twist is making the formula something you’d happily smell on your fingertips afterward, though nano-texture displays should still stick to Apple’s dry cloth.

As a longtime CleanMyMac user, I find the whole thing delightfully on the nose. The app launched in 2008, has racked up 29 million downloads sweeping caches, logs and leftover app files out of Macs, and MacPaw says it cleans a million machines a day. For 18 years, “clean” was a metaphor for digital housekeeping, and now the metaphor has a nozzle and a note pyramid. MacPaw handed the physical side to Pole, a design and production center in Ivano-Frankivsk with metal, wood, ceramics and biolab workshops under one roof. Pole specializes in runs of 1 to 500 units and built elements for Ukraine’s pavilion at Expo 2025 in Osaka, so a 100-bottle drop sits right in its comfort zone.

The Mist isn’t for sale, and the only way to get a bottle is a giveaway on CleanMyMac’s Instagram and TikTok that closes at 11:59 PM EST on October 23. MacPaw will pick 10 winners on Instagram and 5 on TikTok, so the odds are slim, but every entrant still gets a 20% CleanMyMac coupon. The full scent breakdown and entry details live at cleanmymacmist.com. Millions of Mac owners already trust MacPaw with the inside of their machines, and I suspect plenty of them would buy a refill to keep the outside smelling like a snowy forest. Frosted Juniper makes a great first edition, though I’m already lobbying for a cozy sandalwood one by December.

The post CleanMyMac just made a Screen Cleaning Perfume for your MacBook that smells like a pine forest first appeared on Yanko Design.