This electric guitar is a MIDI controller that turns you into a music wizard

You’ll still need musical knowledge and skill, of course, but you might make other things you have some superpowers with this cool electric guitar.

Not everyone can play more than two or more instruments, but many musically skilled people can control electronic instruments without actually knowing how to use the real things. There are going to be some differences, of course, but there is a serious and professional field of music that involves these electric and electronic soundscapes. Most of these are operated with MIDI controllers, devices that geeky boards filled with buttons and sliders or, at the very best, an unassuming keyboard. The Ni28, in contrast, looks more like a very stylish and cool electric guitar, and using it will probably make you look like some music god that can produce all kinds of music and sounds with something that looks like the skeleton of a guitar.

Designer: Joris Wegner

MIDI controllers often need two kinds of controls. One is for toggling certain settings or firing off some actions, while another set of controls maps to pitches like notes on a scale. That’s why most MIDI controllers take the form of keyboards with additional buttons, sliders, and switches because these more easily translate to the kind of things that the controller needs to communicate with. It doesn’t always have to be a keyboard, though, and sometimes rocking out with a guitar can sometimes have more impact, especially when performing on stage.

The Ni28 Electronic Guitar does exactly that and could give the player the look and the feeling of being a rockstar god. Instead of strings and frets, however, the entire neck of the guitar has a matrix of nickel-plated (hence the name) brass plates that can activate nodes when touched. Unlike with a typical stringed instrument like a guitar, you don’t need to exert much pressure to cause an activation. You can bridge two adjacent plates, or you can lightly press one plate on the neck and then touch the “string” on the waist of the guitar to have the same effect.

This design has quite a few advantages. For one, you don’t need muscle memory to play music like on a regular guitar, though you do need to remember which frets do which. You don’t need to strain your fingers either because a gentle tap is all that’s required to activate a plate. This makes it easier to use even compared with a keyboard where you do still have to exert some force to press down on a key. Your fingers and hands can just dance over the guitar, making it look like you’re producing music with magical gestures.

There’s also an advantage to how such a guitar can be physically designed since all the electronics are confined inside the neck of the guitar. The body itself can simply be a frame or skeleton, or it can be swapped out for any other design at any given moment. It has absolutely no effect on the output or performance since there are no acoustics to mind, so you can focus more on ergonomics and appearances that will be critical for an impressive stage performance.

The post This electric guitar is a MIDI controller that turns you into a music wizard first appeared on Yanko Design.

BREEZE Guitar Amp also works as a modern minimalist instrument stand

BREEZE Guitar Amp Design

The pandemic has brought out the best and worst in people. Several hobbies have been started to occupy our minds during those boring days at home. Being locked down for many months can drive anyone crazy so like many people around the world, you have probably discovered new skills.

Many people have learned how to bake and cook. Others have started gardening or a workout routine. Many people discovered they have talents in dancing (thank you, Tiktok!), singing, or playing an instrument. If you’re one of those many who learned how to play the guitar, you may have gotten yourself a nice guitar already. But have you bought an amplifier yet? If your answer is no, then you may start checking out what’s available out there.

Designer: JOOM DESIGN and Weekend-works

BREEZE Guitar Amp

We’re hoping someday this BREEZE Guitar Amp concept by JOOM DESIGN and Weekend-works will become a reality. We like the idea of a light and compact amplifier you can easily bring anywhere. However, it’s more of a personal indoor guitar amp. It may be good enough for entertainment during house parties or when you simply want to jam with your family and friends.

The BREEZE Guitar Amp is designed with a mix of metal, marble, and fabric. The metal is found on the main amplifier’s body while a marble platform or base holds it. If it’s marble, we’re guessing it will be a bit heavy. A fabric is used as a cover of the speaker and appears to be ready in different colors. Unlike the usual guitar amplifier, this one looks stylish like most speakers released in the market.

BREEZE Guitar Amp Concept

The BREEZE guitar amp is for the home only. It’s not something for professional use or for paying gigs but it may be good to use if you simply want to let your music be heard by the people around you. The concept product also doubles as a guitar stand, thanks to the two feet and legs that can hold the instrument.

BREEZE Guitar Amp Concept Design

The main amplifier has a round shape and is ready to give a fuller volume. Compared to the usual square amplifiers, the circle amp appears to be minimalist and modern. It comes with a separate controller where you can control the volume, bass, treble, gain, and effects. You can hang the guitar amplifier when not in use and it will look like a round speaker. Now it may be better if it can also work as a Bluetooth speaker.

The amp features a versatile design and is a stylish space-saver. It can house your precious guitar when you’re done practicing those guitar scales you’ve been wanting to perfect. When not in use, it can also serve as a nice-looking home decor.

