Tag Archives: numark

Numark’s DJ2GO2 Touch is made for aspiring DJs

Posted on by
Numark's controllers are ubiquitous in the world of professional DJing, and the company is hoping to get more amateurs in on the action with its DJ2GO2 Touch. The device easily fits in a backpack alongside a laptop, but it still packs cueing, looping...

Numark Mixtrack Edge ultra-portable DJ controller announced, we go hands-on (video)

Posted on by

Numark Edge ultraportable DJ controller announced, we go handson

Just when you thought Numark couldn't invent any more DJ controllers, it's done it again. This time it's MusikMesse at Frankfurt, with the little guy you see above -- the Mixtrack Edge. It's described as "ultra portable" and when you see how big it is -- roughly the size of an iPad -- we're inclined to agree with that. In fact, when you see the device cooped up in its protective case with the lid down, you'd be forgiven for thinking that's exactly what it was (a tablet). But, no... this is another attempt at forging a new DJ controller category. Numark's done small before (like the DJ2Go), but the Mixtrack Edge has a significant trick up its sleeve -- a built-in audio interface. This means no cable splitters, you instead plug headphones right in, and line your audio out to your speakers. Sound good? We went hands on to find out, so plug in after the break.

Gallery: Numark Edge hands-on

Filed under: ,

Comments

Numark NS7 II Serato DJ controller hands-on (video)

Posted on by

Numark NS7 II Serato DJ controller hands-on

Like buttons? Numark at NAMM evidently thinks they are this season's DJ must have. The latest bit of kit to get the manual-input makeover? Its NS7 II Serato DJ controller. The second iteration of its motorized-platter DJ tool lands augmented with 16 "MPC-style" pads. Of course, when you are part of the same corporation that also makes the MPC, swinging these sort of add-ons must be a little easier. Those pads will be assignable to a host of features (cues, loop, roll, sampler, and slicer) in the Serato DJ software (sadly not ready for a demo with the hardware at this time). Of course, the NS7 II is all MIDI compatible, so if your software of choice is something else, then you are free to map and a buse as you wish. That's not all, you might notice in the picture above that the pads have some jazzy colors going on. They are have RGB illumination which can be set and customized to your choice by MIDI data. It's not all about the pads though. Numark has also added touch functionality to a lot of the rotaries. So, if you have one set to control a filter, you can just tap the tip of the control to trigger it on / off. The last of the big news is that with the NS7 II, you can also control four virtual decks. A nice addition for the fast-fingered DJs out there. We ran into the device on the show floor and spent some time with it. Head past the break for more.

Gallery: Numark NS7 II hands-on

If you ever got your hands on the original NS7, you'll know that it is quite the machine. Big, heavy, covered in controls, and most famously, sporting fully motorized 7-inch platters. It's this curious mix of new and old methodology that pretty much sums up the Serato DJ software it is designed to work with. With the NS7 II, it's basically more of the same. The hardware is built like a tank, the platters feel authentic enough to bring back nostalgia (even if it's in smaller, 7-inch form). The MPC buttons look and feel great too. Intense mashing and finger / thumb abuse? These look more than capable at taking it by the bucket load. The color effect is pleasing to the eye. We're not sure how important it will be in real world application, but if you like to mark out your triggers and samples, this will let you do that. And what the heck, it just looks pretty sweet -- never a bad thing. As for the touch-enabled rotaries? Well, sadly we'll just have to imagine how they work, as there was no connected software for us to test them out. We're imagining it to be a handy feature, none the less. The same applies to the four deck functionality. We were unable to test it, but it's utilitarian enough that we welcome the addition. Each of the two hardware platters has a pair of buttons beneath it letting you switch between decks easily. These buttons are again, solid and firm, letting you get carried away without damaging your new pride and joy.

Prospective buyers will be pleased to know that as Numark has done before, the unit also contains a full independent mixer. This means you can plug in CDJs, turntables and more and bring them into your set without problem. That mixer is also somewhat larger this time around, thanks to the extra two channels it sports for the four decks. This also serves to enhance its chunky, no messin' look and feel. We'd love to have spent some time actually using it, but alas it wasn't to be. We did manage to grab some video of the hardware though, so head south to take a look of that, while we patiently wait for price and availability information.

Billy Steele contributed to this report.

