Bubble Blowing R2-D2

bubble blowing r2d2
We made our annual pilgrimage to the International Toy Fair this year at New York City’s Javits Center and found a few cool new items for you to get a first glimpse of. As I’m sure you’re aware, with the coming Star Wars moving slated for December (that would be The Force Awakens for anyone living in a bubble), Star Wars items are projected to be hot. They always are anyway. And speaking of living in a bubble, we spotted this sweet bubble blowing R2-D2.
bubble r2
This thing is pretty substantially sized- close to 2 feet tall by our estimations. Fill it up with bubble solutions and let the good times pop. R2 put out a rapid stream of non-stop bubbles, a pretty impressive amount actually. It lights up and makes sounds too- his trademark bleeps and bloops. On his front there are a few different settings:
r2 bubble closeup
You can choose straight, oscillate, or random. Let’s get a reverse angle peek at that bubble blowing droid, shall we?
r2d2 blowing bubbles
Like it? Well you’ll have to wait. The R2-D2 Bubble Machine is being produced by Imperial Toy (appropriately named, sort of?) and will be released sometime this Fall.

Bubble Blowing R2-D2
Check out our Craziest Gadgets Shop for unique gifts!

R/C Bubble Blowing Helicopter

bubble blowing copter e1367260132185 R/C Bubble Blowing Helicopter
It’s the R/C helicopter that shoots bubbles! The Bubblecopter R/C Bubble Blowing Helicopter is a 3.5 channel co-axial helicopter with a built-in gyro for smooth handling. And it shoots out bubbles! Hover over your target and it’s bombs…err bubbles away!
bubble copter blowing R/C Bubble Blowing Helicopter
Now that’s a great bubble delivery system. You can use the remote control from up 32 feet away. The copter flies for 5-7 minutes on a 40-50 minute charge (which is about average for these type of toys actually). Includes USB charging cable and bubble solution.

buy now R/C Bubble Blowing Helicopter

R/C Bubble Blowing Helicopter

Bubble Outdoor Room: You Could Just Use a Tent

The weather can be such a pain sometimes. One minute it’s warm and sunny out, the next it’s raining cats and dogs.

Normally, I don’t mind, but it becomes a problem if I’m heading out to meet up with friends or attend some sort of outdoor gathering.

BubbleHowever, international network City Mine(d) came up with a concept called ‘Bubble’ that should solve this problem. It’s a huge, inflatable, transparent plastic bubble that can be set up in public places so that whatever meetings or events can go on as planned, even in bad weather.

The Bubble has already been used successfully in Brussels, London and Barcelona to host events and festivals.

Bubble1

The makers explain the concept of Bubble:

The bubble is a large translucent bag the size of a basketball (50 by 20 feet) made of polyethylene greenhouse film and is inflated with a small fan. It takes less than an hour to put it up, and can stay up as long as there is electricity supply.

What they don’t explain is how they prevent those inside the bubble from asphyxiating.

[via Pop Up City]

Colloidal Display uses soap bubbles, ultrasonic waves to form a projection screen (hands-on video)

Colloidal Display uses soap bubbles, ultrasonic waves to form a projection screen handson video

If you've ever been to an amusement park, you may have noticed ride designers using some non-traditional platforms as projection screens -- the most common example being a steady stream of artificial fog. Projecting onto transparent substances is a different story, however, which made this latest technique a bit baffling to say the least. Colloidal Display, developed by Yoichi Ochiai, Alexis Oyama and Keisuke Toyoshima, uses bubbles as an incredibly thin projection "screen," regulating the substance's properties, such as reflectance, using ultrasonic sound waves from a nearby speaker. The bubble liquid is made from a mixture of sugar, glycerin, soap, surfactant, water and milk, which the designers say is not easily popped. Still, during their SIGGRAPH demo, a motor dunked the wands in the solution and replaced the bubble every few seconds.

A standard projector directed at the bubble creates an image, which appears to be floating in the air. And, because the bubbles are transparent, they can be stacked to simulate a 3D image. You can also use the same display to project completely different images that fade in and out of view depending on your angle relative to the bubble. There is a tremendous amount of distortion, however, because the screen used is a liquid that remains in a fluid state. Because of the requirement to constantly refresh the bubbles, and the unstable nature of the screen itself, the project, which is merely a proof of concept, wouldn't be implemented without significant modification. Ultimately, the designers hope to create a film that offers similar transparent properties but with a more solid, permanent composition. For now, you can sneak a peek of the first iteration in our hands-on video after the break.

Continue reading Colloidal Display uses soap bubbles, ultrasonic waves to form a projection screen (hands-on video)

Filed under:

Colloidal Display uses soap bubbles, ultrasonic waves to form a projection screen (hands-on video) originally appeared on Engadget on Fri, 10 Aug 2012 12:24:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceYoichi Ochiai  | Email this | Comments

University of Tokyo builds a soap bubble 3D screen, guarantees your display stays squeaky clean (video)

University of Tokyo builds a soap bubble 3D screen, guarantees your display stays squeaky clean video

There are waterfall screens, but what if you'd like your display to be a little more... pristine? Researchers at the University of Tokyo have developed a display that hits soap bubbles with ultrasonic sound to change the surface. At a minimum, it can change how light glances off the soap film to produce the image. It gets truly creative when taking advantage of the soap's properties: a single screen is enough to alter the texture of a 2D image, and multiple screens in tandem can create what amounts to a slightly sticky hologram. As the soap is made out of sturdy colloids rather than the easily-burst mixture we all knew as kids, users won't have to worry about an overly touch-happy colleague popping a business presentation. There's a video preview of the technology after the jump; we're promised a closer look at the technology during the SIGGRAPH expo in August, but we don't yet know how many years it will take to find sudsy screens in the wild.

Continue reading University of Tokyo builds a soap bubble 3D screen, guarantees your display stays squeaky clean (video)

University of Tokyo builds a soap bubble 3D screen, guarantees your display stays squeaky clean (video) originally appeared on Engadget on Fri, 29 Jun 2012 20:58:00 EDT. Please see our terms for use of feeds.

Permalink   |  sourceNew Scientist  | Email this | Comments

Hotels Let You Sleep In Your Own Bubble in the Woods

Some people keep to themselves so much, that others describe them as living in their own “worlds” or “bubbles.” But you don’t have to be an introvert to actually live in a literal bubble in one of the two hotels that offer plastic rooms in France: the Attrap’Rêves and Sky River.

Attrap’RêvesThe bubble rooms were a concept by Pierre Stéphane, who wanted to come up with an eco-friendly space that didn’t cause any permanent changes to the environment once the bubble houses were folded up.

Attrap’Rêves1

Each of the bubbles are small and cozy. The rooms are 13 feet in diameter, with some bubbles being completely transparent while the ones that are half-opaque offer more privacy.

These hotels are going right on my list of places to visit before I die (or get too old to enjoy stuff like this.)

[via Knstrct]