BREEZE Guitar Amp Sketches

BREEZE Guitar Amp Concept Details

The post BREEZE Guitar Amp also works as a modern minimalist instrument stand first appeared on Yanko Design.

The Hydra: A Triple-Neck Steampunk Guitar By Steve Vai

The brainchild of famed guitarist Steve Vai, the Hydra is a triple-neck steampunk-styled guitar that combines four different instruments: a fretless 12-string guitar, a half-fretless bass, a 7-string guitar, and a harp (seen at the bottom). Following Vai’s concept, the instrument was designed by Moti Kashiuchi and built by Ibanez Japan’s Kazuya Kuroki. There’s no doubt in my mind if you play the right chords on that thing, you can summon a dragon.

The idea for the guitar was inspired by a song on Vai’s new album ‘Inviolate’ called ‘Teeth of the Hydra.’ Each part of the instrument can be played independently of the others, with its own switches, mixers, and effects. Can you imagine how powerful it must feel to wield this thing on stage? Now I can see why they call guitars axes, and it’s not because you can use them to chop wood. I learned that the hard, expensive way.

The video tour of the instrument highlights a lot of the guitar’s customization and effect options, including a “seducer” effect for the harp. Personally, I would just leave that on all the time until I found myself with more groupies than I know what to do with. Although, if I’m being completely honest, even one groupie would be more than I know what to do with.

[via Laughing Squid]

These Electric Guitar Scissors Are Ready for Shredding

Are you an electric guitar player? Do you like cutting things? Well, for those of you who answered an emphatic ‘yes’ to both, there are the Seki Sound electric guitar scissors. Made by Nikken Cutlery in Seki, Gifu prefecture, Japan (an area known for its history of forging samurai swords), they’re the perfect scissors to display in the office supply caddy on your desk to let everyone know you’d rather be jamming.

The scissors, already fully funded on Japanese crowdfunding site Makuake, feature a plastic headstock that doubles as a safety cap to prevent accidental stabbings and a display stand similar to an actual electric guitar. Available in black, red, blue, and white, I can’t wait to smash a pair on stage while the audience grows increasingly confused and begins to demand their money back.

Now all you need is a drum set tape dispenser, bass guitar stapler, and a synthesizer paperclip organizer, and you’ve got yourself a whole office supply band! I think I’m going to name mine the ‘The Part Timers’ or ‘Cubicle Cowboys’ and perform daily during my lunch break, much to the annoyance of all my coworkers.

[via JapanToday]

You’ve heard of Modular Synthesizers, but wait till you check out this Modular Electric Guitar…





Guitars are like pizzas. They come in different shapes and styles, and you’re never satisfied with just one. Just within the domain of electric guitars, you’ve got the Stratocaster, the Telecaster, the Les Paul, the Jazzmaster, and a hundred others, designed and crafted with a specific persona – defined by their body design and their sound. The tragedy of electric guitars has always been that you need to buy different guitars for those different sounds… although the folks at Reddick Guitars may have a solution – Modularity.

A lot of times the word Modular gets used as a catchword or a gimmick (most notably in Architecture and Tech), but what the Reddick Voyager does is low-key genius. Electric guitars work when the vibrating metal strings create fluctuations in the magnetic fields of the pickups on the guitars. Different electric guitars come with different pickups placed at various different locations to create their signature sound (a Stratocaster uses 3 single-coil pickups while the Les Paul uses 2 humbucker pickups)… so Reddick decided to just create a guitar with modular pickup blocks that you could swap in or swap out. The video above showcases the Reddick Voyager in action, as the demonstrater hot-swaps modules in the middle of playing to show you how different they sound.

Swapping the pickup modules is just about as easy as swapping cassettes in a cassette player (if you’re old enough to remember those), making it convenient to switch modules mid-concert. The Voyager comes with 6 interchangeable modules, modeling the Telecaster, the Les Paul, the SSS Stratocaster, among other popular layouts. The modules clip right into the central cavity in the Voyager, and can be removed by gripping them using the hole at the back. The base of the guitar features a detachable module too, with interchangeable controls that allow you to get the best of your jamming experience. Sadly though, while you can swap out modules on the Voyager to dramatically change its sound, you can’t do much to alter its body. The Voyager’s design models itself on the Fender Stratocaster (the most popular electric guitar model out there and a hot favorite of Hendrix) and comes with a wooden finish, allowing it to look drastically different from the enamel-coated colorful electric guitars you usually see – a design move which makes sense, given that the Voyager is so unique in its function.