Filed under:

Comments

Numark iDJ Live II DJ controller hands-on (video)

Posted on by

Numark iDJ Live II DJ controller hands-on

If there's one company that comprehensively caters to the entry-level and intermediate DJ, there's a good chance it's Numark. While the firm has released a whole bunch of stuff at NAMM this year, perhaps its most mainstream offering is the iDJ Live II. If you remember the original, it was a lightweight controller (both physically, and metaphorically) designed for use with Djay on iOS. This time around the little fella gets a redesign, and a few functionality tweaks. Most notable, is that while the first iteration only gave you the option of iOS connectivity -- via the 30-pin adaptor -- this time you have the choice of Lightning, 30-pin, or straight up USB. Thus, you can now bring the iDJ Live II out to work with your Mac or PC, too. Once again, it's built with Algoriddim's Djay in mind, be it the desktop or iOS version, and we got our hands on it to take it for a spin. Head past the break for the lowdown.

Gallery: Numark iDJ Live II hands-on

First things first. This is very much a fun, consumer product. It would be unfair to call it an accessory, but it's definitely meant for casual use at parties etc. The unit itself is very light, made entirely of plastic, and feels very different to the heavier DJ controllers you might be used to. The iDJ Live II, however, does look much better than the first iteration, with the slightly squared design and the lower-profile platters at least making it look a little less toy-like than before. The plastic finish still feels the same, as does the action and resistance of the platters, knobs and faders (which is serviceable). The controls available give you everything you need to perform all the mixing basics, with high and low-frequency EQ, channel volume control, a crossfader, and even rudimentary scratching (though it really is more of a novelty). If you've ever used Djay for any amount of time though, you'll know that this is plenty enough to get a set going, and having the physical controller there just makes it all that more enjoyable / easy. While purists and old hands might see products such as these as over simplified, the ease of use, and broad appeal makes them ideal for the curious, and that can only be a good thing. Sadly there is no word on price or availability at this time, but we'd be surprised if it wasn't comfortably under $100 when it does finally make its way onto shelves. Check the video below for the hardware tour.

Billy Steele contributed to this report.

Filed under: ,

Comments

Numark Orbit wireless MIDI DJ controller hands-on (video)

Posted on by

Numark Orbit wireless MIDI DJ controller hands-on

NAMM is yet to open its doors fully, but we managed to sneak a hands-on with the freshly announced Orbit DJ controller from Numark at the press preview. As you can see, the wireless device looks like a game controller that crashed into a disco -- it's certainly distinctive. This is no accident, and the design is purposely built with quick and easy button access in mind, letting DJs (and any MIDI-based performers) step out from behind the DJ booth, and onto the stage. The portability of the Orbit is further amplified by the inclusion of a clip-mount on the rear, as well as lanyard-style strap hoops. It feels light yet solid, and the soft-touch finish means your hands won't get tired gripping this thing in the throws of a drum-pad solo. The name Orbit also evidently refers -- at least in part -- to the near-symmetrical design which lets you hold it either way with the same comfortable access to those brightly-lit, colorful controls. Those pads feel smooth, yet tactile -- and most importantly -- responsive. Tap past the break for more impressions.

Gallery: Numark Orbit hands-on

That central dial you see in the middle is designed to be used as a multi-purpose knob, and is big enough for you to comfortably thumb it, while still reaching the side controls. There are four buttons which can be assigned as "virtual rotaries," and once selected, spin that wheel to modulate whatever you have it assigned to (filters, reverb amount etc.). The other set of four buttons let you expand those 16 pads out to a potential 64, so if you want one bank for controlling lights, one for sample triggering, and another for hot-cues, you can do this all from the one small device. It's not just the external controls that make this interesting, the internal two-axis accelerometer, which can be assigned to parameters of choice, will definitely add a new dimension to what's possible. Sadly we weren't able to try this out, but already we're thinking of some interesting uses. There's a micro-USB port on one side for charging and tethered use. We only had a short amount of time with the Orbit, but already we could see its potential for enhancing performance. It's not meant to replace anything in your existing set-up, rather to enhance it, and given the flexibility of MIDI, this could mean a whole host of interesting uses. The crowd of folk waiting to get a closer look behind us certainly showed that it's piquing people's interest. Set to be released in spring for a reasonable $100, this looks like a promising start to 2013 for Numark. Check the video tour below for more.

Billy Steele contributed to this report.

Filed under: ,

Comments

Numark refreshes iDJ Live, NS7, Mixtrack Pro DJ controllers, intros new Orbit wireless option

Posted on by

Numark refreshes iDJ Live, NS7, Mixtrack Pro DJ controllers, intros new Orbit wireless option

Many a DJ's first footsteps into the craft has started with a box labeled 'Numark.' At This year's Winter NAMM the prolific firm has updated three of it's existing controllers, and added a new hand-held wireless line -- called Orbit -- into (ahem) the mix. First up for the refresh treatment is the sequel to the iDJ Live iPad DJ controller -- the iDJ Live II (of course). What's new? Well this time around there's USB connectivity, which opens the functionality to a much broader range of software. The design has also been revised, with the platters most notably being much lower profile. Controls-wise, it's still back to basics with the essentials covered (EQ, crossfader etc), but the lack of onboard audio interface means you're still relying on an audio splitter for cueing. If you need a little more control, or a dedicated audio interface, the second revision on the list -- the Mixtrack Pro II -- might be more up your street. Head past the break to read more.

