Control4 delivers home automation Starter Kit for under $1,000 including installation, we go hands-on

Posted on 28/06/2012 by Zach Honig

Replacing a house full of switches and dials with a single remote seems a desirable proposition, but less-than-intuitive setup processes and fees that run far into the thousands make a disconnected home the only option for some. Like other home automation system manufacturers, Control4 has a bounty of offerings that can run up pricing into that out-of-reach range, but if you're looking to adjust audio and video in a single room, the new Starter Kit should get you going for just shy of a grand, including installation. That price includes a HC-250 Controller, which delivers IR control for up to eight components (via splitters connected to the four IR ports on the rear), serial control for up to two receivers or other systems and IP control for an unlimited number of devices. There's also an SR-250 ZigBee remote in the box, which offers full control through a television interface (HDMI and component outputs can be found on the HC-250's rear). You can also have full access through a variety of add-ons, including a $999 7-inch in-wall touchscreen with camera, a portable version for the same price, or any Android, iOS or Mac device -- access licenses for smartphones, tablets and computers run $199 each, or $499 to cover the entire home.

The Starter Kit can enable control of a single room, which may be fine for some users -- to add additional home theater setups you can bring on more HC-250s at $599 a pop. There's also an option to add ZigBee lighting controls ($129 per switch), ZigBee door locks ($150 to $350) or a door intercom unit with camera ($799). All-in, outfitting a large home can be quite pricey, and the Starter Kit is designed to get folks in the door, rather than to deliver a complete solution. We tested the controller with a TV, audio system, a pair of lights on two zones, the door intercom and a deadbolt, and all performed seamlessly without an hiccups. We also took a look at the intuitive drag-and-drop PC-based interface, which owners can use to change macros and add media. Introducing new components to the rig will require a dealer service call (or remote access, if you're just trying to loop in something like a NAS to serve up content). The Control4 Starter Kit is available through third-party dealers beginning today, including Magnolia Home Theater in select Best Buy stores (in that case, Geek Squad will handle the install). That sub-$1,000 figure factors in two hours of labor, and may climb a bit higher depending on dealer rates. Still, if you're just looking to get your feet wet, this seems to be a solid solution. Thumb through the gallery below for a closer look at the components and interface.

Gallery: Control4 Starter Kit hands-on

Continue reading Control4 delivers home automation Starter Kit for under $1,000 including installation, we go hands-on

Control4 delivers home automation Starter Kit for under $1,000 including installation, we go hands-on originally appeared on Engadget on Thu, 28 Jun 2012 11:33:00 EDT. Please see our terms for use of feeds.

Permalink | | Email this | Comments

Sony’s Action Cam prototype is incredibly small, we go fingers-on at CE Week in NYC

Posted on 27/06/2012 by Zach Honig

CE Week isn't typically a venue for major product introductions, then again neither is Sony's blog. Last night, we got a sneak peek at the company's new Action Cam on the aforementioned site, and this morning the Japanese manufacturer dropped the black curtain on what appears to be the very same prototypes used in yesterday's tease. We almost missed it at Sony's pint-sized booth at the annual week-long CEA event in New York City -- the camera, which has yet to get an official name and model number assignment from Tokyo, is massively smaller than yesterday's snaps may have implied. The adventure shooter is hidden behind glass, but we did manage to pull it out for a brief inspection, and boy is it tiny.

A variety of mounts were on hand to demonstrate the shooter's versatility, including a handlebar attachment, helmet holster and some sort of plastic enclosure that could presumably be used to shield the Action Cam from underwater hazards, though Sony declined to confirm. Specification details are also quite spotty at the moment, but we were able to confirm that there will be an Exmor R CMOS image sensor and a wide-angle Carl Zeiss Tessar lens on board. Things seem to be quite limited on the controls front, with simple navigation buttons, a Start/Stop toggle, a tiny LCD and stereo mics up front representing the entire bounty of I/O offerings. There also appears to be SD and Memory Stick storage on board, based on familiar logos printed on the jet-black housing. For now, that's all she wrote -- we expect more details as we approach the Action Cam's official launch in the fall. Flip through the gallery below for a closer look.

Gallery: Sony Action Cam prototype hands-on

Sony's Action Cam prototype is incredibly small, we go fingers-on at CE Week in NYC originally appeared on Engadget on Wed, 27 Jun 2012 10:41:00 EDT. Please see our terms for use of feeds.

Permalink | | Email this | Comments

Matrix One is a $99 ICS tablet that could ship to retailers next month… but probably won’t (hands-on)

Posted on 26/06/2012 by Zach Honig

From Barcelona to Hanover to Vegas and Taipei, we've seen our fair share of low-end Android tablets, some of which actually offer a bit of promise, and get it done for under 200 bucks. And while even a few sub-$100 models have littered the exhibition hall floors, they're most often mere vaporware, never actually making their way to US and European retailers and online shops. The Matrix One, for its part, could actually get the nod of approval from big box execs, however -- according to company reps, at least. And it wouldn't be a half-bad option at $99, shipping with Android 4.0.3, a 2-megapixel webcam, 1.5GHz Cortex A8 processor and an 800 x 480-pixel 7-inch capacitive display. Those specs also make their way to a nearly identical $149 flavor, which ups its budget counterpart's 512MB RAM and 4 gigs of storage to 1GB and 16GB, respectively, while keeping the other components intact.

While that display won't best any brand-name slab on the market, it's certainly usable, even in bright sunlight, as we experienced today at CE Week in New York City. The tablet performed just fine during our quick demo, which included navigating through some menus and watching a few HD video clips. The built-in speaker on the rear won't come close to filling a room (or even a noisy car, perhaps), but a headphone jack will let movie fans and youngsters alike appreciate content a bit more, especially if traditional tablets are priced out of reach. There's also an HDMI port for outputting 1080p video to a TV, along with one full-size USB port, a mini-USB connector for syncing and updates, a power port and a micro-SD card slot, for adding up to 32 gigs of extra storage.

You'll also find a built-in mic and a two-megapixel webcam (no rear-facing shooter, however). All in all, the 11.1-ounce package is quite polished, especially given the price. We won't likely be adding the Matrix One to our personal collection, but if a $99 tablet is on your must-have list, this wouldn't be a bad choice -- let's just hope it does indeed pop up in stores, perhaps as soon as the tablet's ready to ship at the end of next month. There's a gallery below if you'd care to take a closer look, and do jump past the break as well -- that's where you'll find our hands-on video, with a lively Manhattan soundscape to boot.

Gallery: Matrix One 7-inch ICS tablet hands-on