What’s so ground-breaking about the Voyager is its ability to physically be able to model different guitars, without you needing to actually own different guitars. This versatility, aside from having an economical benefit (given that electric guitars can cost anywhere between $300 and $1500), is incredibly convenient for musicians too, allowing them to experiment with new sounds on the fly, or potentially even easily swap out modules mid-concert without worrying about running backstage to get a new guitar (or worse, going through tuning or sound-check all over again!)

The Voyager Modular Electric Guitar comes handmade in either walnut, ash, or cherry wood. The guitar is available as a bundle, including two pickup modules of your choice, and one standard control module, for $1,499… which makes sense considering you’re getting multiple guitars for the price of one. You can buy additional pickup modules for $199 each, allowing you to expand your sound library to include different guitar styles and sounds, without having to empty your wallet.

Designer: Reddick Guitars

Roland’s new mobile mixer aims at turning your smartphone into a full-fledged recording and production studio





The smartphone is already a capable content-creating beast… Roland just makes it better by allowing it to interface with the rest of your pro-recording and production gear.

You can’t plug your electric guitar or studio mic into your smartphone. Believe me, I’ve tried. I fancy myself a bit of a musician and I’ve always wanted to be able to record directly into my smartphone without relying on my phone’s third-grade microphone, but that isn’t possible for multiple reasons – one of them being the fact that tech companies hate putting ports on phones. That’s sort of where Roland comes in with its GO:MIXER PRO-X, a hardware interface that lets you hook multiple recording and musical instruments to your phone, turning it into the ultimate studio. Perfect for mobile-based content creation and impromptu live-streams (something that’s absolutely sparked amidst the pandemic thanks how easy TikTok has made it to be an overnight star), the Roland GO:MIXER PRO-X is a handy, pocket-sized portable mixer that lets you connect your phone to practically every music/performance instrument around you.

Roland GO:MIXER PRO-X Portable Smartphone Recording Studio

Designed to be compatible with iOS as well as Android smartphones, the GO:MIXER PRO-X is a nifty piece of hardware for musicians, performers, presenters, and even podcasters. Just plug it to your smartphone and you suddenly have an entire variety of ports and knobs for all your recording gear. The GO:MIXER PRO-X connects to your smartphone via its USB-C or Lightning-connector interface and supplies power to it too, keeping your phone juiced during your recording/performance. It has dedicated inputs for microphones, guitars, synths, bass, and even drums, while knobs on the top let you control their gain, balancing the audio to your liking.

Roland GO:MIXER PRO-X Portable Smartphone Recording Studio

If you cringe at the idea of having to host a proper professional livestream with AirPods in your ears, the GO:MIXER PRO-X brings back the familiar 3.5mm headphone line-in, allowing you to connect monitoring headphones in to listen to the audio feed going into your phone. You can use it solo, controlling and balancing your sound, or you could switch on your phone’s camera and position yourself in front of it, giving the mixing duties to a fellow colleague or sound-engineer. Instead of needing to have expensive audio/video recording, monitoring, and studio equipment, all you need are your instruments, your smartphone, and the GO:MIXER PRO-X. It’s perfect for musicians, podcasters, radio hosts, DJs, interviewers, and even teachers who conduct online classes. After all, your smartphone’s more-than-capable hardware/software shouldn’t get kneecapped by its inability to connect to pro-grade recording equipment, right?

Designer: Roland

Roland GO:MIXER PRO-X Portable Smartphone Recording Studio

Roland GO:MIXER PRO-X Portable Smartphone Recording Studio

Roland GO:MIXER PRO-X Portable Smartphone Recording Studio

This electric guitar is made out of 5,000 coffee beans (And it smells like coffee too)





Bold, strong, intense. You could use those words to describe coffee… you could also use it to describe this electric guitar built by YouTuber and guitar aficionado, Burls Art. Designed as a gift for his friend’s company Copper Coffee, Burls Art’s guitar body is made from a whopping 5,000 roasted coffee beans suspended in epoxy. Modeled in the shape of a Gibson Explorer, the guitar’s body proudly showcases the coffee beans and the unique texture created by grinding their surface smooth. It’s got a beautifully speckled, dark cork-like texture, and even smells like coffee! The fretboard and headstock are built from scratch too, and the entire guitar sports copper accents (for the aesthetics, but also because the company is literally called Copper Coffee), and the Copper Coffee logo is beautifully inlaid into the fretboard. If you check out the end of the video, Burls Art gives the guitar a spin too, and just like a good Macchiato, it gives me goosebumps!