Once again the design has been given a makeover, plus there's 16 drum pads, hot cues, back-lit platters and all the usual effects -- there's also Serato DJ Intro software bundled in to get you going. The Mixtrack Pro II will cost $299 when it launches sometime this month. Last of the existing hardware revisions goes to Numark's popular motorized-platter controller the NS7, with the NS7 II. This is aimed at those DJs who like to trick their sets out a little bit, and this is made all the easier by the inclusion of 16 MPC-style pads, borrowed from the sister brand Akai's famous sample player line. The pads also have MIDI-assignable RGB backlights, letting you get creative with the color-scheme. The 3,600 'tick' resolution, plus slipmats definitely make this the digital-turntablist's choice (if that's a thing) from the new recruits.

Last, and possibly most interestingly, is the entirely new Orbit controller. This -- so claims Numark -- is the world's first wireless handheld DJ controller. The game-controller-esque design evidently hopes to bridge the gap between DJing and performance. The low-latency 2.5GHz wireless will bring the artist closer to the audience, for sure, but if you're a little more traditional, or like a longer, power heavy performance, you can still cable-up. There's four selectable banks of 16 pads (eight either side) plus four virtual knobs and a control wheel for adjusting parameters in real time. If that's all a little vanilla, there's also a two-axis accelerometer which can be set to control two different parameters (fader frequency or volume, for example) which is activated by shoulder buttons -- ideal for those extra-active performers -- and reminiscent of controllers we've seen before. For more info head over to the PRs, or check our ongoing NAMM coverage for hands-ons as we find things.

Show full PR text

NUMARK INTRODUCES iDJ LIVE II

iDJ Live II offers expanded mixing capability and an all-new design.

Cumberland, R.I. (January 24, 2013) - Numark, the world's leading manufacturer of DJ technology, announces iDJ Live II, a new mobile DJ controller that offers versatile control over a wide variety of computer-based and mobile DJ platforms. Numark will unveil iDJ Live II at Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

An updated and enhanced version of Numark's iDJ Live controller, iDJ Live II features an updated low-profile design and USB connectivity, allowing it to perform with both laptop-based and mobile DJ platforms. iDJ Live II features a standard layout of DJ controls, including a crossfader, EQ knobs, and capacitive touch-activated platters. The design of iDJ Live II has also been slimmed down with redesigned platters that are now illuminated and low-profile. A headphone/speaker splitter cable is also included.

"iDJ Live II enhances and builds upon our original vision for iDJ Live-give anyone and everyone real DJing capability in a compact, comprehensive, and fun package," said Chris Roman, Numark Product Manager.

Numark will display and demo iDJ Live II at Booth 6700 at the 2013 NAMM show.


Show full PR text

NUMARK UPDATES AND IMPROVES THE WORLD'S #1 DJ CONTROLLER

Mixtrack Pro II unveiled at NAMM 2013 and available in stores immediately

Cumberland, R.I. (January 24, 2013) - Numark, the world's leading manufacturer of DJ technology, announces Mixtrack Pro II, an enhanced and updated version of Mixtrack Pro, the world's best-selling DJ controller. Numark will exhibit Mixtrack Pro II at Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

Mixtrack Pro II features a new streamlined design and a new expanded layout of professional controls, including 16 backlit multifunction drum pads and illuminated touch-activated platters. Hot cues, looping, and effects controls are all onboard, along with a built-in professional DJ audio interface. Building upon Numark's longstanding partnership with Serato(R), Mixtrack Pro II comes with Serato DJ Intro. DJs can also easily use Mixtrack Pro II with most popular DJ software, and it also comes pre-mapped for an optional upgrade to Serato DJ, the latest state-of-the-art professional software from Serato. Serato DJ includes a wide range of all-new features and capabilities, including stunning new effects powered by iZotope(R), ultra-flexible and intuitive MIDI mapping, and the ability to set and trigger up to eight cue points.

"When we first released Mixtrack Pro, there was nothing else like it-it set the bar and gave DJs and aspiring DJs everywhere truly professional capabilities," said Chris Roman, Numark Product Manager. "Mixtrack Pro II is the next step of that evolution-the bar just got even higher."

Numark will also be showing Mixtrack II, an all-new version of Mixtrack, which shares all of the same professional updates received by Mixtrack Pro II.