A close-up look at the guitar’s body reveals the coffee-bean texture. If preserved correctly and maintained well, the beans should easily last decades, Burls Art mentioned after doing a bit of research. The guitar’s body doesn’t just encase the coffee beans in an epoxy outer container. You can see how the coffee-bean cross-sections are visible on the entire surface. The casting process resulted in a fair amount of air bubbles which Burls Art filled with copper epoxy before finishing smooth with a sanding machine and buffing with a coat of polish. The result really speaks for itself, doesn’t it?

The guitar’s body is fitted with two double-coil pickups and aged copper knobs and hardware. The fretboard sports the Copper Coffee logo inlaid into the wood, using a mixture of copper-colored epoxy and silica powder. The headstock, on the other hand, has an actual copper sheeting that’s been fused to the wood before being polished and adorned with the Burls Art logo.

The back of the fretboard reveals an incredible striped pattern almost comparable to snakewood. A closer look at the headstock and fretboard reveals the guitar’s finer details.

It’s unclear how much time it took for Burls Art to make the guitar from scratch, but the YouTube video really details the entire process out from scratch. It starts with pouring the 5,000 coffee beans into a cast and topping it off with epoxy. Ince cured, Burls Art cuts out the basic shape using a large jigsaw machine before using different tools to define the guitar’s shape and smoothen its surface. The fretboard and headstock were built entirely from scratch too, along with the electricals being routed through the guitar’s main body. Burls Art mentions that the body has a pretty distinct coffee smell (which would have been masked if he had coated the body entirely with epoxy), and that his studio smelled like coffee all through the construction process! The coffee guitar now proudly hangs at the Copper Coffee head office in Austin Texas.

Designer: Burls Art

The iconic Fender Stratocaster electric guitar gets immortalized in LEGO, with an amplifier too!

The Fender Stratocaster is often regarded as the most legendary guitar model in rock-history. With legends such as Eric Clapton, George Harrison, Jimi Hendrix, Malmsteen, and Buddy Holly picking it as their guitar of choice, it’s fair to say the Strat (as it’s lovingly called) is a rock icon. It’s even the same guitar that was used for Deep Purple’s Smoke On The Water guitar riff, and for David Gilmour’s guitar solo in Pink Floyd’s Comfortably Numb.

While the guitar attained legendary status nearly half a century ago, LEGO aficionado TOMOELL is finally giving it its rightful place in LEGO’s brick-laden universe. TOMOELL’s LEGO Fender Stratocaster is an immaculate beauty, looking very recognizably like the original. It comes with 6 faux-strings that connect from the bridge all the way down the fretboard to 6 tuning keys (I’m fairly certain those are representational too), and even sports the knobs, pickups, and the vibrato arm that guitarists love to use! Made from 335 LEGO bricks, the Strat is incomplete without its accessories, a 54-piece guitar-stand, a 287-piece Fender amp, and even a tiny foot-pedal for extra effect!

The model comes in as many as 5 colors and stands at approximately 1½ feet tall. It currently is a hot favorite in the LEGO Ideas community, with a lot of the community voting for LEGO to officially produce it as a production-ready kit.

Designer: TOMOELL for LEGO

This electric Ukulele comes with its own speaker and is Bluetooth-enabled!

If you look at Google keyword rankings for the year, the word ‘Ukulele’ began trending in the second half of March, well into the first week of April. The Ukulele is one of those instruments that doesn’t need much effort to pick up, which makes sense why a lot of people gravitated towards it at the beginning of the lockdown. It’s small, portable, and comes with four strings – a feature that’s convenient because you’ve also got four active fingers to press the strings (while your thumb grips the instrument). The Ukulele is also, for the most part, an acoustic instrument. While electric versions of the popular instrument exist, they’ve never really caught on, although the guys at FangCun Design believe they know why… and they have a solution too.

Electric guitars have an attitude that Ukuleles don’t. They’re associated with rock, metal, aggression, and the general demeanor of rebellion… traits that seem too extreme for something as soothing and joyous as a Ukulele. The Yuan Man Ukulele by FangCun Design, however, gives the instrument a makeover, allowing it to remain electric but still be approachable.

The Yuan Man Ukulele comes with a circular body and a matte-black paint job, complete with red nylon strings. It retains its friendly appeal, but does look a little more serious than its acoustic counterpart. The electric uke’s body even serves as a speaker unit, allowing you to play music without being plugged into an amplifier. If you do want to externally route sound, the Ukulele has its own quarter-inch input for standard guitar cables, but its most breakout feature is the fact that the Ukulele even comes with Bluetooth, allowing you to connect it to your smartphone and jam to your favorite tunes as you play them from streaming services like Spotify or Apple Music!

Designer: FangCun Design