Mixtrack Pro II will be available in stores in January 2013 with an estimated street price of $299.


Show full PR text

NUMARK ONCE AGAIN DEMOLISHES THE BOUNDARIES OF DJING WITH THE INTRODUCTION OF NS7 II

Incorporating exclusive technology from Akai Professional, NS7 II offers DJs the most responsive control surface ever created with virtually every inch filled with advanced touch-sensitive controls.

Cumberland, R.I. (January 24, 2013) - Numark, the world's leading manufacturer of DJ technology, announces NS7 II, a dramatically enhanced and updated version of the industry's most advanced and best-selling motorized DJ controller, NS7. NS7 II features four channels, 16 backlit RGB velocity-sensitive MPC(R) pads from Akai Professional, expanded effects controls-including a full array of capacitive touch-activated knobs and filters-and the most comprehensive integration for Serato DJ available. Numark will exhibit and demo NS7 II for the first time at Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

For more than 20 years, Numark has set the pace in the world of digital DJing, empowering DJs with cutting-edge technology that has continually advanced the art form. In 2007, Numark and Serato(R) released NS7, a controller that blends different eras of DJing so completely it makes them virtually indistinguishable from each other. Since then, the powerful experience offered by NS7 has defined the top tier of DJ performance, setting the standard by which all other controllers are judged.

Now, with NS7 II, Numark is pushing the modern DJ's performance capability even further, incorporating iconic technology from Akai Professional, the world leader in music production technology and creator of the legendary MPC. NS7 II's 16 MPC pads can be instantly assigned to control five dynamic performance features in Serato DJ: Cues, Loop, Roll, Sampler, and Slicer. In addition, each pad features RGB illumination, allowing for a virtually endless amount of color variations assignable via MIDI. Vinyl platter control has never felt more familiar with its high- and low-torque motorized platters with real slip mats and real vinyl sitting on 3,600 ticks of resolution. NS7 II's four-channel mixer works with or without a computer and includes a full array of external device inputs. Capacitive touch-activated filter, gain, EQ, and effects knobs are other features incorporated from Akai Professional, which turn the knobs themselves into control surfaces. DJs can use them for instant-on parameter control, blending effects, and instant frequency kills. "NS7 II is an interactive playground," said Chris Roman, Numark Product Manager. "It's built to squeeze every ounce of capability out of Serato DJ and push your creative limits. It's born to perform and to empower DJs with maximum live-performance creative capability."

NS7 II will be unveiled at Booth 6700 at the 2013 NAMM show on January 24th.


Show full PR text

NUMARK INTRODUCES THE WORLD'S FIRST WIRELESS HANDHELD DJ CONTROLLER

Orbit offers DJs unprecedented wireless control with 16 backlit pads, large aluminum control wheel, built-in 2-axis accelerometer, belt clip, and 8 hours of personality on a single charge.

Cumberland, R.I. (January 24, 2013) - Numark, the world's leading manufacturer of DJ technology, introduces Orbit, a first-of-its-kind wireless handheld DJ performance controller. Numark will unveil Orbit at and around Booth 6700 at the 2013 NAMM show, January 24-27 in Anaheim, California.

Numark's Orbit is the next step in the evolution of the performing DJ. Made to be held in the hands, strapped to your body using its built-in clip, or placed on the table, Orbit packs an unheard-of amount of control into an ergonomic game-controller-on-steroids design, which has every inch, inside and out, tailor-made for live performance. Orbit can be used wired via the included USB cable, which also charges it, or wireless using 2.4 GHz ultra-low-latency connectivity. Orbit features 4 selectable banks of 16 backlit pads, 8 on each side, for adding and blending effects, launching hot cues and samples, and more. Located in the center of Orbit are 4 bank selection buttons, 4 virtual knobs, and a large aluminum-faced touch-sensitive control wheel, which controls the selected virtual knob for instantly tweaking effects and filters.

"If you want to be a serious DJ these days, you need the guts and the gear to get out on the stage and perform," said Chris Roman, Numark Product Manager. "Orbit embraces that reality to its core, empowering DJs with performance capabilities that will need to be seen and experienced to be believed. It's intuitive, operating like an extension of the DJ-not to mention it's the most fun you'll ever have on stage."

Orbit's live-performance design extends even to the inside of the device, where it has an embedded 2-axis accelerometer, which can be assigned to 2 different parameters per bank and activated instantly via 2 shoulder buttons. All of Orbit's controls are fully mappable, so DJs will be able to customize their settings for effects control, transport control, volume control, or any other MIDI parameter. Numark will demonstrate Orbit for the first time at Booth 6700 at the 2013 NAMM show.

Filed under:

Comments